From eae030c9d1d607d1c14e4ade99cb5caea6403efd Mon Sep 17 00:00:00 2001 From: aamir Date: Sat, 3 Nov 2018 17:03:58 -0700 Subject: merged with memory subsytem. Regression is passing but tensorcore kernel is stuck in deadlock --- .../deprecated-cfgs/GTX480/config_fermi_islip.icnt | 70 +++ configs/deprecated-cfgs/GTX480/gpgpusim.config | 134 +++++ .../deprecated-cfgs/GTX480/gpuwattch_gtx480.xml | 538 ++++++++++++++++++++ .../GeForceGTX750Ti/config_fermi_islip.icnt | 70 +++ .../GeForceGTX750Ti/gpgpusim.config | 131 +++++ .../GeForceGTX750Ti/gpuwattch_gtx750Ti.xml | 539 +++++++++++++++++++++ .../deprecated-cfgs/QuadroFX5600/gpgpusim.config | 99 ++++ .../QuadroFX5600/gpuwattch_quadrofx5600.xml | 538 ++++++++++++++++++++ .../QuadroFX5600/icnt_config_islip.icnt | 70 +++ .../QuadroFX5800/config_quadro_islip.icnt | 69 +++ .../deprecated-cfgs/QuadroFX5800/gpgpusim.config | 88 ++++ .../SM6_GTX1080/config_fermi_islip.icnt | 70 +++ .../deprecated-cfgs/SM6_GTX1080/gpgpusim.config | 150 ++++++ .../SM6_GTX1080/gpuwattch_gtx1080Ti.xml | 538 ++++++++++++++++++++ .../SM6_P100/config_fermi_islip.icnt | 70 +++ configs/deprecated-cfgs/SM6_P100/gpgpusim.config | 156 ++++++ .../deprecated-cfgs/SM6_P100/gpuwattch_gtx480.xml | 538 ++++++++++++++++++++ .../SM6_TITANX/config_fermi_islip.icnt | 70 +++ configs/deprecated-cfgs/SM6_TITANX/gpgpusim.config | 157 ++++++ .../SM6_TITANX/gpuwattch_gtx480.xml | 538 ++++++++++++++++++++ .../SM7_TITANV/config_fermi_islip.icnt | 70 +++ configs/deprecated-cfgs/SM7_TITANV/gpgpusim.config | 165 +++++++ .../TeslaC2050/config_fermi_islip.icnt | 70 +++ configs/deprecated-cfgs/TeslaC2050/gpgpusim.config | 133 +++++ 24 files changed, 5071 insertions(+) create mode 100644 configs/deprecated-cfgs/GTX480/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/GTX480/gpgpusim.config create mode 100755 configs/deprecated-cfgs/GTX480/gpuwattch_gtx480.xml create mode 100644 configs/deprecated-cfgs/GeForceGTX750Ti/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/GeForceGTX750Ti/gpgpusim.config create mode 100755 configs/deprecated-cfgs/GeForceGTX750Ti/gpuwattch_gtx750Ti.xml create mode 100644 configs/deprecated-cfgs/QuadroFX5600/gpgpusim.config create mode 100644 configs/deprecated-cfgs/QuadroFX5600/gpuwattch_quadrofx5600.xml create mode 100644 configs/deprecated-cfgs/QuadroFX5600/icnt_config_islip.icnt create mode 100644 configs/deprecated-cfgs/QuadroFX5800/config_quadro_islip.icnt create mode 100644 configs/deprecated-cfgs/QuadroFX5800/gpgpusim.config create mode 100644 configs/deprecated-cfgs/SM6_GTX1080/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/SM6_GTX1080/gpgpusim.config create mode 100755 configs/deprecated-cfgs/SM6_GTX1080/gpuwattch_gtx1080Ti.xml create mode 100644 configs/deprecated-cfgs/SM6_P100/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/SM6_P100/gpgpusim.config create mode 100755 configs/deprecated-cfgs/SM6_P100/gpuwattch_gtx480.xml create mode 100644 configs/deprecated-cfgs/SM6_TITANX/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/SM6_TITANX/gpgpusim.config create mode 100755 configs/deprecated-cfgs/SM6_TITANX/gpuwattch_gtx480.xml create mode 100644 configs/deprecated-cfgs/SM7_TITANV/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/SM7_TITANV/gpgpusim.config create mode 100644 configs/deprecated-cfgs/TeslaC2050/config_fermi_islip.icnt create mode 100644 configs/deprecated-cfgs/TeslaC2050/gpgpusim.config (limited to 'configs/deprecated-cfgs') diff --git a/configs/deprecated-cfgs/GTX480/config_fermi_islip.icnt b/configs/deprecated-cfgs/GTX480/config_fermi_islip.icnt new file mode 100644 index 0000000..7820e4e --- /dev/null +++ b/configs/deprecated-cfgs/GTX480/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 27; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/GTX480/gpgpusim.config b/configs/deprecated-cfgs/GTX480/gpgpusim.config new file mode 100644 index 0000000..ee90c12 --- /dev/null +++ b/configs/deprecated-cfgs/GTX480/gpgpusim.config @@ -0,0 +1,134 @@ +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 20 + + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 15 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 6 +-gpgpu_n_sub_partition_per_mchannel 2 + +# Fermi clock domains +#-gpgpu_clock_domains ::: +# In Fermi, each pipeline has 16 execution units, so the Core clock needs to be divided +# by 2. (GPGPU-Sim simulates a warp (32 threads) in a single cycle). 