From 3e718d76b0e6ab9691648a02672d44f5da98462e Mon Sep 17 00:00:00 2001 From: speverel Date: Fri, 18 Aug 2017 14:17:42 -0700 Subject: Added configuration for NVIDIA GeForce GTX1080Ti --- configs/GeForceGTX1080Ti/config_fermi_islip.icnt | 70 +++ configs/GeForceGTX1080Ti/gpgpusim.config | 149 +++++++ configs/GeForceGTX1080Ti/gpuwattch_gtx1080Ti.xml | 538 +++++++++++++++++++++++ 3 files changed, 757 insertions(+) create mode 100644 configs/GeForceGTX1080Ti/config_fermi_islip.icnt create mode 100644 configs/GeForceGTX1080Ti/gpgpusim.config create mode 100755 configs/GeForceGTX1080Ti/gpuwattch_gtx1080Ti.xml diff --git a/configs/GeForceGTX1080Ti/config_fermi_islip.icnt b/configs/GeForceGTX1080Ti/config_fermi_islip.icnt new file mode 100644 index 0000000..2a69ddd --- /dev/null +++ b/configs/GeForceGTX1080Ti/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 50; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/GeForceGTX1080Ti/gpgpusim.config b/configs/GeForceGTX1080Ti/gpgpusim.config new file mode 100644 index 0000000..47c2b6a --- /dev/null +++ b/configs/GeForceGTX1080Ti/gpgpusim.config @@ -0,0 +1,149 @@ +# This config models the Pascal GP102 (GeForceGTX 1080Ti) + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 20 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 28 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 11 +-gpgpu_n_sub_partition_per_mchannel 2 + +# Pascal clock domains +#-gpgpu_clock_domains ::: +# Pascal NVIDIA TITAN X clock domains are adopted from +# https://en.wikipedia.org/wiki/GeForce_10_series +-gpgpu_clock_domains 1481.0:2962.0:1481.0:2750.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 32 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +## Pascal GP102 has 4 SP SIMD units and 1 SFU unit +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 4,1,1,4,1,1,6 +-gpgpu_num_sp_units 4 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# SFU is 32-width in pascal, then dp units initiation is 1 cycle +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,2,2,2,8 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 1,2,1,1,130 + +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +# Pascal GP102 has 96KB Shared memory +# Pascal GP102 has 64KB L1 cache +# The default is to disable the L1 cache, unless cache modifieres is used +-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:128:8,8 +-gpgpu_shmem_size 98304 +-gmem_skip_L1D 1 + +# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 3MB L2 cache +-gpgpu_cache:dl2 64:128:16,L:B:m:W:L,A:1024:1024,4:0,32 # used to be 128:4 +-gpgpu_cache:dl2_texture_only 0 + +# 4 KB Inst. +-gpgpu_cache:il1 8:128:4,L:R:f:N:L,A:2:48,4 +# 48 KB Tex +-gpgpu_tex_cache:l1 16:128:24,L:R:m:N:L,F:128:4,128:2 +# 12 KB Const +-gpgpu_const_cache:l1 128:64:2,L:R:f:N:L,A:2:64,4 + +# enable operand collector +## larger operand collectors and reg_banks are needed for the 4 warp schedulers and 4 SIMD units +-gpgpu_operand_collector_num_units_sp 20 +-gpgpu_operand_collector_num_units_sfu 4 +-gpgpu_operand_collector_num_units_mem 8 +-gpgpu_operand_collector_num_in_ports_sp 4 +-gpgpu_operand_collector_num_out_ports_sp 4 +-gpgpu_operand_collector_num_in_ports_sfu 1 +-gpgpu_operand_collector_num_out_ports_sfu 1 +-gpgpu_operand_collector_num_in_ports_mem 1 +-gpgpu_operand_collector_num_out_ports_mem 1 +# gpgpu_num_reg_banks should be increased to 32, but it gives an error! +-gpgpu_num_reg_banks 32 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +## In Pascal, a warp scheduler can issue 2 insts per cycle +-gpgpu_max_insn_issue_per_warp 2 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 116 + +# for NVIDIA GeForceGTX 1080Ti, bus width is 352bits (11 DRAM chips x 32 bits) +# 11 memory paritions, 4 bytes (1 DRAM chip) per memory partition +# the atom size of GDDR5X (the smallest read request) is 32 bytes +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5X is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS + +# Use the same GDDR5 timing from hynix H5GQ1H24AFR +# disable bank groups for now, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=1:CCDL=0:RTPL=0" + +# Pascal has four schedulers per core +-gpgpu_num_sched_per_core 2 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +-power_simulation_enabled 1 +-gpuwattch_xml_file gpuwattch_gtx1080Ti.