From 24659c165247c94eedab5615096f3384f9207e20 Mon Sep 17 00:00:00 2001 From: Mahmoud Date: Tue, 28 May 2019 18:04:34 -0400 Subject: adding QV100 config --- .../tested-cfgs/SM7_QV100/config_volta_islip.icnt | 74 ++++++++ configs/tested-cfgs/SM7_QV100/gpgpusim.config | 201 +++++++++++++++++++++ configs/tested-cfgs/SM7_TITANV/gpgpusim.config | 4 +- .../SM7_TITANV_fastlocalxbar/gpgpusim.config | 190 ------------------- .../tested-cfgs/SM7_V100/config_volta_islip.icnt | 74 -------- configs/tested-cfgs/SM7_V100/gpgpusim.config | 188 ------------------- .../SM7_V100_fastlocalxbar/gpgpusim.config | 190 ------------------- 7 files changed, 278 insertions(+), 643 deletions(-) create mode 100644 configs/tested-cfgs/SM7_QV100/config_volta_islip.icnt create mode 100644 configs/tested-cfgs/SM7_QV100/gpgpusim.config delete mode 100644 configs/tested-cfgs/SM7_TITANV_fastlocalxbar/gpgpusim.config delete mode 100644 configs/tested-cfgs/SM7_V100/config_volta_islip.icnt delete mode 100644 configs/tested-cfgs/SM7_V100/gpgpusim.config delete mode 100644 configs/tested-cfgs/SM7_V100_fastlocalxbar/gpgpusim.config diff --git a/configs/tested-cfgs/SM7_QV100/config_volta_islip.icnt b/configs/tested-cfgs/SM7_QV100/config_volta_islip.icnt new file mode 100644 index 0000000..f6e0833 --- /dev/null +++ b/configs/tested-cfgs/SM7_QV100/config_volta_islip.icnt @@ -0,0 +1,74 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 40; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 164; +n = 1; + +// Routing + +routing_function = dest_tag; + + +// Flow control + +num_vcs = 1; +vc_buf_size = 256; +input_buffer_size = 256; +ejection_buffer_size = 256; +boundary_buffer_size = 256; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 1; +output_speedup = 1; +internal_speedup = 2.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/tested-cfgs/SM7_QV100/gpgpusim.config b/configs/tested-cfgs/SM7_QV100/gpgpusim.config new file mode 100644 index 0000000..16c131b --- /dev/null +++ b/configs/tested-cfgs/SM7_QV100/gpgpusim.config @@ -0,0 +1,201 @@ +# This config models the Volta +# For more info about volta architecture: +# http://images.nvidia.com/content/volta-architecture/pdf/volta-architecture-whitepaper.pdf +# https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8344474&tag=1# +# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf +# https://en.wikipedia.org/wiki/Volta_(microarchitecture) +# https://www.hotchips.org/wp-content/uploads/hc_archives/hc29/HC29.21-Monday-Pub/HC29.21.10-GPU-Gaming-Pub/HC29.21.132-Volta-Choquette-NVIDIA-Final3.pdf +# https://devblogs.nvidia.com/inside-volta/ +# http://on-demand.gputechconf.com/gtc/2017/presentation/s7798-luke-durant-inside-volta.pdf + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 70 + + +# Device Limits +-gpgpu_stack_size_limit 1024 +-gpgpu_heap_size_limit 8388608 +-gpgpu_runtime_sync_depth_limit 2 +-gpgpu_runtime_pending_launch_count_limit 2048 + +# Compute Capability +-gpgpu_compute_capability_major 7 +-gpgpu_compute_capability_minor 0 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 80 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 32 +-gpgpu_n_sub_partition_per_mchannel 2 + +# volta clock domains +#-gpgpu_clock_domains ::: +# Volta NVIDIA TITANV clock domains are adopted from +# https://en.wikipedia.org/wiki/Volta_(microarchitecture) +-gpgpu_clock_domains 1132.0:1132.0:1132.0:850.0 +# boost mode +# -gpgpu_clock_domains 1628.0:1628.0:1628.0:850.