1400/2 = 700 +-gpgpu_clock_domains 700.0:700.0:700.0:924.0 + +# shader core pipeline config +-gpgpu_shader_registers 32768 +-gpgpu_occupancy_sm_number 20 + +# This implies a maximum of 48 warps/SM +-gpgpu_shader_core_pipeline 1536:32 +-gpgpu_shader_cta 8 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +-gpgpu_pipeline_widths 2,1,1,2,1,1,2 +-gpgpu_num_sp_units 2 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,2,2,1,8 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 8,16,8,8,130 + + +# In Fermi, the cache and shared memory can be configured to 16kb:48kb(default) or 48kb:16kb +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +-gpgpu_cache:dl1 32:128:4,L:L:m:N:H,A:32:8,8 +-gpgpu_shmem_size 49152 + +# The alternative configuration for fermi in case cudaFuncCachePreferL1 is selected +#-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:32:8,8 +#-gpgpu_shmem_size 16384 + +# 64 sets, each 128 bytes 8-way for each memory sub partition. This gives 786KB L2 cache +-gpgpu_cache:dl2 64:128:8,L:B:m:W:L,A:32:4,4:0,32 +-gpgpu_cache:dl2_texture_only 0 + +-gpgpu_cache:il1 4:128:4,L:R:f:N:L,A:2:32,4 +-gpgpu_tex_cache:l1 4:128:24,L:R:m:N:L,F:128:4,128:2 +-gpgpu_const_cache:l1 64:64:2,L:R:f:N:L,A:2:32,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 6 +-gpgpu_operand_collector_num_units_sfu 8 +-gpgpu_operand_collector_num_in_ports_sp 2 +-gpgpu_operand_collector_num_out_ports_sp 2 +-gpgpu_num_reg_banks 16 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +-gpgpu_max_insn_issue_per_warp 1 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 16 +-gpgpu_dram_return_queue_size 116 + +# for Fermi, bus width is 384bits, this is 8 bytes (4 bytes at each DRAM chip) per memory partition +-gpgpu_n_mem_per_ctrlr 2 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5 is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.BBBCCCCB.CCSSSSSS + +# GDDR5 timing from hynix H5GQ1H24AFR +# to disable bank groups, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" + +# Fermi has two schedulers per core +-gpgpu_num_sched_per_core 2 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +-power_simulation_enabled 1 +-gpuwattch_xml_file gpuwattch_gtx480.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 diff --git a/configs/deprecated-cfgs/GTX480/gpuwattch_gtx480.xml b/configs/deprecated-cfgs/GTX480/gpuwattch_gtx480.xml new file mode 100755 index 0000000..304e0fd --- /dev/null +++ b/configs/deprecated-cfgs/GTX480/gpuwattch_gtx480.xml @@ -0,0 +1,538 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/configs/deprecated-cfgs/GeForceGTX750Ti/config_fermi_islip.icnt b/configs/deprecated-cfgs/GeForceGTX750Ti/config_fermi_islip.icnt new file mode 100644 index 0000000..069ca02 --- /dev/null +++ b/configs/deprecated-cfgs/GeForceGTX750Ti/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 7; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/GeForceGTX750Ti/gpgpusim.config b/configs/deprecated-cfgs/GeForceGTX750Ti/gpgpusim.config new file mode 100644 index 0000000..c675aab --- /dev/null +++ b/configs/deprecated-cfgs/GeForceGTX750Ti/gpgpusim.config @@ -0,0 +1,131 @@ +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 52 + + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 5 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 2 +-gpgpu_n_sub_partition_per_mchannel 1 + +# Maxwell clock domains +#-gpgpu_clock_domains ::: +# In Maxwell, each pipeline has 32 execution units, so the Core clock is just the reported number. +-gpgpu_clock_domains 1137.0:1137.0:1137.0:2700.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 +-gpgpu_occupancy_sm_number 52 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 8 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +-gpgpu_pipeline_widths 2,1,1,2,1,1,2 +-gpgpu_num_sp_units 8 +-gpgpu_num_sfu_units 32 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +-ptx_opcode_latency_int 6,12,13,13,210 +-ptx_opcode_initiation_int 1,1,1,1,4 +-ptx_opcode_latency_fp 6,12,6,6,374 +-ptx_opcode_initiation_fp 1,1,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 8,16,8,8,130 + +-gpgpu_cache:dl1 32:128:4,L:L:m:N:H,A:32:8,8 +-gmem_skip_L1D 1 +-gpgpu_shmem_size 65536 + +# The alternative configuration for fermi in case cudaFuncCachePreferL1 is selected +#-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:32:8,8 +#-gpgpu_shmem_size 16384 + +# 1024 sets, each 128 bytes 8-way for each memory sub partition. This gives 2MB L2 cache +-gpgpu_cache:dl2 1024:128:8,L:B:m:W:L,A:32:4,4:0,32 +-gpgpu_cache:dl2_texture_only 0 + +-gpgpu_cache:il1 4:128:4,L:R:f:N:L,A:2:32,4 +-gpgpu_tex_cache:l1 16:128:32,L:R:m:N:L,F:128:4,128:2 +-gpgpu_const_cache:l1 64:64:2,L:R:f:N:L,A:2:32,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 6 +-gpgpu_operand_collector_num_units_sfu 8 +-gpgpu_operand_collector_num_in_ports_sp 2 +-gpgpu_operand_collector_num_out_ports_sp 2 +-gpgpu_num_reg_banks 16 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +-gpgpu_max_insn_issue_per_warp 2 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 150 +-dram_latency 130 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 16 +-gpgpu_dram_return_queue_size 300 + +# for Maxwell, bus width is 128bits, this is 64 bytes (32 bytes at each DRAM chip) per memory partition +-gpgpu_n_mem_per_ctrlr 2 +-gpgpu_dram_buswidth 32 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5 is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.BBBCCCCB.CCSSSSSS + +# GDDR5 timing from hynix H5GQ1H24AFR +# to disable bank groups, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" + +# Maxwell has four schedulers per core +-gpgpu_num_sched_per_core 4 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +# power modeling is currently disabled for GTX750Ti. The gpuwattch_gtx750ti.xml file present is only a placeholder and has NOT been tested for accuracy. +# proper modeling of Maxwell power is planned, but should be considered completely unsupported at present. +-power_simulation_enabled 0 +-gpuwattch_xml_file gpuwattch_gtx750Ti.