From 5b9e91d9b2b5d017a196eb4e02cc7215ec48f692 Mon Sep 17 00:00:00 2001 From: Mahmoud Date: Thu, 14 Sep 2017 20:19:49 -0400 Subject: Adding Pascal config files --- configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt (limited to 'configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt') diff --git a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt new file mode 100644 index 0000000..602daee --- /dev/null +++ b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 52; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + -- cgit v1.3 From 161f9cefeaf216f48f93e1192c817997cf875cac Mon Sep 17 00:00:00 2001 From: Mahmoud Date: Thu, 26 Oct 2017 11:19:52 -0400 Subject: Changing the Titan X config file to use the last modifications --- configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt | 4 +- configs/Pascal-P102-GDDR5X/gpgpusim.config | 46 +++++++++++++--------- src/gpgpu-sim/gpu-sim.cc | 3 ++ src/gpgpu-sim/gpu-sim.h | 1 - 4 files changed, 32 insertions(+), 22 deletions(-) (limited to 'configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt') diff --git a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt index 602daee..58e596d 100644 --- a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt +++ b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt @@ -1,6 +1,6 @@ //21*1 fly with 32 flits per packet under gpgpusim injection mode use_map = 0; -flit_size = 32; +flit_size = 40; // currently we do not use this, see subnets below network_count = 2; @@ -17,7 +17,7 @@ routing_function = dest_tag; // Flow control num_vcs = 1; -vc_buf_size = 8; +vc_buf_size = 32; wait_for_tail_credit = 0; diff --git a/configs/Pascal-P102-GDDR5X/gpgpusim.config b/configs/Pascal-P102-GDDR5X/gpgpusim.config index 8b02680..36d13af 100644 --- a/configs/Pascal-P102-GDDR5X/gpgpusim.config +++ b/configs/Pascal-P102-GDDR5X/gpgpusim.config @@ -12,8 +12,9 @@ -gpgpu_ptx_save_converted_ptxplus 0 # high level architecture configuration +# P102 has two semi-indp scheds per core, and two cores per cluster -gpgpu_n_clusters 28 --gpgpu_n_cores_per_cluster 1 +-gpgpu_n_cores_per_cluster 2 -gpgpu_n_mem 12 -gpgpu_n_sub_partition_per_mchannel 2 @@ -24,20 +25,20 @@ -gpgpu_clock_domains 1417.0:2834.0:1417.0:2500.0 # shader core pipeline config --gpgpu_shader_registers 65536 +-gpgpu_shader_registers 32768 -# This implies a maximum of 64 warps/SM --gpgpu_shader_core_pipeline 2048:32 --gpgpu_shader_cta 32 +# This implies a maximum of 32 warps/SM +-gpgpu_shader_core_pipeline 1024:32 +-gpgpu_shader_cta 16 -gpgpu_simd_model 1 # Pipeline widths and number of FUs # ID_OC_SP,ID_OC_DP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_SFU,OC_EX_MEM,EX_WB ## Pascal GP102 has 4 SP SIMD units and 4 SFU units ## we need to scale the number of pipeline registers to be equal to the number of SP units --gpgpu_pipeline_widths 4,1,4,1,4,1,4,1,9 --gpgpu_num_sp_units 4 --gpgpu_num_sfu_units 4 +-gpgpu_pipeline_widths 2,1,2,1,2,1,2,1,5 +-gpgpu_num_sp_units 2 +-gpgpu_num_sfu_units 2 -gpgpu_num_dp_units 1 @@ -51,7 +52,6 @@ -ptx_opcode_initiation_fp 1,2,1,1,4 -ptx_opcode_latency_dp 8,19,8,8,330 -ptx_opcode_initiation_dp 