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 +-gpgpu_occupancy_sm_number 70 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 32 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB,ID_OC_TENSOR_CORE,OC_EX_TENSOR_CORE +## Volta GV100 has 4 SP SIMD units, 4 SFU units, 4 DP units per core, 4 Tensor core units +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 4,4,4,4,4,4,4,4,4,4,8,4,4 +-gpgpu_num_sp_units 4 +-gpgpu_num_sfu_units 4 +-gpgpu_num_dp_units 4 +-gpgpu_num_int_units 4 +-gpgpu_tensor_core_avail 1 +-gpgpu_num_tensor_core_units 4 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# All Div operations are executed on SFU unit +# Throughput (initiation latency) are adopted from +# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 2,2,2,2,8 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 2,2,2,2,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 4,4,4,4,130 +-ptx_opcode_latency_sfu 100 +-ptx_opcode_initiation_sfu 8 +-ptx_opcode_latency_tesnor 64 +-ptx_opcode_initiation_tensor 64 + +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Defualt config is 32KB DL1 and 96KB shared memory +# In Volta, we assign the remaining shared memory to L1 cache +# if the assigned shd mem = 0, then L1 cache = 128KB +# For more info, see https://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#shared-memory-7-x +# disable this mode in case of multi kernels/apps execution +-adaptive_volta_cache_config 1 +# Volta unified cache has four ports +-mem_unit_ports 4 +-gpgpu_cache:dl1 S:4:128:64,L:L:s:N:L,A:256:8,16:0,32 +-gpgpu_shmem_size 98304 +-gmem_skip_L1D 0 +-icnt_flit_size 40 +-gpgpu_n_cluster_ejection_buffer_size 32 +-l1_latency 28 +-smem_latency 19 +-gpgpu_flush_l1_cache 1 + +# 32 sets, each 128 bytes 24-way for each memory sub partition (96 KB per memory sub partition). This gives us 4.5MB L2 cache +-gpgpu_cache:dl2 S:32:128:24,L:B:m:L:L,A:192:4,32:0,32 +-gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 64:64:64:64 +-perf_sim_memcpy 1 +-memory_partition_indexing 4 + +# 128 KB Inst. +-gpgpu_cache:il1 N:64:128:16,L:R:f:N:L,S:2:48,4 +# 48 KB Tex +# Note, TEX is deprected in Volta, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod +-gpgpu_tex_cache:l1 N:16:128:24,L:R:m:N:L,T:128:4,128:2 +# 64 KB Const +-gpgpu_const_cache:l1 N:128:64:8,L:R:f:N:L,S:2:64,4 + +# Volta has sub core model, in which each scheduler has its own register file and EUs +# i.e. schedulers are isolated +-sub_core_model 1 +# disable specialized operand collectors and use generic operand collectors instead +-enable_specialized_operand_collector 0 +-gpgpu_operand_collector_num_units_gen 8 +-gpgpu_operand_collector_num_in_ports_gen 8 +-gpgpu_operand_collector_num_out_ports_gen 8 +# volta has 8 banks, 4 schedulers, two banks per scheduler +-gpgpu_num_reg_banks 8 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 +-gpgpu_coalesce_arch 60 + +## In Volta, a warp scheduler can issue 1 inst per cycle +-gpgpu_max_insn_issue_per_warp 1 +-gpgpu_dual_issue_diff_exec_units 1 + +# interconnection +-network_mode 1 +-inter_config_file config_volta_islip.icnt +# for local xbar, use: +# "-network_mode 2 -inct_in_buffer_limit 512 -inct_out_buffer_limit 512 -inct_subnets 2" + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 192 + +# for HBM, three stacks, 24 channles, each (128 bits) 16 bytes width +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 16 +-gpgpu_dram_burst_length 2 +-dram_data_command_freq_ratio 2 # HBM is DDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCB.CCCSSSSS + +# HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) +# Timing for 1 GHZ +# tRRDl and tWTR are missing, need to be added +#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: +# CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" + +# Timing for 850 MHZ, V100 HBM runs at 850 MHZ +-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=2:CDLR=3:WR=10:nbkgrp=4:CCDL=2:RTPL=3" + +# HBM has dual bus interface, in which it can issue two col and row commands at a time +-dual_bus_interface 1 +# select lower bits for bnkgrp to increase bnkgrp parallelism +-dram_bnk_indexing_policy 0 +-dram_bnkgrp_indexing_policy 1 + +#-Seperate_Write_Queue_Enable 1 +#-Write_Queue_Size 64:56:32 + +# Volta has four schedulers per core +-gpgpu_num_sched_per_core 4 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs, disable it untill we create a real energy model for Volta +-power_simulation_enabled 0 + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + diff --git a/configs/tested-cfgs/SM7_TITANV/gpgpusim.config b/configs/tested-cfgs/SM7_TITANV/gpgpusim.config index ebd442f..b06f048 100644 --- a/configs/tested-cfgs/SM7_TITANV/gpgpusim.config +++ b/configs/tested-cfgs/SM7_TITANV/gpgpusim.config @@ -137,6 +137,8 @@ # interconnection -network_mode 1 -inter_config_file config_volta_islip.icnt +# for local xbar, use: +# "-network_mode 2 -inct_in_buffer_limit 512 -inct_out_buffer_limit 512 -inct_subnets 2" # memory partition latency config -rop_latency 120 @@ -161,7 +163,7 @@ #-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: # CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" -# Timing for 850 MHZ, Tesla TITANV HBM runs at 850 MHZ +# Timing for 850 MHZ, TITANV HBM runs at 850 MHZ -gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=12:RAS=28:RP=12:RC=40: CL=12:WL=2:CDLR=3:WR=10:nbkgrp=4:CCDL=2:RTPL=3" diff --git a/configs/tested-cfgs/SM7_TITANV_fastlocalxbar/gpgpusim.config b/configs/tested-cfgs/SM7_TITANV_fastlocalxbar/gpgpusim.config deleted file mode 100644 index 4625ac4..0000000 --- a/configs/tested-cfgs/SM7_TITANV_fastlocalxbar/gpgpusim.config +++ /dev/null @@ -1,190 +0,0 @@ -# This config models the Volta Titan V -# For more info about volta architecture: -# http://images.nvidia.com/content/volta-architecture/pdf/volta-architecture-whitepaper.pdf -# https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8344474&tag=1# -# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf -# https://en.wikipedia.org/wiki/Volta_(microarchitecture) -# https://www.hotchips.org/wp-content/uploads/hc_archives/hc29/HC29.21-Monday-Pub/HC29.21.10-GPU-Gaming-Pub/HC29.21.132-Volta-Choquette-NVIDIA-Final3.pdf -# https://devblogs.nvidia.com/inside-volta/ -# http://on-demand.gputechconf.com/gtc/2017/presentation/s7798-luke-durant-inside-volta.pdf - -# functional simulator specification --gpgpu_ptx_instruction_classification 0 --gpgpu_ptx_sim_mode 0 --gpgpu_ptx_force_max_capability 70 - -# SASS execution (only supported with CUDA >= 4.0) --gpgpu_ptx_convert_to_ptxplus 0 --gpgpu_ptx_save_converted_ptxplus 0 - -# high level architecture configuration --gpgpu_n_clusters 40 --gpgpu_n_cores_per_cluster 2 --gpgpu_n_mem 24 --gpgpu_n_sub_partition_per_mchannel 2 - -# volta clock domains -#-gpgpu_clock_domains ::: -# Volta NVIDIA TITANV clock domains are adopted from -# https://en.wikipedia.org/wiki/Volta_(microarchitecture) --gpgpu_clock_domains 1200.0:1200.0:1200.0:850.0 -# boost mode -# -gpgpu_clock_domains 1455.0:1455.0:1455.0:850.0 - -# shader core pipeline config --gpgpu_shader_registers 65536 --gpgpu_occupancy_sm_number 70 - -# This implies a maximum of 64 warps/SM --gpgpu_shader_core_pipeline 2048:32 --gpgpu_shader_cta 32 --gpgpu_simd_model 1 - -# Pipeline widths and number of FUs -# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB,ID_OC_TENSOR_CORE,OC_EX_TENSOR_CORE -## Volta TITANV has 4 SP SIMD units, 4 SFU units, 4 DP units per core, 4 Tensor core units -## we need to scale the number of pipeline registers to be equal to the number of SP units --gpgpu_pipeline_widths 4,4,4,4,4,4,4,4,4,4,8,4,4 --gpgpu_num_sp_units 4 --gpgpu_num_sfu_units 4 --gpgpu_num_dp_units 4 --gpgpu_num_int_units 4 --gpgpu_tensor_core_avail 1 --gpgpu_num_tensor_core_units 4 - -# Instruction latencies and initiation intervals -# "ADD,MAX,MUL,MAD,DIV" -# All Div operations are executed on SFU unit -# Throughput (initiation latency) are adopted from -# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf --ptx_opcode_latency_int 4,13,4,5,145 --ptx_opcode_initiation_int 2,2,2,2,8 --ptx_opcode_latency_fp 4,13,4,5,39 --ptx_opcode_initiation_fp 2,2,2,2,4 --ptx_opcode_latency_dp 8,19,8,8,330 --ptx_opcode_initiation_dp 4,4,4,4,130 --ptx_opcode_latency_sfu 100 --ptx_opcode_initiation_sfu 8 --ptx_opcode_latency_tesnor 64 --ptx_opcode_initiation_tensor 64 - -# ::,::::,::,:** -# ** Optional