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 diff --git a/configs/deprecated-cfgs/GeForceGTX750Ti/gpuwattch_gtx750Ti.xml b/configs/deprecated-cfgs/GeForceGTX750Ti/gpuwattch_gtx750Ti.xml new file mode 100755 index 0000000..e2b2324 --- /dev/null +++ b/configs/deprecated-cfgs/GeForceGTX750Ti/gpuwattch_gtx750Ti.xml @@ -0,0 +1,539 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/configs/deprecated-cfgs/QuadroFX5600/gpgpusim.config b/configs/deprecated-cfgs/QuadroFX5600/gpgpusim.config new file mode 100644 index 0000000..6f836ee --- /dev/null +++ b/configs/deprecated-cfgs/QuadroFX5600/gpgpusim.config @@ -0,0 +1,99 @@ +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 12 + +# high level architecture configuration +-gpgpu_n_clusters 8 +-gpgpu_n_cores_per_cluster 2 +-gpgpu_n_mem 6 +-gpgpu_clock_domains 337.5:600.0:600.0:800.0 + +# shader core pipeline config +-gpgpu_shader_registers 16384 +-gpgpu_occupancy_sm_number 12 + +-gpgpu_occupancy_sm_number 12 +#8192 (registers per block as written by device Query and which used in this option in our other configurations but this break some benchmarks execution! it does not affect performance modeling though) +-gpgpu_shader_core_pipeline 768:32 +-gpgpu_shader_cta 8 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +-gpgpu_pipeline_widths 1,1,1,1,1,1,1 +-gpgpu_num_sp_units 1 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +-ptx_opcode_latency_int 1,1,19,25,145 +-ptx_opcode_initiation_int 1,1,4,4,32 +-ptx_opcode_latency_fp 1,1,1,1,30 +-ptx_opcode_initiation_fp 1,1,1,1,5 +-ptx_opcode_latency_dp 8,8,8,8,335 +-ptx_opcode_initiation_dp 8,8,8,8,130 + +# memory stage behaviour +-gpgpu_cache:il1 4:256:4,L:R:f:N:L,A:2:32,4 +-gpgpu_tex_cache:l1 8:128:5,L:R:m:N:L,F:128:4,128:2 +-gpgpu_const_cache:l1 64:64:2,L:R:f:N:L,A:2:32,4 +-gpgpu_cache:dl2 16:256:8,L:B:m:W:L,A:16:4,4 +-gpgpu_cache:dl2_texture_only 1 + +# TLB parameters +#-gpgpu_cache:tlbl1 1:524288:16:1:L:R:m,A:32:8,8 +#-gpgpu_tlbl2_latency 45 + + +-gpgpu_shmem_warp_parts 2 + +# interconnection +-network_mode 1 +-inter_config_file icnt_config_islip.icnt + +# dram scheduler config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (30 core cycles). I.e. +# Total buffer space required = 30 x 800MHz / 337.5MHz = 71 +-gpgpu_frfcfs_dram_sched_queue_size 16 +-gpgpu_dram_return_queue_size 55 + +# dram model config +-gpgpu_n_mem_per_ctrlr 2 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 4 +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RRBBBCCC.CCCSSSSS +# GDDR3 timing from Samsung K4J52324QH-HC12 @ 800MHz +# {nbk:tCCD:tRRD:tRCD:tRAS:tRP:tRC:CL:WL:tCDLR:tWR:nbkgrp:tCCDL:tRTPL} +-gpgpu_dram_timing_opt nbk=8:CCD=2:RRD=8:RCD=12:RAS=25:RP=10:RC=35:CL=10:WL=7:CDLR=6:WR=11 + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 + + + +# Using cuobjdump to extract ptx/SASS +-gpgpu_ptx_use_cuobjdump 1 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 6 +-gpgpu_operand_collector_num_units_sfu 8 + +-visualizer_enabled 0 +-power_trace_enabled 0 +-power_simulation_enabled 1 +-gpuwattch_xml_file gpuwattch_quadrofx5600.xml + +-steady_power_levels_enabled 1 +-steady_state_definition 8,4 diff --git a/configs/deprecated-cfgs/QuadroFX5600/gpuwattch_quadrofx5600.xml b/configs/deprecated-cfgs/QuadroFX5600/gpuwattch_quadrofx5600.xml new file mode 100644 index 0000000..2c5a6fc --- /dev/null +++ b/configs/deprecated-cfgs/QuadroFX5600/gpuwattch_quadrofx5600.xml @@ -0,0 +1,538 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/configs/deprecated-cfgs/QuadroFX5600/icnt_config_islip.icnt b/configs/deprecated-cfgs/QuadroFX5600/icnt_config_islip.icnt new file mode 100644 index 0000000..de3bcc8 --- /dev/null +++ b/configs/deprecated-cfgs/QuadroFX5600/icnt_config_islip.icnt @@ -0,0 +1,70 @@ +//14*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we donot use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 14; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/QuadroFX5800/config_quadro_islip.icnt b/configs/deprecated-cfgs/QuadroFX5800/config_quadro_islip.icnt new file mode 100644 index 0000000..cfe9cac --- /dev/null +++ b/configs/deprecated-cfgs/QuadroFX5800/config_quadro_islip.icnt @@ -0,0 +1,69 @@ +//18*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we donot use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 18; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/QuadroFX5800/gpgpusim.config b/configs/deprecated-cfgs/QuadroFX5800/gpgpusim.config new file mode 100644 index 0000000..fef1110 --- /dev/null +++ b/configs/deprecated-cfgs/QuadroFX5800/gpgpusim.config @@ -0,0 +1,88 @@ +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 13 + +# high level architecture configuration +-gpgpu_n_clusters 10 +-gpgpu_n_cores_per_cluster 3 +-gpgpu_n_mem 8 +-gpgpu_clock_domains 325.0:650.0:650.0:800.0 + +# shader core pipeline config +-gpgpu_shader_registers 16384 +-gpgpu_occupancy_sm_number 13 + +-gpgpu_shader_core_pipeline 1024:32 +-gpgpu_shader_cta 8 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +-gpgpu_pipeline_widths 1,1,1,1,1,1,1 +-gpgpu_num_sp_units 1 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +-ptx_opcode_latency_int 1,1,19,25,145 +-ptx_opcode_initiation_int 1,1,4,4,32 +-ptx_opcode_latency_fp 1,1,1,1,30 +-ptx_opcode_initiation_fp 1,1,1,1,5 +-ptx_opcode_latency_dp 8,8,8,8,335 +-ptx_opcode_initiation_dp 8,8,8,8,130 + +# memory stage behaviour +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +-gpgpu_cache:il1 4:256:4,L:R:f:N:L,A:2:32,4 +-gpgpu_tex_cache:l1 8:128:5,L:R:m:N:L,F:128:4,128:2 +-gpgpu_const_cache:l1 64:64:2,L:R:f:N:L,A:2:32,4 +-gpgpu_cache:dl2 16:256:8,L:B:m:W:L,A:16:4,4 +-gpgpu_cache:dl2_texture_only 1 + +-gpgpu_shmem_warp_parts 2 + +# interconnection +-network_mode 1 +-inter_config_file config_quadro_islip.icnt + +# dram scheduler config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (30 core cycles). I.e. +# Total buffer space required = 30 x 800MHz / 325MHz = 74 +-gpgpu_frfcfs_dram_sched_queue_size 16 +-gpgpu_dram_return_queue_size 58 + +# dram model config +-gpgpu_n_mem_per_ctrlr 2 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 4 +-dram_data_command_freq_ratio 2 # GDDR3 is DDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RRBBBCCC.CCCSSSSS +# GDDR3 timing from Samsung K4J52324QH-HC12 @ 800MHz +-gpgpu_dram_timing_opt nbk=8:CCD=2:RRD=8:RCD=12:RAS=25:RP=10:RC=35:CL=10:WL=7:CDLR=6:WR=11 + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 6 +-gpgpu_operand_collector_num_units_sfu 8 + +-visualizer_enabled 0 + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 diff --git a/configs/deprecated-cfgs/SM6_GTX1080/config_fermi_islip.icnt b/configs/deprecated-cfgs/SM6_GTX1080/config_fermi_islip.icnt new file mode 100644 index 0000000..2a69ddd --- /dev/null +++ b/configs/deprecated-cfgs/SM6_GTX1080/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 50; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/SM6_GTX1080/gpgpusim.config b/configs/deprecated-cfgs/SM6_GTX1080/gpgpusim.config new file mode 100644 index 0000000..fb044c6 --- /dev/null +++ b/configs/deprecated-cfgs/SM6_GTX1080/gpgpusim.config @@ -0,0 +1,150 @@ +# This config models the Pascal GP102 (GeForceGTX 1080Ti) + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 60 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 28 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 11 +-gpgpu_n_sub_partition_per_mchannel 2 + +# Pascal clock domains +#-gpgpu_clock_domains ::: +# Pascal NVIDIA TITAN X clock domains are adopted from +# https://en.wikipedia.org/wiki/GeForce_10_series +-gpgpu_clock_domains 1481.0:2962.0:1481.0:2750.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 +-gpgpu_occupancy_sm_number 60 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 32 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +## Pascal GP102 has 4 SP SIMD units and 1 SFU unit +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 4,1,1,4,1,1,6 +-gpgpu_num_sp_units 4 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# SFU is 32-width in pascal, then dp units initiation is 1 cycle +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,2,2,2,8 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 1,2,1,1,130 + +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +# Pascal GP102 has 96KB Shared memory +# Pascal GP102 has 64KB L1 cache +# The default is to disable the L1 cache, unless cache modifieres is used +-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:128:8,8 +-gpgpu_shmem_size 98304 +-gmem_skip_L1D 1 + +# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 3MB L2 cache +-gpgpu_cache:dl2 64:128:16,L:B:m:W:L,A:1024:1024,4:0,32 # used to be 128:4 +-gpgpu_cache:dl2_texture_only 0 + +# 4 KB Inst. +-gpgpu_cache:il1 8:128:4,L:R:f:N:L,A:2:48,4 +# 48 KB Tex +-gpgpu_tex_cache:l1 16:128:24,L:R:m:N:L,F:128:4,128:2 +# 12 KB Const +-gpgpu_const_cache:l1 128:64:2,L:R:f:N:L,A:2:64,4 + +# enable operand collector +## larger operand collectors and reg_banks are needed for the 4 warp schedulers and 4 SIMD units +-gpgpu_operand_collector_num_units_sp 