diff options
Diffstat (limited to 'configs/GeForceGTX750Ti/gpgpusim.config')
| -rw-r--r-- | configs/GeForceGTX750Ti/gpgpusim.config | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/configs/GeForceGTX750Ti/gpgpusim.config b/configs/GeForceGTX750Ti/gpgpusim.config new file mode 100644 index 0000000..8b030b6 --- /dev/null +++ b/configs/GeForceGTX750Ti/gpgpusim.config @@ -0,0 +1,130 @@ +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 52 + + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +-gpgpu_n_clusters 5 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 2 +-gpgpu_n_sub_partition_per_mchannel 1 + +# Maxwell clock domains +#-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock> +# In Maxwell, each pipeline has 32 execution units, so the Core clock is just the reported number. +-gpgpu_clock_domains 1137.0:1137.0:1137.0:2700.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 + +# This implies a maximum of 64 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 8 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_SFU,OC_EX_MEM,EX_WB +-gpgpu_pipeline_widths 2,1,1,2,1,1,2 +-gpgpu_num_sp_units 8 +-gpgpu_num_sfu_units 32 + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +-ptx_opcode_latency_int 6,12,13,13,210 +-ptx_opcode_initiation_int 1,1,1,1,4 +-ptx_opcode_latency_fp 6,12,6,6,374 +-ptx_opcode_initiation_fp 1,1,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 8,16,8,8,130 + +-gpgpu_cache:dl1 32:128:4,L:L:m:N:H,A:32:8,8 +-gmem_skip_L1D 1 +-gpgpu_shmem_size 65536 + +# The alternative configuration for fermi in case cudaFuncCachePreferL1 is selected +#-gpgpu_cache:dl1 64:128:6,L:L:m:N:H,A:32:8,8 +#-gpgpu_shmem_size 16384 + +# 1024 sets, each 128 bytes 8-way for each memory sub partition. This gives 2MB L2 cache +-gpgpu_cache:dl2 1024:128:8,L:B:m:W:L,A:32:4,4:0,32 +-gpgpu_cache:dl2_texture_only 0 + +-gpgpu_cache:il1 4:128:4,L:R:f:N:L,A:2:32,4 +-gpgpu_tex_cache:l1 16:128:32,L:R:m:N:L,F:128:4,128:2 +-gpgpu_const_cache:l1 64:64:2,L:R:f:N:L,A:2:32,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 6 +-gpgpu_operand_collector_num_units_sfu 8 +-gpgpu_operand_collector_num_in_ports_sp 2 +-gpgpu_operand_collector_num_out_ports_sp 2 +-gpgpu_num_reg_banks 16 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 + +-gpgpu_max_insn_issue_per_warp 2 + +# interconnection +-network_mode 1 +-inter_config_file config_fermi_islip.icnt + +# memory partition latency config +-rop_latency 150 +-dram_latency 130 + +# dram model config +-gpgpu_dram_scheduler 1 +# The DRAM return queue and the scheduler queue together should provide buffer +# to sustain the memory level parallelism to tolerate DRAM latency +# To allow 100% DRAM utility, there should at least be enough buffer to sustain +# the minimum DRAM latency (100 core cycles). I.e. +# Total buffer space required = 100 x 924MHz / 700MHz = 132 +-gpgpu_frfcfs_dram_sched_queue_size 16 +-gpgpu_dram_return_queue_size 300 + +# for Maxwell, bus width is 128bits, this is 64 bytes (32 bytes at each DRAM chip) per memory partition +-gpgpu_n_mem_per_ctrlr 2 +-gpgpu_dram_buswidth 32 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5 is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.BBBCCCCB.CCSSSSSS + +# GDDR5 timing from hynix H5GQ1H24AFR +# to disable bank groups, set nbkgrp to 1 and tCCDL and tRTPL to 0 +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=6:RCD=12:RAS=28:RP=12:RC=40: + CL=12:WL=4:CDLR=5:WR=12:nbkgrp=4:CCDL=3:RTPL=2" + +# Maxwell has four schedulers per core +-gpgpu_num_sched_per_core 4 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs +# power modeling is currently disabled for GTX750Ti. The gpuwattch_gtx750ti.xml file present is only a placeholder and has NOT been tested for accuracy. +# proper modeling of Maxwell power is planned, but should be considered completely unsupported at present. +-power_simulation_enabled 0 +-gpuwattch_xml_file gpuwattch_gtx750Ti.xml + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 |