parameter - Required when mshr_type==Texture Fifo -# Defualt config is 32KB DL1 and 96KB shared memory -# In Volta, we assign the remaining shared memory to L1 cache -# if the assigned shd mem = 0, then L1 cache = 128KB -# For more info, see https://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#shared-memory-7-x -# disable this mode in case of multi kernels/apps execution --adaptive_volta_cache_config 1 -# Volta unified cache has four ports --mem_unit_ports 4 --gpgpu_cache:dl1 S:4:128:64,L:L:s:N:L,A:256:8,16:0,32 --gpgpu_shmem_size 98304 --gmem_skip_L1D 0 --icnt_flit_size 40 --gpgpu_n_cluster_ejection_buffer_size 32 --l1_latency 28 --smem_latency 19 --gpgpu_flush_l1_cache 1 - -# 32 sets, each 128 bytes 24-way for each memory sub partition (96 KB per memory sub partition). This gives us 4.5MB L2 cache --gpgpu_cache:dl2 S:32:128:24,L:B:m:L:L,A:192:4,32:0,32 --gpgpu_cache:dl2_texture_only 0 --gpgpu_dram_partition_queues 64:64:64:64 --perf_sim_memcpy 1 --memory_partition_indexing 0 - -# 128 KB Inst. --gpgpu_cache:il1 N:64:128:16,L:R:f:N:L,S:2:48,4 -# 48 KB Tex -# Note, TEX is deprected in Volta, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod --gpgpu_tex_cache:l1 N:16:128:24,L:R:m:N:L,T:128:4,128:2 -# 64 KB Const --gpgpu_const_cache:l1 N:128:64:8,L:R:f:N:L,S:2:64,4 - -# Volta has sub core model, in which each scheduler has its own register file and EUs -# i.e. schedulers are isolated --sub_core_model 1 -# disable specialized operand collectors and use generic operand collectors instead --enable_specialized_operand_collector 0 --gpgpu_operand_collector_num_units_gen 8 --gpgpu_operand_collector_num_in_ports_gen 8 --gpgpu_operand_collector_num_out_ports_gen 8 -# volta has 8 banks, 4 schedulers, two banks per scheduler --gpgpu_num_reg_banks 8 - -# shared memory bankconflict detection --gpgpu_shmem_num_banks 32 --gpgpu_shmem_limited_broadcast 0 --gpgpu_shmem_warp_parts 1 --gpgpu_coalesce_arch 60 - -## In Volta, a warp scheduler can issue 1 inst per cycle --gpgpu_max_insn_issue_per_warp 1 --gpgpu_dual_issue_diff_exec_units 1 - -# use local xbar interconnection --network_mode 2 --inct_in_buffer_limit 512 --inct_out_buffer_limit 512 --inct_subnets 2 - -# memory partition latency config --rop_latency 120 --dram_latency 100 - -# dram model config --gpgpu_dram_scheduler 1 --gpgpu_frfcfs_dram_sched_queue_size 64 --gpgpu_dram_return_queue_size 192 - -# for HBM, three stacks, 24 channles, each (128 bits) 16 bytes width --gpgpu_n_mem_per_ctrlr 1 --gpgpu_dram_buswidth 16 --gpgpu_dram_burst_length 2 --dram_data_command_freq_ratio 2 # HBM is DDR --gpgpu_mem_address_mask 1 --gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCB.CCCSSSSS - -# HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) -# Timing for 1 GHZ -# tRRDl and tWTR are missing, need to be added -#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: -# CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" - -# Timing for 850 MHZ, Tesla TITANV V100 HBM runs at 850 MHZ --gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=12:RAS=28:RP=12:RC=40: - CL=12:WL=2:CDLR=3:WR=10:nbkgrp=4:CCDL=2:RTPL=3" - -# HBM has dual bus interface, in which it can issue two col and row commands at a time --dual_bus_interface 1 -# select lower bits for bnkgrp to increase bnkgrp parallelism --dram_bnk_indexing_policy 0 --dram_bnkgrp_indexing_policy 1 - -#-Seperate_Write_Queue_Enable 1 -#-Write_Queue_Size 64:56:32 - -# Volta has four schedulers per core --gpgpu_num_sched_per_core 4 -# Two Level Scheduler with active and pending pools -#-gpgpu_scheduler two_level_active:6:0:1 -# Loose round robbin scheduler -#-gpgpu_scheduler lrr -# Greedy then oldest scheduler --gpgpu_scheduler gto - -# stat collection --gpgpu_memlatency_stat 14 --gpgpu_runtime_stat 500 --enable_ptx_file_line_stats 1 --visualizer_enabled 0 - -# power model configs, disable it untill we create a real energy model for Volta --power_simulation_enabled 