20 +-gpgpu_operand_collector_num_units_sfu 4 +-gpgpu_operand_collector_num_units_mem 8 +-gpgpu_operand_collector_num_in_ports_sp 4 +-gpgpu_operand_collector_num_out_ports_sp 4 +-gpgpu_operand_collector_num_in_ports_sfu 1 +-gpgpu_operand_collector_num_out_ports_sfu 1 +-gpgpu_operand_collector_num_in_ports_mem 1 +-gpgpu_operand_collector_num_out_ports_mem 1 +# gpgpu_num_reg_banks should be increased to 32, but it gives an error! +-gpgpu_num_reg_banks 32 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +## In Pascal, a warp scheduler can issue 2 insts per cycle +-gpgpu_max_insn_issue_per_warp 2 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 116 + +# for NVIDIA GeForceGTX 1080Ti, bus width is 352bits (11 DRAM chips x 32 bits) +# 11 memory paritions, 4 bytes (1 DRAM chip) per memory partition +# the atom size of GDDR5X (the smallest read request) is 32 bytes +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5X is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS + +# Use the same GDDR5 timing from hynix H5GQ1H24AFR +# disable bank groups for now, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=1:CCDL=0:RTPL=0" + +# Pascal has four schedulers per core +-gpgpu_num_sched_per_core 2 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +-power_simulation_enabled 1 +-gpuwattch_xml_file gpuwattch_gtx1080Ti.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + diff --git a/configs/deprecated-cfgs/SM6_GTX1080/gpuwattch_gtx1080Ti.xml b/configs/deprecated-cfgs/SM6_GTX1080/gpuwattch_gtx1080Ti.xml new file mode 100755 index 0000000..02619ff --- /dev/null +++ b/configs/deprecated-cfgs/SM6_GTX1080/gpuwattch_gtx1080Ti.xml @@ -0,0 +1,538 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/configs/deprecated-cfgs/SM6_P100/config_fermi_islip.icnt b/configs/deprecated-cfgs/SM6_P100/config_fermi_islip.icnt new file mode 100644 index 0000000..d26c8d9 --- /dev/null +++ b/configs/deprecated-cfgs/SM6_P100/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 60; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/SM6_P100/gpgpusim.config b/configs/deprecated-cfgs/SM6_P100/gpgpusim.config new file mode 100644 index 0000000..a5e6736 --- /dev/null +++ b/configs/deprecated-cfgs/SM6_P100/gpgpusim.config @@ -0,0 +1,156 @@ +# This config models the Pascal GP100 +# For more info about this card, see Nvidia White paper +# https://images.nvidia.com/content/pdf/tesla/whitepaper/pascal-architecture-whitepaper.pdf + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 60 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 28 +-gpgpu_n_cores_per_cluster 2 +-gpgpu_n_mem 32 +-gpgpu_n_sub_partition_per_mchannel 1 + +# Pscal clock domains +#-gpgpu_clock_domains ::: +# Pascal NVIDIA GP100 clock domains are adopted from +# https://en.wikipedia.org/wiki/Nvidia_Tesla +-gpgpu_clock_domains 1480.0:1480.0:1480.0:715.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 32 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_DP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_SFU,OC_EX_MEM,EX_WB +## Pascal GP102 has 4 SP SIMD units and 1 SFU unit +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 2,2,1,2,2,1,4 +-gpgpu_num_sp_units 2 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# SFU is 32-width in pascal, then dp units initiation is 1 cycle +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,1,1,1,4 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 2,2,2,2,130 + +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +# Pascal GP100 has 64KB Shared memory +# Pascal GP100 has 48KB L1 cache +-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:128:8,16 +-gpgpu_cache:dl1PrefL1 64:128:6,L:L:m:N:H,A:128:8,16 +-gpgpu_cache:dl1PrefShared 64:128:6,L:L:m:N:H,A:128:8,16 +-gpgpu_shmem_size 65536 +-gpgpu_shmem_size_PrefL1 65536 +-gpgpu_shmem_size_PrefShared 65536 +-gmem_skip_L1D 0 + +# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 3MB L2 cache +-gpgpu_cache:dl2 64:128:16,L:B:m:W:L,A:128:8,4:0,32 +-gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 32:32:32:32 + +# 4 KB Inst. +-gpgpu_cache:il1 8:128:4,L:R:f:N:L,A:2:48,4 +# 48 KB Tex +-gpgpu_tex_cache:l1 16:128:24,L:R:m:N:L,F:128:4,128:2 +# 12 KB Const +-gpgpu_const_cache:l1 128:64:2,L:R:f:N:L,A:2:64,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 14 +-gpgpu_operand_collector_num_units_sfu 8 +-gpgpu_operand_collector_num_units_mem 10 +-gpgpu_operand_collector_num_in_ports_sp 4 +-gpgpu_operand_collector_num_out_ports_sp 4 +-gpgpu_operand_collector_num_in_ports_sfu 1 +-gpgpu_operand_collector_num_out_ports_sfu 1 +-gpgpu_operand_collector_num_in_ports_mem 1 +-gpgpu_operand_collector_num_out_ports_mem 1 +-gpgpu_num_reg_banks 32 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +## In Pascal, a warp scheduler can issue 2 insts per cycle +-gpgpu_max_insn_issue_per_warp 2 