8,8,8,8,130 --ptx_opcode_latency_sfu 8 -ptx_opcode_initiation_sfu 4 # ::,::::,::,:** @@ -60,13 +60,16 @@ # Pascal GP102 has 96KB Shared memory # Pascal GP102 has 64KB L1 cache # The defulat is to disable the L1 cache, unless cache modifieres is used --gpgpu_cache:dl1 64:128:6,L:L:m:N:H,S:128:8,8 --gpgpu_shmem_size 98304 +-gpgpu_cache:dl1 S:64:128:6,L:L:m:N:H,A:128:8,8 +-gpgpu_shmem_size 49152 -gmem_skip_L1D 1 +-icnt_flit_size 40 +-gpgpu_n_cluster_ejection_buffer_size 32 # 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 3MB L2 cache --gpgpu_cache:dl2 S:64:128:16,L:B:m:W:L,A:128:4,4:0,32 +-gpgpu_cache:dl2 S:64:128:16,L:B:m:F:L,A:256:4,4:0,32 -gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 32:32:32:32 # 4 KB Inst. -gpgpu_cache:il1 N:8:128:4,L:R:f:N:L,S:2:48,4 @@ -76,15 +79,14 @@ -gpgpu_const_cache:l1 N:128:64:2,L:R:f:N:L,S:2:64,4 # enable operand collector -## larger operand collectors and reg_banks are needed for the 4 warp schedulers and 4 SIMD units -gpgpu_operand_collector_num_units_sp 12 -gpgpu_operand_collector_num_units_sfu 6 -gpgpu_operand_collector_num_units_mem 8 -gpgpu_operand_collector_num_units_dp 6 --gpgpu_operand_collector_num_in_ports_sp 4 --gpgpu_operand_collector_num_out_ports_sp 4 --gpgpu_operand_collector_num_in_ports_sfu 4 --gpgpu_operand_collector_num_out_ports_sfu 4 +-gpgpu_operand_collector_num_in_ports_sp 2 +-gpgpu_operand_collector_num_out_ports_sp 2 +-gpgpu_operand_collector_num_in_ports_sfu 2 +-gpgpu_operand_collector_num_out_ports_sfu 2 -gpgpu_operand_collector_num_in_ports_mem 1 -gpgpu_operand_collector_num_out_ports_mem 1 -gpgpu_operand_collector_num_in_ports_dp 1 @@ -119,7 +121,7 @@ # the minimum DRAM latency (100 core cycles). I.e. # Total buffer space required = 100 x 924MHz / 700MHz = 132 -gpgpu_frfcfs_dram_sched_queue_size 64 --gpgpu_dram_return_queue_size 116 +-gpgpu_dram_return_queue_size 192 # for NVIDIA TITAN X, bus width is 384bits (12 DRAM chips x 32 bits) # 12 memory paritions, 4 bytes (1 DRAM chip) per memory partition @@ -136,8 +138,14 @@ -gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" +-dram_bnk_indexing_policy 0 +-dram_bnkgrp_indexing_policy 1 + +#-Seperate_Write_Queue_Enable 1 +#-Write_Queue_Size 32:28:16 + # Pascal 102 has four schedulers per core --gpgpu_num_sched_per_core 4 +-gpgpu_num_sched_per_core 2 # Two Level Scheduler with active and pending pools #-gpgpu_scheduler two_level_active:6:0:1 # Loose round robbin scheduler diff --git a/src/gpgpu-sim/gpu-sim.cc b/src/gpgpu-sim/gpu-sim.cc index 7838875..6179d46 100644 --- a/src/gpgpu-sim/gpu-sim.cc +++ b/src/gpgpu-sim/gpu-sim.cc @@ -207,6 +207,9 @@ void memory_config::reg_options(class OptionParser * opp) option_parser_register(opp, "-Write_Queue_Size", OPT_CSTR, &write_queue_size_opt, "Write_Queue_Size", "32:28:16"); + option_parser_register(opp, "-icnt_flit_size", OPT_UINT32, &icnt_flit_size, + "icnt_flit_size", + "32"); m_address_mapping.addrdec_setoption(opp); } diff --git a/src/gpgpu-sim/gpu-sim.h b/src/gpgpu-sim/gpu-sim.h index 197350b..52c4643 100644 --- a/src/gpgpu-sim/gpu-sim.h +++ b/src/gpgpu-sim/gpu-sim.h @@ -213,7 +213,6 @@ struct