0 - -# tracing functionality -#-trace_enabled 1 -#-trace_components WARP_SCHEDULER,SCOREBOARD -#-trace_sampling_core 0 - diff --git a/configs/tested-cfgs/SM7_V100/config_volta_islip.icnt b/configs/tested-cfgs/SM7_V100/config_volta_islip.icnt deleted file mode 100644 index f6e0833..0000000 --- a/configs/tested-cfgs/SM7_V100/config_volta_islip.icnt +++ /dev/null @@ -1,74 +0,0 @@ -//21*1 fly with 32 flits per packet under gpgpusim injection mode -use_map = 0; -flit_size = 40; - -// currently we do not use this, see subnets below -network_count = 2; - -// Topology -topology = fly; -k = 164; -n = 1; - -// Routing - -routing_function = dest_tag; - - -// Flow control - -num_vcs = 1; -vc_buf_size = 256; -input_buffer_size = 256; -ejection_buffer_size = 256; -boundary_buffer_size = 256; - -wait_for_tail_credit = 0; - -// Router architecture - -vc_allocator = islip; //separable_input_first; -sw_allocator = islip; //separable_input_first; -alloc_iters = 1; - -credit_delay = 0; -routing_delay = 0; -vc_alloc_delay = 1; -sw_alloc_delay = 1; - -input_speedup = 1; -output_speedup = 1; -internal_speedup = 2.0; - -// Traffic, GPGPU-Sim does not use this - -traffic = uniform; -packet_size ={{1,2,3,4},{10,20}}; -packet_size_rate={{1,1,1,1},{2,1}}; - -// Simulation - Don't change - -sim_type = gpgpusim; -//sim_type = latency; -injection_rate = 0.1; - -subnets = 2; - -// Always use read and write no matter following line -//use_read_write = 1; - - -read_request_subnet = 0; -read_reply_subnet = 1; -write_request_subnet = 0; -write_reply_subnet = 1; - -read_request_begin_vc = 0; -read_request_end_vc = 0; -write_request_begin_vc = 0; -write_request_end_vc = 0; -read_reply_begin_vc = 0; -read_reply_end_vc = 0; -write_reply_begin_vc = 0; -write_reply_end_vc = 0; - diff --git a/configs/tested-cfgs/SM7_V100/gpgpusim.config b/configs/tested-cfgs/SM7_V100/gpgpusim.config deleted file mode 100644 index ef93cea..0000000 --- a/configs/tested-cfgs/SM7_V100/gpgpusim.config +++ /dev/null @@ -1,188 +0,0 @@ -# This config models the Volta -# For more info about volta architecture: -# http://images.nvidia.com/content/volta-architecture/pdf/volta-architecture-whitepaper.pdf -# https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8344474&tag=1# -# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf -# https://en.wikipedia.org/wiki/Volta_(microarchitecture) -# https://www.hotchips.org/wp-content/uploads/hc_archives/hc29/HC29.21-Monday-Pub/HC29.21.10-GPU-Gaming-Pub/HC29.21.132-Volta-Choquette-NVIDIA-Final3.pdf -# https://devblogs.nvidia.com/inside-volta/ -# http://on-demand.gputechconf.com/gtc/2017/presentation/s7798-luke-durant-inside-volta.pdf - -# functional simulator specification --gpgpu_ptx_instruction_classification 0 --gpgpu_ptx_sim_mode 0 --gpgpu_ptx_force_max_capability 70 - -# SASS execution (only supported with CUDA >= 4.0) --gpgpu_ptx_convert_to_ptxplus 0 --gpgpu_ptx_save_converted_ptxplus 0 - -# high level architecture configuration --gpgpu_n_clusters 80 --gpgpu_n_cores_per_cluster 1 --gpgpu_n_mem 32 --gpgpu_n_sub_partition_per_mchannel 2 - -# volta clock domains -#-gpgpu_clock_domains ::: -# Volta NVIDIA V100 clock domains are adopted from -# https://en.wikipedia.org/wiki/Nvidia_Tesla --gpgpu_clock_domains 1200.0:1200.0:1200.0:875.0 -# boost mode -# -gpgpu_clock_domains 1455.0:1455.0:1455.0:875.0 - -# shader core pipeline config --gpgpu_shader_registers 65536 --gpgpu_occupancy_sm_number 70 - -# This implies a maximum of 64 warps/SM --gpgpu_shader_core_pipeline 2048:32 --gpgpu_shader_cta 32 --gpgpu_simd_model 1 - -# Pipeline widths and number of FUs -# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB,ID_OC_TENSOR_CORE,OC_EX_TENSOR_CORE -## Volta GV100 has 4 SP SIMD units, 4 SFU units, 4 DP units per core, 4 Tensor core units -## we need to scale the number of pipeline registers to be equal to the number of SP units --gpgpu_pipeline_widths 4,4,4,4,4,4,4,4,4,4,8,4,4 --gpgpu_num_sp_units 4 --gpgpu_num_sfu_units 4 --gpgpu_num_dp_units 4 --gpgpu_num_int_units 4 --gpgpu_tensor_core_avail 1 --gpgpu_num_tensor_core_units 4 - -# Instruction latencies and initiation intervals -# "ADD,MAX,MUL,MAD,DIV" -# All Div operations are executed on SFU unit -# Throughput (initiation latency) are adopted from -# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf --ptx_opcode_latency_int 4,13,4,5,145 --ptx_opcode_initiation_int 2,2,2,2,8 --ptx_opcode_latency_fp 4,13,4,5,39 --ptx_opcode_initiation_fp 2,2,2,2,4 --ptx_opcode_latency_dp 8,19,8,8,330 --ptx_opcode_initiation_dp 4,4,4,4,130 --ptx_opcode_latency_sfu 100 --ptx_opcode_initiation_sfu 8 --ptx_opcode_latency_tesnor 64 --ptx_opcode_initiation_tensor 64 - -# ::,::::,::,:** -# ** Optional parameter - Required when mshr_type==Texture Fifo -# Defualt config is 32KB DL1 and 96KB shared memory -# In Volta, we assign the remaining shared memory to L1 cache -# if the assigned shd mem = 0, then L1 cache = 128KB -# For more info, see https://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#shared-memory-7-x -# disable this mode in case of multi kernels/apps execution --adaptive_volta_cache_config 1 -# Volta unified cache has four ports --mem_unit_ports 4 --gpgpu_cache:dl1 S:4:128:64,L:L:s:N:L,A:256:8,16:0,32 --gpgpu_shmem_size 98304 --gmem_skip_L1D 0 --icnt_flit_size 40 --gpgpu_n_cluster_ejection_buffer_size 32 --l1_latency 28 --smem_latency 19 --gpgpu_flush_l1_cache 1 - -# 32 sets, each 128 bytes 24-way for each memory sub partition (96 KB per memory sub partition). This gives us 4.5MB L2 cache --gpgpu_cache:dl2 S:32:128:24,L:B:m:L:L,A:192:4,32:0,32 --gpgpu_cache:dl2_texture_only 0 --gpgpu_dram_partition_queues 64:64:64:64 --perf_sim_memcpy 1 --memory_partition_indexing 4 - -# 128 KB Inst. --gpgpu_cache:il1 N:64:128:16,L:R:f:N:L,S:2:48,4 -# 48 KB Tex -# Note, TEX is deprected in Volta, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod --gpgpu_tex_cache:l1 N:16:128:24,L:R:m:N:L,T:128:4,128:2 -# 64 KB Const --gpgpu_const_cache:l1 N:128:64:8,L:R:f:N:L,S:2:64,4 - -# Volta has sub core model, in which each scheduler has its own reisiter file and EUs -# i.e. schedulers are isolated --sub_core_model 1 -# disable specialized operand collectors and use generic operand collectors instead --enable_specialized_operand_collector 0 --gpgpu_operand_collector_num_units_gen 8 --gpgpu_operand_collector_num_in_ports_gen 8 --gpgpu_operand_collector_num_out_ports_gen 8 -# volta has 8 banks, 4 schedulers, two banks per scheduler --gpgpu_num_reg_banks 8 - -# shared memory bankconflict detection --gpgpu_shmem_num_banks 32 --gpgpu_shmem_limited_broadcast 0 --gpgpu_shmem_warp_parts 1 --gpgpu_coalesce_arch 60 - -## In Volta, a warp scheduler can issue 1 inst per cycle --gpgpu_max_insn_issue_per_warp 1 --gpgpu_dual_issue_diff_exec_units 1 - -# interconnection --network_mode 1 --inter_config_file config_volta_islip.icnt - -# memory partition latency config --rop_latency 120 --dram_latency 100 - -# dram model config --gpgpu_dram_scheduler 1 --gpgpu_frfcfs_dram_sched_queue_size 64 --gpgpu_dram_return_queue_size 192 - -# for HBM, three stacks, 24 channles, each (128 bits) 16 bytes width --gpgpu_n_mem_per_ctrlr 1 --gpgpu_dram_buswidth 16 --gpgpu_dram_burst_length 2 --dram_data_command_freq_ratio 2 # HBM is DDR --gpgpu_mem_address_mask 1 --gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCB.CCCSSSSS - -# HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) -# Timing for 1 GHZ -# tRRDl and tWTR are missing, need to be added -#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: -# CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" - -# Timing for 850 MHZ, Tesla TITANV V100 HBM runs at 850 MHZ --gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=12:RAS=28:RP=12:RC=40: - CL=12:WL=2:CDLR=3:WR=10:nbkgrp=4:CCDL=2:RTPL=3" - -# HBM has dual bus interface, in which it can issue two col and row commands at a time --dual_bus_interface 1 -# select lower bits for bnkgrp to increase bnkgrp parallelism --dram_bnk_indexing_policy 0 --dram_bnkgrp_indexing_policy 1 - -#-Seperate_Write_Queue_Enable 1 -#-Write_Queue_Size 64:56:32 - -# Volta has four schedulers per core --gpgpu_num_sched_per_core 4 -# Two Level Scheduler with active and pending pools -#-gpgpu_scheduler two_level_active:6:0:1 -# Loose round robbin scheduler -#-gpgpu_scheduler lrr -# Greedy then oldest scheduler --gpgpu_scheduler gto - -# stat collection --gpgpu_memlatency_stat 14 --gpgpu_runtime_stat 500 --enable_ptx_file_line_stats 1 --visualizer_enabled 0 - -# power model configs, disable it untill we create a real energy model for Volta --power_simulation_enabled 0 - -# tracing functionality -#-trace_enabled 1 -#-trace_components WARP_SCHEDULER,SCOREBOARD -#-trace_sampling_core 0 - diff --git a/configs/tested-cfgs/SM7_V100_fastlocalxbar/gpgpusim.config b/configs/tested-cfgs/SM7_V100_fastlocalxbar/gpgpusim.config deleted file mode 100644 index 66f5251..0000000 --- a/configs/tested-cfgs/SM7_V100_fastlocalxbar/gpgpusim.config +++ /dev/null @@ -1,190 +0,0 @@ -# This config models the Volta -# For more info about volta architecture: -# http://images.nvidia.com/content/volta-architecture/pdf/volta-architecture-whitepaper.pdf -# https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8344474&tag=1# -# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf -# https://en.wikipedia.org/wiki/Volta_(microarchitecture) -# https://www.hotchips.org/wp-content/uploads/hc_archives/hc29/HC29.21-Monday-Pub/HC29.21.10-GPU-Gaming-Pub/HC29.21.132-Volta-Choquette-NVIDIA-Final3.pdf -# https://devblogs.nvidia.com/inside-volta/ -# http://on-demand.gputechconf.com/gtc/2017/presentation/s7798-luke-durant-inside-volta.pdf - -# functional simulator specification --gpgpu_ptx_instruction_classification 0 --gpgpu_ptx_sim_mode 0 --gpgpu_ptx_force_max_capability 70 - -# SASS execution (only supported with CUDA >= 4.0) --gpgpu_ptx_convert_to_ptxplus 0 --gpgpu_ptx_save_converted_ptxplus 0 - -# high level architecture configuration --gpgpu_n_clusters 80 --gpgpu_n_cores_per_cluster 1 --gpgpu_n_mem 32 --gpgpu_n_sub_partition_per_mchannel 2 - -# volta clock domains -#-gpgpu_clock_domains ::: -# Volta NVIDIA V100 clock domains are adopted from -# https://en.wikipedia.org/wiki/Nvidia_Tesla --gpgpu_clock_domains 1200.0:1200.0:1200.0:875.0 -# boost mode -# -gpgpu_clock_domains 1455.0:1455.0:1455.0:875.0 - -# shader core pipeline config --gpgpu_shader_registers 65536 --gpgpu_occupancy_sm_number 70 - -# This implies a maximum of 64 warps/SM --gpgpu_shader_core_pipeline 2048:32 --gpgpu_shader_cta 32 --gpgpu_simd_model 1 - -# Pipeline widths and number of FUs -# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB,ID_OC_TENSOR_CORE,OC_EX_TENSOR_CORE -## Volta GV100 has 4 SP SIMD units, 4 SFU units, 4 DP units per core, 4 Tensor core units -## we need to scale the number of pipeline registers to be equal to the number of SP units --gpgpu_pipeline_widths 4,4,4,4,4,4,4,4,4,4,8,4,4 --gpgpu_num_sp_units 4 --gpgpu_num_sfu_units 4 --gpgpu_num_dp_units 4 --gpgpu_num_int_units 4 --gpgpu_tensor_core_avail 1 --gpgpu_num_tensor_core_units 4 - -# Instruction latencies and initiation intervals -# "ADD,MAX,MUL,MAD,DIV" -# All Div operations are executed on SFU unit -# Throughput (initiation latency) are adopted from -# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf --ptx_opcode_latency_int 4,13,4,5,145 --ptx_opcode_initiation_int 2,2,2,2,8 --ptx_opcode_latency_fp 4,13,4,5,39 --ptx_opcode_initiation_fp 2,2,2,2,4 --ptx_opcode_latency_dp 8,19,8,8,330 --ptx_opcode_initiation_dp 4,4,4,4,130 --ptx_opcode_latency_sfu 100 --ptx_opcode_initiation_sfu 8 --ptx_opcode_latency_tesnor 64 --ptx_opcode_initiation_tensor 64 - -# ::,::::,::,:** -# ** Optional parameter - Required when mshr_type==Texture Fifo -# Defualt config is 32KB DL1 and 96KB shared memory -# In Volta, we assign