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + diff --git a/configs/GeForceGTX1080Ti/gpuwattch_gtx1080Ti.xml b/configs/GeForceGTX1080Ti/gpuwattch_gtx1080Ti.xml new file mode 100755 index 0000000..02619ff --- /dev/null +++ b/configs/GeForceGTX1080Ti/gpuwattch_gtx1080Ti.xml @@ -0,0 +1,538 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + -- cgit v1.3 From 97a37f639b25ffed12f7222ac45d1f17dff56c83 Mon Sep 17 00:00:00 2001 From: tgrogers Date: Fri, 18 Aug 2017 21:06:04 -0400 Subject: Adding in a new travis test for the new config --- .travis.yml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/.travis.yml b/.travis.yml index fabfc5b..6ef6730 100644 --- a/.travis.yml +++ b/.travis.yml @@ -19,5 +19,7 @@ matrix: env: CONFIG=configs.quadro5800.yml - services: docker env: CONFIG=configs.teslac2050.yml + - services: docker + env: CONFIG=configs.gtx1080ti.yml script: docker run -v `pwd`:/home/runner/gpgpu-sim_distribution:rw tgrogers/gpgpu-sim_regress:latest /bin/bash -c "./start_torque.sh; chown -R runner /home/runner/gpgpu-sim_distribution; su - runner -c 'source /home/runner/gpgpu-sim_distribution/setup_environment && make -j -C /home/runner/gpgpu-sim_distribution && cd /home/runner/gpgpu-sim_simulations/ && git pull && /home/runner/gpgpu-sim_simulations/util/job_launching/run_simulations.py -c /home/runner/gpgpu-sim_simulations/util/job_launching/regression_recipies/rodinia_2.0-ft/$CONFIG -N regress && /home/runner/gpgpu-sim_simulations/util/job_launching/monitor_func_test.py -v -N regress'" -- cgit v1.3 From 2ec7cb00b1beb7854e0a4493dbeef130a996a19d Mon Sep 17 00:00:00 2001 From: Mengchi Zhang Date: Sat, 9 Sep 2017 02:09:27 -0400 Subject: Modify import to make matplotlib compatible with new python Signed-off-by: Mengchi Zhang --- aerialvision/guiclasses.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/aerialvision/guiclasses.py b/aerialvision/guiclasses.py index 0a7013b..45fed26 100644 --- a/aerialvision/guiclasses.py +++ b/aerialvision/guiclasses.py @@ -69,7 +69,7 @@ import matplotlib matplotlib.use('TkAgg') from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg, NavigationToolbar2TkAgg from matplotlib.figure import Figure -from matplotlib import mpl +import matplotlib as mpl from matplotlib.colors import colorConverter from matplotlib import pyplot import Pmw -- cgit v1.3 From c3977ebf0549c2fd2d82d761008c172c74fcd113 Mon Sep 17 00:00:00 2001 From: tgrogers Date: Tue, 20 Mar 2018 14:47:54 -0400 Subject: Adding in some setupscript stuff to properly print the build version and get rid of this not fully tested warning --- setup_environment | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/setup_environment b/setup_environment index 854a335..96cc362 100644 --- a/setup_environment +++ b/setup_environment @@ -6,7 +6,11 @@ export GPGPUSIM_SETUP_ENVIRONMENT_WAS_RUN= export GPGPUSIM_ROOT="$( cd "$( dirname "$BASH_SOURCE" )" && pwd )" GPGPUSIM_VERSION_STRING=`cat $GPGPUSIM_ROOT/version | awk '/Version/ {print $8}'` -GPGPUSIM_BUILD_STRING=`cat $GPGPUSIM_ROOT/version | awk '/Change/ {print $6}'` +#Detect Git branch and commit # +GIT_COMMIT=`git log -n 1 | head -1 | sed -re 's/commit (.*)/\1/'` +GIT_FILES_CHANGED=`git diff --numstat --cached && git diff --numstat | wc | sed -re 's/^\s+([0-9]+).