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 116 + +# for HBM, 32 channles, each (128 bits) 16 bytes width +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 16 +-gpgpu_dram_burst_length 2 +-dram_data_command_freq_ratio 2 # HBM is DDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBBCCC.CCCSSSSS + +# HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) +# Timing for 1 GHZ +# tRRDl and tWTR are missing, need to be added +#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: +# CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" + +# Timing for 715 MHZ, Tesla Pascal P100 HBM runs at 715 MHZ +-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=10:RAS=24:RP=10:RC=34: + CL=10:WL=2:CDLR=3:WR=9:nbkgrp=4:CCDL=2:RTPL=3" + +# Fermi has two schedulers per core +-gpgpu_num_sched_per_core 2 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +-power_simulation_enabled 0 +-gpuwattch_xml_file gpuwattch_gtx480.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + diff --git a/configs/deprecated-cfgs/SM6_P100/gpuwattch_gtx480.xml b/configs/deprecated-cfgs/SM6_P100/gpuwattch_gtx480.xml new file mode 100755 index 0000000..304e0fd --- /dev/null +++ b/configs/deprecated-cfgs/SM6_P100/gpuwattch_gtx480.xml @@ -0,0 +1,538 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/configs/deprecated-cfgs/SM6_TITANX/config_fermi_islip.icnt b/configs/deprecated-cfgs/SM6_TITANX/config_fermi_islip.icnt new file mode 100644 index 0000000..602daee --- /dev/null +++ b/configs/deprecated-cfgs/SM6_TITANX/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 52; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/SM6_TITANX/gpgpusim.config b/configs/deprecated-cfgs/SM6_TITANX/gpgpusim.config new file mode 100644 index 0000000..28912a3 --- /dev/null +++ b/configs/deprecated-cfgs/SM6_TITANX/gpgpusim.config @@ -0,0 +1,157 @@ +# This config models the Pascal GP102 (NVIDIA TITAN X) +# For more info about this card, see Nvidia White paper +# http://international.download.nvidia.com/geforce-com/international/pdfs/GeForce_GTX_1080_Whitepaper_FINAL.pdf + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 61 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 28 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 12 +-gpgpu_n_sub_partition_per_mchannel 2 + +# Pascal clock domains +#-gpgpu_clock_domains ::: +# Pascal NVIDIA TITAN X clock domains are adopted from +# https://en.wikipedia.org/wiki/GeForce_10_series +-gpgpu_clock_domains 1417.0:1417.0:1417.0:2500.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 +-gpgpu_occupancy_sm_number 61 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 32 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_DP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_SFU,OC_EX_MEM,EX_WB +## Pascal GP102 has 4 SP SIMD units and 1 SFU unit +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 4,1,1,4,1,1,6 +-gpgpu_num_sp_units 4 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# SFU is 32-width in pascal, then dp units initiation is 1 cycle +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,1,1,1,4 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 4,8,4,4,130 + +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +# Pascal GP102 has 96KB Shared memory +# Pascal GP102 has 64KB L1 cache +# The defulat is to disable the L1 cache, unless cache modifieres is used +-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:128:8,16 +-gpgpu_cache:dl1PrefL1 64:128:6,L:L:m:N:H,A:128:8,16 +-gpgpu_cache:dl1PrefShared 64:128:6,L:L:m:N:H,A:128:8,16 +-gpgpu_shmem_size 98304 +-gpgpu_shmem_size_PrefL1 98304 +-gpgpu_shmem_size_PrefShared 98304 +-gmem_skip_L1D 1 + +# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 3MB L2 cache +-gpgpu_cache:dl2 64:128:16,L:B:m:W:L,A:128:8,4:0,32 +-gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 32:32:32:32 + +# 4 KB Inst. +-gpgpu_cache:il1 8:128:4,L:R:f:N:L,A:2:48,4 +# 48 KB Tex +-gpgpu_tex_cache:l1 16:128:24,L:R:m:N:L,F:128:4,128:2 +# 12 KB Const +-gpgpu_const_cache:l1 128:64:2,L:R:f:N:L,A:2:64,4 + +# enable operand collector +## larger operand collectors and reg_banks are needed for the 4 warp schedulers and 4 SIMD units +-gpgpu_operand_collector_num_units_sp 20 +-gpgpu_operand_collector_num_units_sfu 4 +-gpgpu_operand_collector_num_units_mem 8 +-gpgpu_operand_collector_num_in_ports_sp 4 +-gpgpu_operand_collector_num_out_ports_sp 4 +-gpgpu_operand_collector_num_in_ports_sfu 1 +-gpgpu_operand_collector_num_out_ports_sfu 1 +-gpgpu_operand_collector_num_in_ports_mem 1 +-gpgpu_operand_collector_num_out_ports_mem 1 +# gpgpu_num_reg_banks should be increased to 32 +-gpgpu_num_reg_banks 32 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +## In Pascal, a warp scheduler can issue 2 insts per cycle +-gpgpu_max_insn_issue_per_warp 2 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 116 + +# for NVIDIA TITAN X, bus width is 384bits (12 DRAM chips x 32 bits) +# 12 memory paritions, 4 bytes (1 DRAM chip) per memory partition +# the atom size of GDDR5X (the smallest read request) is 32 bytes +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5X is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS + +# Use the same GDDR5 timing from hynix H5GQ1H24AFR +# disable bank groups for now, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=1:CCDL=0:RTPL=0" + +# Fermi has two schedulers per core +-gpgpu_num_sched_per_core 4 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +-power_simulation_enabled 1 +-gpuwattch_xml_file gpuwattch_gtx480.