memory_config { m_L2_config.init(&m_address_mapping); m_valid = true; - icnt_flit_size = 32; // Default 32 sscanf(write_queue_size_opt,"%d:%d:%d", &gpgpu_frfcfs_dram_write_queue_size,&write_high_watermark,&write_low_watermark); -- cgit v1.3 From 0b1a646c0ddf5d4db64a2b6fe9dfa30789cf1cd4 Mon Sep 17 00:00:00 2001 From: Mahmoud Date: Mon, 30 Oct 2017 20:23:51 -0400 Subject: adding new stats and change the PascalP100-HBM config --- configs/Pascal-P100-HBM/config_fermi_islip.icnt | 9 +++++--- configs/Pascal-P100-HBM/gpgpusim.config | 25 ++++++++++++---------- configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt | 3 +++ src/gpgpu-sim/dram.cc | 13 +++++++---- src/gpgpu-sim/dram.h | 4 ++++ src/gpgpu-sim/dram_sched.cc | 21 +++++++++++++----- src/gpgpu-sim/gpu-sim.cc | 4 +++- src/gpgpu-sim/gpu-sim.h | 8 +++++++ 8 files changed, 63 insertions(+), 24 deletions(-) (limited to 'configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt') diff --git a/configs/Pascal-P100-HBM/config_fermi_islip.icnt b/configs/Pascal-P100-HBM/config_fermi_islip.icnt index a788090..0a73c81 100644 --- a/configs/Pascal-P100-HBM/config_fermi_islip.icnt +++ b/configs/Pascal-P100-HBM/config_fermi_islip.icnt @@ -1,13 +1,13 @@ //21*1 fly with 32 flits per packet under gpgpusim injection mode use_map = 0; -flit_size = 32; +flit_size = 40; // currently we do not use this, see subnets below network_count = 2; // Topology topology = fly; -k = 62; +k = 60; n = 1; // Routing @@ -17,7 +17,10 @@ routing_function = dest_tag; // Flow control num_vcs = 1; -vc_buf_size = 8; +vc_buf_size = 64; +input_buffer_size = 64; +ejection_buffer_size = 64; +boundary_buffer_size = 64; wait_for_tail_credit = 0; diff --git a/configs/Pascal-P100-HBM/gpgpusim.config b/configs/Pascal-P100-HBM/gpgpusim.config index 5b038de..1029194 100644 --- a/configs/Pascal-P100-HBM/gpgpusim.config +++ b/configs/Pascal-P100-HBM/gpgpusim.config @@ -54,13 +54,17 @@ # ** Optional parameter - Required when mshr_type==Texture Fifo # Note: Hashing set index function (H) only applies to a set size of 32 or 64. # Pascal GP100 has 64KB Shared memory --gpgpu_cache:dl1 N:64:128:6,L:L:m:N:H,S:128:8,8 +-gpgpu_cache:dl1 S:64:128:6,L:L:m:N:H,A:128:8,32:0,32 -gpgpu_shmem_size 65536 --gmem_skip_L1D 0 +-gmem_skip_L1D 1 +-icnt_flit_size 40 +-gpgpu_n_cluster_ejection_buffer_size 32 -# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 4MB L2 cache --gpgpu_cache:dl2 S:64:128:16,L:B:m:W:L,A:128:4,4:0,32 +# 32 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 4MB L2 cache +-gpgpu_cache:dl2 S:64:128:16,L:B:m:W:L,A:256:4,32:0,32 -gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 64:64:64:64 +#-gpgpu_flush_l2_cache 1 # 4 KB Inst. -gpgpu_cache:il1 N:8:128:4,L:R:f:N:L,S:2:48,4 @@ -89,8 +93,7 @@ -gpgpu_shmem_num_banks 32 -gpgpu_shmem_limited_broadcast 0 -gpgpu_shmem_warp_parts 1 -# Use Fermi Coalscer arhitetecture for now! Need to be canged to pascal Coalscer --gpgpu_coalesce_arch 20 +-gpgpu_coalesce_arch 60 ## In Pascal, a warp scheduler can issue 2 insts per cycle using 2 diff execution units -gpgpu_max_insn_issue_per_warp 2 @@ -123,10 +126,6 @@ -gpgpu_mem_address_mask 