diff options
| -rw-r--r-- | configs/tested-cfgs/SM6_TITANX_64/config_pascal_islip.icnt | 73 | ||||
| -rw-r--r-- | configs/tested-cfgs/SM6_TITANX_64/gpgpusim.config | 181 |
2 files changed, 0 insertions, 254 deletions
diff --git a/configs/tested-cfgs/SM6_TITANX_64/config_pascal_islip.icnt b/configs/tested-cfgs/SM6_TITANX_64/config_pascal_islip.icnt deleted file mode 100644 index dec4789..0000000 --- a/configs/tested-cfgs/SM6_TITANX_64/config_pascal_islip.icnt +++ /dev/null @@ -1,73 +0,0 @@ -//21*1 fly with 32 flits per packet under gpgpusim injection mode -use_map = 0; -flit_size = 40; - -// currently we do not use this, see subnets below -network_count = 2; - -// Topology -topology = fly; -k = 52; -n = 1; - -// Routing - -routing_function = dest_tag; - -// Flow control - -num_vcs = 1; -vc_buf_size = 64; -input_buffer_size = 256; -ejection_buffer_size = 64; -boundary_buffer_size = 64; - -wait_for_tail_credit = 0; - -// Router architecture - -vc_allocator = islip; //separable_input_first; -sw_allocator = islip; //separable_input_first; -alloc_iters = 1; - -credit_delay = 0; -routing_delay = 0; -vc_alloc_delay = 1; -sw_alloc_delay = 1; - -input_speedup = 1; -output_speedup = 1; -internal_speedup = 2.0; - -// Traffic, GPGPU-Sim does not use this - -traffic = uniform; -packet_size ={{1,2,3,4},{10,20}}; -packet_size_rate={{1,1,1,1},{2,1}}; - -// Simulation - Don't change - -sim_type = gpgpusim; -//sim_type = latency; -injection_rate = 0.1; - -subnets = 2; - -// Always use read and write no matter following line -//use_read_write = 1; - - -read_request_subnet = 0; -read_reply_subnet = 1; -write_request_subnet = 0; -write_reply_subnet = 1; - -read_request_begin_vc = 0; -read_request_end_vc = 0; -write_request_begin_vc = 0; -write_request_end_vc = 0; -read_reply_begin_vc = 0; -read_reply_end_vc = 0; -write_reply_begin_vc = 0; -write_reply_end_vc = 0; - diff --git a/configs/tested-cfgs/SM6_TITANX_64/gpgpusim.config b/configs/tested-cfgs/SM6_TITANX_64/gpgpusim.config deleted file mode 100644 index dffc156..0000000 --- a/configs/tested-cfgs/SM6_TITANX_64/gpgpusim.config +++ /dev/null @@ -1,181 +0,0 @@ -# This config models the Pascal GP102 (NVIDIA TITAN X) -# For more info about this card, see Nvidia White paper -# http://international.download.nvidia.com/geforce-com/international/pdfs/GeForce_GTX_1080_Whitepaper_FINAL.pdf - -# functional simulator specification --gpgpu_ptx_instruction_classification 0 --gpgpu_ptx_sim_mode 0 --gpgpu_ptx_force_max_capability 61 --gpgpu_ignore_resources_limitation 1 - -# SASS execution (only supported with CUDA >= 4.0) --gpgpu_ptx_convert_to_ptxplus 0 --gpgpu_ptx_save_converted_ptxplus 0 - -# high level architecture configuration -# P102 has two semi-indp scheds per core, and two cores per cluster --gpgpu_n_clusters 28 --gpgpu_n_cores_per_cluster 2 --gpgpu_n_mem 12 --gpgpu_n_sub_partition_per_mchannel 2 - -# Pascal clock domains -#-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock> -# Pascal NVIDIA TITAN X clock domains are adopted from -# https://en.wikipedia.org/wiki/GeForce_10_series --gpgpu_clock_domains 1417.0:1417.0:1417.0:2500.0 - -# shader core pipeline config --gpgpu_shader_registers 32768 --gpgpu_occupancy_sm_number 62 - -# This implies a maximum of 32 warps/SM --gpgpu_shader_core_pipeline 1024:32 --gpgpu_shader_cta 16 --gpgpu_simd_model 1 - -# Pipeline widths and number of FUs -# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB -## Pascal GP102 has 4 SP SIMD units and 4 SFU units per SM. In this config, we split SM into two shader cores, each has 2 SPs and 2 SFUs -# There is no int unit in Pascal -## we need to scale the number of pipeline registers to be equal to the number of SP units --gpgpu_pipeline_widths 2,1,0,2,1,2,1,0,2,1,5 --gpgpu_num_sp_units 2 --gpgpu_num_sfu_units 2 --gpgpu_num_dp_units 1 - - -# Instruction latencies and initiation intervals -# "ADD,MAX,MUL,MAD,DIV" -# All Div operations are executed on SFU unit -# Throughput (initiation latency) are adopted from CUDA SDK document V8, section 5.4.1, Table 2 --ptx_opcode_latency_int 4,13,4,5,145 --ptx_opcode_initiation_int 1,1,1,1,4 --ptx_opcode_latency_fp 4,13,4,5,39 --ptx_opcode_initiation_fp 1,2,1,1,4 --ptx_opcode_latency_dp 8,19,8,8,330 --ptx_opcode_initiation_dp 8,8,8,8,130 --ptx_opcode_initiation_sfu 4 --ptx_opcode_latency_sfu 8 - - -# latencies and cache configs are adopted from: -# https://arxiv.org/pdf/1804.06826.pdf -# <nsets>:<bsize>:<assoc>,<rep>:<wr>:<alloc>:<wr_alloc>:<set_index_fn>,<mshr>:<N>:<merge>,<mq>:**<fifo_entry> -# ** Optional parameter - Required when mshr_type==Texture Fifo -# Note: Hashing set index function (H) only applies to a set size of 32 or 64. -# Pascal GP102 has 96KB Shared memory divided over 2 cores, each has 48KB -# Pascal GP102 has 2 banks L1 cache, where each is 24KB L1 cache -# The defulat is to disable the L1 cache, unless cache modifieres are used --gpgpu_cache:dl1 S:4:128:48,L:L:s:N:L,A:256:8,16:0,32 --gpgpu_cache:dl1PrefL1 S:4:128:48,L:L:s:N:L,A:256:8,16:0,32 --gpgpu_cache:dl1PrefShared S:4:128:48,L:L:s:N:L,A:256:8,16:0,32 --gpgpu_shmem_size 49152 --gpgpu_shmem_size_PrefL1 49152 --gpgpu_shmem_size_PrefShared 49152 -# By default, L1 cache is disabled in Pascal P102. -# requests with .nc modifier or __ldg mehtod will be cached in L1 cache even with gmem_skip_L1D=1 --gmem_skip_L1D 1 --icnt_flit_size 40 --gpgpu_n_cluster_ejection_buffer_size 32 --l1_latency 82 --smem_latency 24 --gpgpu_flush_l1_cache 1 - -# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 3MB L2 cache --gpgpu_cache:dl2 S:64:128:16,L:B:m:L:L,A:256:64,16:0,32 --gpgpu_cache:dl2_texture_only 0 --gpgpu_dram_partition_queues 32:32:32:32 --perf_sim_memcpy 1 --memory_partition_indexing 4 - -# 4 KB Inst. --gpgpu_cache:il1 N:8:128:4,L:R:f:N:L,S:2:48,4 -# 48 KB Tex -# Note, TEX is deprected in Pascal, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod --gpgpu_tex_cache:l1 N:16:128:24,L:R:m:N:L,T:128:4,128:2 -# 12 KB Const --gpgpu_const_cache:l1 N:128:64:2,L:R:f:N:L,S:2:64,4 - -# enable operand collector --gpgpu_operand_collector_num_units_sp 12 --gpgpu_operand_collector_num_units_sfu 6 --gpgpu_operand_collector_num_units_mem 8 --gpgpu_operand_collector_num_units_dp 6 --gpgpu_operand_collector_num_in_ports_sp 2 --gpgpu_operand_collector_num_out_ports_sp 2 --gpgpu_operand_collector_num_in_ports_sfu 2 --gpgpu_operand_collector_num_out_ports_sfu 2 --gpgpu_operand_collector_num_in_ports_mem 1 --gpgpu_operand_collector_num_out_ports_mem 1 --gpgpu_operand_collector_num_in_ports_dp 1 --gpgpu_operand_collector_num_out_ports_dp 1 --gpgpu_num_reg_banks 32 - -# shared memory bankconflict detection --gpgpu_shmem_num_banks 32 --gpgpu_shmem_limited_broadcast 0 --gpgpu_shmem_warp_parts 1 -# Use Pascal Coalsce arhitetecture --gpgpu_coalesce_arch 61 - -## In Pascal, a warp scheduler can issue 2 insts per cycle using 2 diff execution units --gpgpu_max_insn_issue_per_warp 2 --gpgpu_dual_issue_diff_exec_units 1 - -# interconnection --network_mode 1 --inter_config_file config_pascal_islip.icnt - -# memory partition latency config --rop_latency 120 --dram_latency 100 - -# dram model config --gpgpu_dram_scheduler 1 --gpgpu_frfcfs_dram_sched_queue_size 64 --gpgpu_dram_return_queue_size 64 - -# for NVIDIA TITAN X, bus width is 384bits (12 DRAM chips x 32 bits) -# 12 memory paritions, 4 bytes (1 DRAM chip) per memory partition -# the atom size of GDDR5X (the smallest read request) is 32 bytes --gpgpu_n_mem_per_ctrlr 1 --gpgpu_dram_buswidth 4 --gpgpu_dram_burst_length 8 --dram_data_command_freq_ratio 4 # GDDR5X is QDR --gpgpu_mem_address_mask 1 --gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS - -# Use the same GDDR5 timing, scaled to 2500MHZ --gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=8:RCD=16:RAS=37:RP=16:RC=52: - CL=16:WL=6:CDLR=7:WR=16:nbkgrp=4:CCDL=4:RTPL=3" - --dram_bnk_indexing_policy 0 --dram_bnkgrp_indexing_policy 1 - -#-Seperate_Write_Queue_Enable 1 -#-Write_Queue_Size 64:56:32 - -# Pascal 102 has four schedulers per core --gpgpu_num_sched_per_core 2 -# Two Level Scheduler with active and pending pools -#-gpgpu_scheduler two_level_active:6:0:1 -# Loose round robbin scheduler -#-gpgpu_scheduler lrr -# Greedy then oldest scheduler --gpgpu_scheduler gto - -# stat collection --gpgpu_memlatency_stat 14 --gpgpu_runtime_stat 500 --enable_ptx_file_line_stats 1 --visualizer_enabled 0 - -# power model configs, disable it untill we create a real energy model for Pascal 102 --power_simulation_enabled 0 - -# tracing functionality -#-trace_enabled 1 -#-trace_components WARP_SCHEDULER,SCOREBOARD -#-trace_sampling_core 0 - |