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + diff --git a/configs/deprecated-cfgs/SM6_TITANX/gpuwattch_gtx480.xml b/configs/deprecated-cfgs/SM6_TITANX/gpuwattch_gtx480.xml new file mode 100755 index 0000000..304e0fd --- /dev/null +++ b/configs/deprecated-cfgs/SM6_TITANX/gpuwattch_gtx480.xml @@ -0,0 +1,538 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/configs/deprecated-cfgs/SM7_TITANV/config_fermi_islip.icnt b/configs/deprecated-cfgs/SM7_TITANV/config_fermi_islip.icnt new file mode 100644 index 0000000..fac792a --- /dev/null +++ b/configs/deprecated-cfgs/SM7_TITANV/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 64; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/deprecated-cfgs/SM7_TITANV/gpgpusim.config b/configs/deprecated-cfgs/SM7_TITANV/gpgpusim.config new file mode 100644 index 0000000..aefb04a --- /dev/null +++ b/configs/deprecated-cfgs/SM7_TITANV/gpgpusim.config @@ -0,0 +1,165 @@ +# This config models the Volta Titan X +# For more info about this card: +# http://images.nvidia.com/content/volta-architecture/pdf/volta-architecture-whitepaper.pdf +# https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8344474&tag=1# +# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf +# https://en.wikipedia.org/wiki/Volta_(microarchitecture) +# https://www.hotchips.org/wp-content/uploads/hc_archives/hc29/HC29.21-Monday-Pub/HC29.21.10-GPU-Gaming-Pub/HC29.21.132-Volta-Choquette-NVIDIA-Final3.pdf +# https://devblogs.nvidia.com/inside-volta/ +# http://on-demand.gputechconf.com/gtc/2017/presentation/s7798-luke-durant-inside-volta.pdf + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 70 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 40 +-gpgpu_n_cores_per_cluster 2 +-gpgpu_n_mem 24 +-gpgpu_n_sub_partition_per_mchannel 1 + +# volta clock domains +#-gpgpu_clock_domains ::: +# Pascal NVIDIA GP100 clock domains are adopted from +# https://en.wikipedia.org/wiki/Volta_(microarchitecture) +-gpgpu_clock_domains 1200.0:1200.0:1200.0:850.0 +# boost mode +# -gpgpu_clock_domains 1455.0:2000.0:1455.0:850.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 32 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_DP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_SFU,OC_EX_MEM,EX_WB +## Pascal GP100 has 2 SP SIMD units, 2 SFU units, 2 DP units per core +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 4,4,1,4,4,1,9 +-gpgpu_num_sp_units 4 +-gpgpu_num_sfu_units 4 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# All Div operations are executed on SFU unit +# Throughput (initiation latency) are adopted from +# http://on-demand.gputechconf.com/gtc/2018/presentation/s8122-dissecting-the-volta-gpu-architecture-through-microbenchmarking.pdf +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 2,2,2,2,8 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 2,2,2,2,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 4,4,4,4,130 + +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +# Volta GV100 has 64KB Shared memory +-gpgpu_cache:dl1 64:128:8,L:L:m:N:H,A:256:8,16:0 +-gpgpu_cache:dl1PrefL1 64:128:16,L:L:m:N:H,A:256:8,16:0 +-gpgpu_cache:dl1PrefShared 32:128:6,L:L:m:N:H,A:256:8,16:0 +-gpgpu_shmem_size 65536 +-gpgpu_shmem_size_PrefL1 1 +-gpgpu_shmem_size_PrefShared 98304 +-gmem_skip_L1D 0 + +# 64 sets, each 128 bytes 24-way for each memory sub partition (192 KB per memory sub partition). This gives 4.5MB L2 cache +-gpgpu_cache:dl2 64:128:24,L:B:m:W:L,A:256:4,32:0,32 +-gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 64:64:64:64 + +# 128 KB Inst. +-gpgpu_cache:il1 64:128:16,L:R:f:N:L,A:2:48,4 +# 48 KB Tex +-gpgpu_tex_cache:l1 16:128:24,L:R:m:N:L,F:128:4,128:2 +# 64 KB Const +-gpgpu_const_cache:l1 128:64:8,L:R:f:N:L,A:2:64,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 14 +-gpgpu_operand_collector_num_units_sfu 8 +-gpgpu_operand_collector_num_units_mem 10 +-gpgpu_operand_collector_num_in_ports_sp 4 +-gpgpu_operand_collector_num_out_ports_sp 4 +-gpgpu_operand_collector_num_in_ports_sfu 1 +-gpgpu_operand_collector_num_out_ports_sfu 1 +-gpgpu_operand_collector_num_in_ports_mem 1 +-gpgpu_operand_collector_num_out_ports_mem 1 +-gpgpu_num_reg_banks 32 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +## In