1 -gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBBCCC.CCCSSSSS -# GDDR5 timing -#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=6:RCD=12:RAS=28:RP=12:RC=40: -# CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" - # HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) # Timing for 1 GHZ # tRRDl and tWTR are missing, need to be added @@ -140,8 +139,12 @@ # HBM has dual bus interface, in which it can issue two col and row commands at a time -dual_bus_interface 1 # select lower bits for bnkgrp to increase bnkgrp parallelism +-dram_bnk_indexing_policy 0 -dram_bnkgrp_indexing_policy 1 +#-Seperate_Write_Queue_Enable 1 +#-Write_Queue_Size 64:56:32 + # Pascal has two schedulers per core -gpgpu_num_sched_per_core 2 # Two Level Scheduler with active and pending pools @@ -158,7 +161,7 @@ -visualizer_enabled 0 # power model configs, disable it untill we create a real energy model for Pascal 100 --power_simulation_enabled 1 +-power_simulation_enabled 0 -gpuwattch_xml_file gpuwattch_gtx480.xml # tracing functionality diff --git a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt index 58e596d..94b2378 100644 --- a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt +++ b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt @@ -18,6 +18,9 @@ routing_function = dest_tag; num_vcs = 1; vc_buf_size = 32; +input_buffer_size = 32; +ejection_buffer_size = 32; +boundary_buffer_size = 32; wait_for_tail_credit = 0; diff --git a/src/gpgpu-sim/dram.cc b/src/gpgpu-sim/dram.cc index de37f64..a57508c 100644 --- a/src/gpgpu-sim/dram.cc +++ b/src/gpgpu-sim/dram.cc @@ -52,6 +52,10 @@ dram_t::dram_t( unsigned int partition_id, const struct memory_config *config, m //rowblp access_num=0; hits_num=0; + read_num=0; + write_num=0; + hits_read_num=0; + hits_write_num=0; banks_1time=0; banks_acess_total=0; banks_acess_total_after=0; @@ -718,6 +722,8 @@ void dram_t::print( FILE* simFile) const fprintf(simFile, "\n------------------------------------------------------------------------\n"); printf("\nRow_Buffer_Locality = %.6f", (float)hits_num / access_num); + printf("\nRow_Buffer_Locality_read = %.6f", (float)hits_read_num / read_num); + printf("\nRow_Buffer_Locality_write = %.6f", (float)hits_write_num / write_num); printf("\nBank_Level_Parallism = %.6f", (float)banks_1time / banks_acess_total); printf("\nBank_Level_Parallism_Col = %.6f", (float)banks_time_rw / banks_access_rw_total); printf("\nBank_Level_Parallism_Ready = %.6f", (float)banks_time_ready /banks_access_ready_total); @@ -735,7 +741,7 @@ void dram_t::print( FILE* simFile) const printf("RCDWRc_limit = %d \n", RCDWRc_limit); printf("WTRc_limit = %d \n", WTRc_limit); printf("RTWc_limit = %d \n", RTWc_limit); - printf("CCDLc_limit %d \n", CCDLc_limit); + printf("CCDLc_limit = %d \n", CCDLc_limit); printf("rwq = %d \n", rwq_limit); printf("CCDLc_limit_alone = %d \n", CCDLc_limit_alone); printf("WTRc_limit_alone = %d \n", WTRc_limit_alone); @@ -751,15 +757,14 @@ void dram_t::print( FILE* simFile) const printf("n_pre = %d \n", n_pre); printf("n_ref = %d \n", n_ref); printf("n_req = %d \n", n_req ); - printf("n_req4 = %d \n", n_req*4 ); printf("total_req = %d \n\n", n_rd+n_wr+n_rd_L2_A+n_wr_WB); printf("issued_total_row = %lu \n", issued_total_row); printf("issued_total_col = %lu \n", issued_total_col); printf("Row_Bus_Util = %.6f \n", (float)issued_total_row / n_cmd); printf("CoL_Bus_Util = %.6f \n", (float)issued_total_col / n_cmd); - printf("Either_Row_CoL_Bus_Util %.6f \n", (float)issued_total / n_cmd); - printf("Issued_on_Two_Bus_Simul_Util %.6f \n", (float)issued_two /n_cmd); + printf("Either_Row_CoL_Bus_Util = %.6f \n", (float)issued_total / n_cmd); + printf("Issued_on_Two_Bus_Simul_Util = %.6f \n", (float)issued_two /n_cmd); printf("issued_two_Eff = %.6f \n", (float)issued_two /issued_total); printf("queue_avg = %.6f \n\n", (float)ave_mrqs/n_cmd ); diff --git a/src/gpgpu-sim/dram.h b/src/gpgpu-sim/dram.h index 29731a7..0d4c0e7 100644 --- a/src/gpgpu-sim/dram.h +++ b/src/gpgpu-sim/dram.h @@ -198,7 +198,11 @@ private: //row locality, BLP and other statistics unsigned long access_num; + unsigned long read_num; + unsigned long write_num; unsigned long long hits_num; + unsigned long long hits_read_num; + unsigned long long hits_write_num; unsigned long long banks_1time; unsigned long long banks_acess_total; unsigned long long banks_acess_total_after; diff --git a/src/gpgpu-sim/dram_sched.cc b/src/gpgpu-sim/dram_sched.cc index ac4c827..f754d36 100644 --- a/src/gpgpu-sim/dram_sched.cc +++ b/src/gpgpu-sim/dram_sched.cc @@ -142,14 +142,25 @@ dram_req_t *frfcfs_scheduler::schedule( unsigned bank, unsigned curr_row ) rowhit = true; } } - //rowblp - m_dram->access_num++; - if(rowhit) - m_dram->hits_num++; - std::list::iterator next = m_current_last_row[bank]->back(); dram_req_t *req = (*next); + //rowblp stats + m_dram->access_num++; + bool is_write = req->data->is_write(); + if(is_write) + m_dram->write_num++; + else + m_dram->read_num++; + + if(rowhit) { + m_dram->hits_num++; + if(is_write) + m_dram->hits_write_num++; + else + m_dram->hits_read_num++; + } + m_stats->concurrent_row_access[m_dram->id][bank]++; m_stats->row_access[m_dram->id][bank]++; m_current_last_row[bank]->pop_back(); diff --git a/src/gpgpu-sim/gpu-sim.cc b/src/gpgpu-sim/gpu-sim.cc index 0e06c5c..11ac5df 100644 --- a/src/gpgpu-sim/gpu-sim.cc +++ b/src/gpgpu-sim/gpu-sim.cc @@ -207,6 +207,9 @@ void memory_config::reg_options(class OptionParser * opp) option_parser_register(opp, "-Write_Queue_Size", OPT_CSTR, &write_queue_size_opt, "Write_Queue_Size", "32:28:16"); + option_parser_register(opp, "-Elimnate_rw_turnaround", OPT_BOOL, &elimnate_rw_turnaround, + "elimnate_rw_turnaround i.e set tWTR and tRTW = 0", + "0"); option_parser_register(opp, "-icnt_flit_size", OPT_UINT32, &icnt_flit_size, "icnt_flit_size", "32"); @@ -435,7 +438,6 @@ void gpgpu_sim_config::reg_options(option_parser_t opp) option_parser_register(opp, "-gpgpu_flush_l2_cache", OPT_BOOL, &gpgpu_flush_l2_cache, "Flush L2 cache at the end of each kernel call", "0"); - option_parser_register(opp, "-gpgpu_deadlock_detect", OPT_BOOL, &gpu_deadlock_detect, "Stop the simulation at deadlock (1=on (default), 0=off)", "1"); diff --git a/src/gpgpu-sim/gpu-sim.h