the remaining shared memory to L1 cache -# if the assigned shd mem = 0, then L1 cache = 128KB -# For more info, see https://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#shared-memory-7-x -# disable this mode in case of multi kernels/apps execution --adaptive_volta_cache_config 1 -# Volta unified cache has four ports --mem_unit_ports 4 --gpgpu_cache:dl1 S:4:128:64,L:L:s:N:L,A:256:8,16:0,32 --gpgpu_shmem_size 98304 --gmem_skip_L1D 0 --icnt_flit_size 40 --gpgpu_n_cluster_ejection_buffer_size 32 --l1_latency 28 --smem_latency 19 --gpgpu_flush_l1_cache 1 - -# 32 sets, each 128 bytes 24-way for each memory sub partition (96 KB per memory sub partition). This gives us 4.5MB L2 cache --gpgpu_cache:dl2 S:32:128:24,L:B:m:L:L,A:192:4,32:0,32 --gpgpu_cache:dl2_texture_only 0 --gpgpu_dram_partition_queues 64:64:64:64 --perf_sim_memcpy 1 --memory_partition_indexing 4 - -# 128 KB Inst. --gpgpu_cache:il1 N:64:128:16,L:R:f:N:L,S:2:48,4 -# 48 KB Tex -# Note, TEX is deprected in Volta, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod --gpgpu_tex_cache:l1 N:16:128:24,L:R:m:N:L,T:128:4,128:2 -# 64 KB Const --gpgpu_const_cache:l1 N:128:64:8,L:R:f:N:L,S:2:64,4 - -# Volta has sub core model, in which each scheduler has its own reisiter file and EUs -# i.e. schedulers are isolated --sub_core_model 1 -# disable specialized operand collectors and use generic operand collectors instead --enable_specialized_operand_collector 0 --gpgpu_operand_collector_num_units_gen 8 --gpgpu_operand_collector_num_in_ports_gen 8 --gpgpu_operand_collector_num_out_ports_gen 8 -# volta has 8 banks, 4 schedulers, two banks per scheduler --gpgpu_num_reg_banks 8 - -# shared memory bankconflict detection --gpgpu_shmem_num_banks 32 --gpgpu_shmem_limited_broadcast 0 --gpgpu_shmem_warp_parts 1 --gpgpu_coalesce_arch 60 - -## In Volta, a warp scheduler can issue 1 inst per cycle --gpgpu_max_insn_issue_per_warp 1 --gpgpu_dual_issue_diff_exec_units 1 - -# use local xbar interconnection --network_mode 2 --inct_in_buffer_limit 512 --inct_out_buffer_limit 512 --inct_subnets 2 - -# memory partition latency config --rop_latency 120 --dram_latency 100 - -# dram model config --gpgpu_dram_scheduler 1 --gpgpu_frfcfs_dram_sched_queue_size 64 --gpgpu_dram_return_queue_size 192 - -# for HBM, three stacks, 24 channles, each (128 bits) 16 bytes width --gpgpu_n_mem_per_ctrlr 1 --gpgpu_dram_buswidth 16 --gpgpu_dram_burst_length 2 --dram_data_command_freq_ratio 2 # HBM is DDR --gpgpu_mem_address_mask 1 --gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCB.CCCSSSSS - -# HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) -# Timing for 1 GHZ -# tRRDl and tWTR are missing, need to be added -#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: -# CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" - -# Timing for 850 MHZ, Tesla V100 HBM runs at 850 MHZ --gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=12:RAS=28:RP=12:RC=40: - CL=12:WL=2:CDLR=3:WR=10:nbkgrp=4:CCDL=2:RTPL=3" - -# HBM has dual bus interface, in which it can issue two col and row commands at a time --dual_bus_interface 1 -# select lower bits for bnkgrp to increase bnkgrp parallelism --dram_bnk_indexing_policy 0 --dram_bnkgrp_indexing_policy 1 - -#-Seperate_Write_Queue_Enable 1 -#-Write_Queue_Size 64:56:32 - -# Volta has four schedulers per core --gpgpu_num_sched_per_core 4 -# Two Level Scheduler with active and pending pools -#-gpgpu_scheduler two_level_active:6:0:1 -# Loose round robbin scheduler -#-gpgpu_scheduler lrr -# Greedy then oldest scheduler --gpgpu_scheduler gto - -# stat collection --gpgpu_memlatency_stat 14 --gpgpu_runtime_stat 500 --enable_ptx_file_line_stats 1 --visualizer_enabled 0 - -# power model configs, disable it untill we create a real energy model for Volta --power_simulation_enabled 0 - -# tracing functionality -#-trace_enabled 1 -#-trace_components WARP_SCHEDULER,SCOREBOARD -#-trace_sampling_core 0 - -- cgit v1.3