Pascal, a warp scheduler can issue 2 insts per cycle +-gpgpu_max_insn_issue_per_warp 1 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 116 + +# for HBM, 32 channles, each (128 bits) 16 bytes width +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 16 +-gpgpu_dram_burst_length 2 +-dram_data_command_freq_ratio 2 # HBM is DDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBBCCC.CCCSSSSS + +# HBM timing are adopted from hynix JESD235 standered and nVidia HPCA 2017 paper (http://www.cs.utah.edu/~nil/pubs/hpca17.pdf) +# Timing for 1 GHZ +# tRRDl and tWTR are missing, need to be added +#-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=4:RCD=14:RAS=33:RP=14:RC=47: +# CL=14:WL=2:CDLR=3:WR=12:nbkgrp=4:CCDL=2:RTPL=4" + +# Timing for 715 MHZ, Tesla Pascal P100 HBM runs at 715 MHZ +-gpgpu_dram_timing_opt "nbk=16:CCD=1:RRD=3:RCD=10:RAS=24:RP=10:RC=34: + CL=10:WL=2:CDLR=3:WR=9:nbkgrp=4:CCDL=2:RTPL=3" + +# Fermi has two schedulers per core +-gpgpu_num_sched_per_core 4 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +-power_simulation_enabled 0 +-gpuwattch_xml_file gpuwattch_gtx480.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + diff --git a/configs/deprecated-cfgs/TeslaC2050/config_fermi_islip.icnt b/configs/deprecated-cfgs/TeslaC2050/config_fermi_islip.icnt new file mode 100644 index 0000000..a11bd8e --- /dev/null +++ b/configs/deprecated-cfgs/TeslaC2050/config_fermi_islip.icnt @@ -0,0 +1,70 @@ +//20*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 32; + +// currently we donot use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 26; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 8; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 2; +output_speedup = 1; +internal_speedup = 1.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; diff --git a/configs/deprecated-cfgs/TeslaC2050/gpgpusim.config b/configs/deprecated-cfgs/TeslaC2050/gpgpusim.config new file mode 100644 index 0000000..6ac2c12 --- /dev/null +++ b/configs/deprecated-cfgs/TeslaC2050/gpgpusim.config @@ -0,0 +1,133 @@ +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 20 + +# Using cuobjdump to extract ptx/SASS +#-gpgpu_ptx_use_cuobjdump 1 # use default + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + + +# high level architecture configuration +-gpgpu_n_clusters 14 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 6 +-gpgpu_n_sub_partition_per_mchannel 2 + +# Fermi clock domains +#-gpgpu_clock_domains ::: +# In Fermi, each pipeline has 16 execution units, so the Core clock needs to be divided +# by 2. (GPGPU-Sim simulates a warp (32 threads) in a single cycle). 1400/2 = 700 +-gpgpu_clock_domains 575.0:575.0:575.0:750.0 + +# shader core pipeline config +-gpgpu_shader_registers 32768 +-gpgpu_occupancy_sm_number 20 + +# This implies a maximum of 48 warps/SM +-gpgpu_shader_core_pipeline 1536:32 +-gpgpu_shader_cta 8 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +-gpgpu_pipeline_widths 2,1,1,2,1,1,2 +-gpgpu_num_sp_units 2 +-gpgpu_num_sfu_units 1 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,2,2,1,8 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 8,16,8,8,130 + + +# In Fermi, the cache and shared memory can be configured to 16kb:48kb(default) or 48kb:16kb +# ::,::::,::,:** +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +-gpgpu_cache:dl1 32:128:4,L:L:m:N:H,A:32:8,8 +-gpgpu_shmem_size 49152 + +# The alternative configuration for fermi in case cudaFuncCachePreferL1 is selected +#-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:32:8,8 +#-gpgpu_shmem_size 16384 + +# 64 sets, each 128 bytes 8-way for each memory sub partition. This gives 786KB L2 cache +-gpgpu_cache:dl2 64:128:8,L:B:m:W:L,A:32:4,4:0,32 +-gpgpu_cache:dl2_texture_only 0 + +-gpgpu_cache:il1 4:128:4,L:R:f:N:L,A:2:32,4 +-gpgpu_tex_cache:l1 4:128:24,L:R:m:N:L,F:128:4,128:2 +-gpgpu_const_cache:l1 64:64:2,L:R:f:N:L,A:2:32,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 6 +-gpgpu_operand_collector_num_units_sfu 8 +-gpgpu_operand_collector_num_in_ports_sp 2 +-gpgpu_operand_collector_num_out_ports_sp 2 +-gpgpu_num_reg_banks 16 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +-gpgpu_max_insn_issue_per_warp 1 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 750MHz / 575MHz = 130 +-gpgpu_frfcfs_dram_sched_queue_size 16 +-gpgpu_dram_return_queue_size 114 + +# for Fermi, bus width is 384bits, this is 8 bytes (4 bytes at each DRAM chip) per memory partition +-gpgpu_n_mem_per_ctrlr 2 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5 is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.BBBCCCCB.CCSSSSSS + +# GDDR5 timing from hynix H5GQ1H24AFR +# to disable bank groups, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" + +# Fermi has two schedulers per core +-gpgpu_num_sched_per_core 2 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 -- cgit v1.3