*/\1/'` +GPGPUSIM_BUILD_STRING="gpgpu-sim_git-commit-$GIT_COMMIT-modified_$GIT_FILES_CHANGED" + echo -n "GPGPU-Sim version $GPGPUSIM_VERSION_STRING (build $GPGPUSIM_BUILD_STRING) "; if [ ! -n "$CUDA_INSTALL_PATH" ]; then @@ -43,11 +47,9 @@ CC_VERSION=`gcc --version | head -1 | awk '{for(i=1;i<=NF;i++){ if(match($i,/^[0 CUDA_VERSION_STRING=`$CUDA_INSTALL_PATH/bin/nvcc --version | awk '/release/ {print $5;}' | sed 's/,//'`; CUDA_VERSION_NUMBER=`echo $CUDA_VERSION_STRING | sed 's/\./ /' | awk '{printf("%02u%02u", 10*int($1), 10*$2);}'` -if [ $CUDA_VERSION_NUMBER -gt 8000 -o $CUDA_VERSION_NUMBER -lt 2030 ]; then +if [ $CUDA_VERSION_NUMBER -gt 9100 -o $CUDA_VERSION_NUMBER -lt 2030 ]; then echo "ERROR ** GPGPU-Sim version $GPGPUSIM_VERSION_STRING not tested with CUDA version $CUDA_VERSION_STRING (please see README)"; return -elif [ $CUDA_VERSION_NUMBER -gt 4020 ]; then - echo "WARNING ** GPGPU-Sim version $GPGPUSIM_VERSION_STRING not fully tested with CUDA version $CUDA_VERSION_STRING (please see README)"; fi if [ $# = '1' ] ; -- cgit v1.3 From e97f396d5892d1c7549b18e95787fb635dff4851 Mon Sep 17 00:00:00 2001 From: tgrogers Date: Thu, 22 Mar 2018 16:47:39 -0400 Subject: Adding support for CUDA 9.1 --- Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Makefile b/Makefile index e83de9a..de6264c 100644 --- a/Makefile +++ b/Makefile @@ -161,6 +161,8 @@ $(SIM_LIB_DIR)/libcudart.so: makedirs $(LIBS) cudalib if [ ! -f $(SIM_LIB_DIR)/libcudart.so.6.5 ]; then ln -s libcudart.so $(SIM_LIB_DIR)/libcudart.so.6.5; fi if [ ! -f $(SIM_LIB_DIR)/libcudart.so.7.5 ]; then ln -s libcudart.so $(SIM_LIB_DIR)/libcudart.so.7.5; fi if [ ! -f $(SIM_LIB_DIR)/libcudart.so.8.0 ]; then ln -s libcudart.so $(SIM_LIB_DIR)/libcudart.so.8.0; fi + if [ ! -f $(SIM_LIB_DIR)/libcudart.so.9.0 ]; then ln -s libcudart.so $(SIM_LIB_DIR)/libcudart.so.9.0; fi + if [ ! -f $(SIM_LIB_DIR)/libcudart.so.9.1 ]; then ln -s libcudart.so $(SIM_LIB_DIR)/libcudart.so.9.1; fi $(SIM_LIB_DIR)/libcudart.dylib: makedirs $(LIBS) cudalib g++ -dynamiclib -Wl,-headerpad_max_install_names,-undefined,dynamic_lookup,-compatibility_version,1.1,-current_version,1.1\ -- cgit v1.3 From 6dfb3ba656b09acafdb274d7ab04fb081ca06e57 Mon Sep 17 00:00:00 2001 From: Mahmoud Date: Wed, 8 Nov 2017 20:13:28 -0500 Subject: Fixing the break limit bug --- src/gpgpusim_entrypoint.cc | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/src/gpgpusim_entrypoint.cc b/src/gpgpusim_entrypoint.cc index 04845e7..ad4587a 100644 --- a/src/gpgpusim_entrypoint.cc +++ b/src/gpgpusim_entrypoint.cc @@ -91,6 +91,7 @@ void *gpgpu_sim_thread_sequential(void*) pthread_mutex_t g_sim_lock = PTHREAD_MUTEX_INITIALIZER; bool g_sim_active = false; bool g_sim_done = true; +bool break_limit = false; void *gpgpu_sim_thread_concurrent(void*) { @@ -144,11 +145,13 @@ void *gpgpu_sim_thread_concurrent(void*) if(g_the_gpu->cycle_insn_cta_max_hit()){ g_stream_manager->stop_all_running_kernels(); g_sim_done = true; + break_limit = true; } } active=g_the_gpu->active() || !g_stream_manager->empty_protected(); - } while( active ); + + } while( active && !g_sim_done); if(g_debug_execution >= 3) { printf("GPGPU-Sim: ** STOP simulation thread (no work) **\n"); fflush(stdout); @@ -166,6 +169,11 @@ void *gpgpu_sim_thread_concurrent(void*) printf("GPGPU-Sim: *** simulation thread exiting ***\n"); fflush(stdout); } + if(break_limit) { + printf("GPGPU-Sim: ** break due to reaching the maximum cycles (or instructions) **\n"); + exit(1); + } + sem_post(&g_sim_signal_exit); return NULL; } @@ -179,7 +187,7 @@ void synchronize() bool done = false; do { pthread_mutex_lock(&g_sim_lock); - done = g_stream_manager->empty() && !g_sim_active; + done = ( g_stream_manager->empty() && !g_sim_active ) || g_sim_done; pthread_mutex_unlock(&g_sim_lock); } while (!done); printf("GPGPU-Sim: detected inactive GPU simulation thread\n"); -- cgit v1.3