b/src/gpgpu-sim/gpu-sim.h index 043fcee..c04648c 100644 --- a/src/gpgpu-sim/gpu-sim.h +++ b/src/gpgpu-sim/gpu-sim.h @@ -198,8 +198,14 @@ struct memory_config { bk_tag_length = i-1; assert(nbkgrp>0 && "Number of bank groups cannot be zero"); tRCDWR = tRCD-(WL+1); + if(elimnate_rw_turnaround) + { + tRTW = 0; + tWTR = 0; + } else { tRTW = (CL+(BL/data_command_freq_ratio)+2-WL); tWTR = (WL+(BL/data_command_freq_ratio)+tCDLR); + } tWTP = (WL+(BL/data_command_freq_ratio)+tWR); dram_atom_size = BL * busW * gpu_n_mem_per_ctrlr; // burst length x bus width x # chips per partition @@ -266,6 +272,8 @@ struct memory_config { unsigned nbk; + bool elimnate_rw_turnaround; + unsigned data_command_freq_ratio; // frequency ratio between DRAM data bus and command bus (2 for GDDR3, 4 for GDDR5) unsigned dram_atom_size; // number of bytes transferred per read or write command -- cgit v1.3 From 3fe52ab24a75493ad201ef82837dced36272b8f5 Mon Sep 17 00:00:00 2001 From: Mahmoud Abdallah Date: Sat, 18 Nov 2017 23:56:06 -0500 Subject: improving P102 accuracy --- configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt | 8 ++++---- configs/Pascal-P102-GDDR5X/gpgpusim.config | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt') diff --git a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt index 94b2378..714d933 100644 --- a/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt +++ b/configs/Pascal-P102-GDDR5X/config_fermi_islip.icnt @@ -17,10 +17,10 @@ routing_function = dest_tag; // Flow control num_vcs = 1; -vc_buf_size = 32; -input_buffer_size = 32; -ejection_buffer_size = 32; -boundary_buffer_size = 32; +vc_buf_size = 64; +input_buffer_size = 256; +ejection_buffer_size = 64; +boundary_buffer_size = 64; wait_for_tail_credit = 0; diff --git a/configs/Pascal-P102-GDDR5X/gpgpusim.config b/configs/Pascal-P102-GDDR5X/gpgpusim.config index 257560e..cb69767 100644 --- a/configs/Pascal-P102-GDDR5X/gpgpusim.config +++ b/configs/Pascal-P102-GDDR5X/gpgpusim.config @@ -61,7 +61,7 @@ # Pascal GP102 has 96KB Shared memory # Pascal GP102 has 24KB L1 cache # The defulat is to disable the L1 cache, unless cache modifieres is used --gpgpu_cache:dl1 N:32:128:6,L:L:m:N:H,S:128:8,16 +-gpgpu_cache:dl1 S:32:128:6,L:L:f:N:H,A:256:8,16:0,32 -gpgpu_shmem_size 49152 -gmem_skip_L1D 1 -icnt_flit_size 40 @@ -71,7 +71,7 @@ -gpgpu_cache:dl2 S:64:128:16,L:B:m:F:L,A:128:4,16:0,32 -gpgpu_cache:dl2_texture_only 0 -gpgpu_dram_partition_queues 32:32:32:32 -#-gpgpu_flush_l2_cache 1 +-perf_sim_memcpy 1 # 4 KB Inst. -gpgpu_cache:il1 N:8:128:4,L:R:f:N:L,S:2:48,4 @@ -113,7 +113,7 @@ -inter_config_file config_fermi_islip.icnt # memory partition latency config --rop_latency 0 +-rop_latency 100 -dram_latency 100 # dram model config @@ -138,8 +138,8 @@ # Use the same GDDR5 timing from hynix H5GQ1H24AFR # disable bank groups for now, set nbkgrp to 1 and tCCDL and tRTPL to 0 --gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: - CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=8:RCD=16:RAS=37:RP=16:RC=52: + CL=16:WL=6:CDLR=7:WR=16:nbkgrp=4:CCDL=4:RTPL=3" -dram_bnk_indexing_policy 0 -dram_bnkgrp_indexing_policy 1 -- cgit v1.3