diff options
Diffstat (limited to 'configs/tested-cfgs/SM3_KEPLER_TITAN')
| -rw-r--r-- | configs/tested-cfgs/SM3_KEPLER_TITAN/config_kepler_islip.icnt | 73 | ||||
| -rw-r--r-- | configs/tested-cfgs/SM3_KEPLER_TITAN/gpgpusim.config | 186 |
2 files changed, 259 insertions, 0 deletions
diff --git a/configs/tested-cfgs/SM3_KEPLER_TITAN/config_kepler_islip.icnt b/configs/tested-cfgs/SM3_KEPLER_TITAN/config_kepler_islip.icnt new file mode 100644 index 0000000..2fe3b53 --- /dev/null +++ b/configs/tested-cfgs/SM3_KEPLER_TITAN/config_kepler_islip.icnt @@ -0,0 +1,73 @@ +//21*1 fly with 32 flits per packet under gpgpusim injection mode +use_map = 0; +flit_size = 40; + +// currently we do not use this, see subnets below +network_count = 2; + +// Topology +topology = fly; +k = 38; +n = 1; + +// Routing + +routing_function = dest_tag; + +// Flow control + +num_vcs = 1; +vc_buf_size = 64; +input_buffer_size = 256; +ejection_buffer_size = 64; +boundary_buffer_size = 64; + +wait_for_tail_credit = 0; + +// Router architecture + +vc_allocator = islip; //separable_input_first; +sw_allocator = islip; //separable_input_first; +alloc_iters = 1; + +credit_delay = 0; +routing_delay = 0; +vc_alloc_delay = 1; +sw_alloc_delay = 1; + +input_speedup = 1; +output_speedup = 1; +internal_speedup = 2.0; + +// Traffic, GPGPU-Sim does not use this + +traffic = uniform; +packet_size ={{1,2,3,4},{10,20}}; +packet_size_rate={{1,1,1,1},{2,1}}; + +// Simulation - Don't change + +sim_type = gpgpusim; +//sim_type = latency; +injection_rate = 0.1; + +subnets = 2; + +// Always use read and write no matter following line +//use_read_write = 1; + + +read_request_subnet = 0; +read_reply_subnet = 1; +write_request_subnet = 0; +write_reply_subnet = 1; + +read_request_begin_vc = 0; +read_request_end_vc = 0; +write_request_begin_vc = 0; +write_request_end_vc = 0; +read_reply_begin_vc = 0; +read_reply_end_vc = 0; +write_reply_begin_vc = 0; +write_reply_end_vc = 0; + diff --git a/configs/tested-cfgs/SM3_KEPLER_TITAN/gpgpusim.config b/configs/tested-cfgs/SM3_KEPLER_TITAN/gpgpusim.config new file mode 100644 index 0000000..323d2d9 --- /dev/null +++ b/configs/tested-cfgs/SM3_KEPLER_TITAN/gpgpusim.config @@ -0,0 +1,186 @@ +# This config models the KEPLER (TITAN) +# For more info about this card, see Nvidia White paper +# https://wr0.wr.inf.h-brs.de/wr/hardware/nodes3/nvidia/NVIDIA-Kepler-GK110-Architecture-Whitepaper.pdf + +# functional simulator specification +-gpgpu_ptx_instruction_classification 0 +-gpgpu_ptx_sim_mode 0 +-gpgpu_ptx_force_max_capability 35 +-gpgpu_ignore_resources_limitation 1 + +# Device Limits +-gpgpu_stack_size_limit 1024 +-gpgpu_heap_size_limit 8388608 +-gpgpu_runtime_sync_depth_limit 2 +-gpgpu_runtime_pending_launch_count_limit 2048 + +# Compute Capability +-gpgpu_compute_capability_major 3 +-gpgpu_compute_capability_minor 5 + +# SASS execution (only supported with CUDA >= 4.0) +-gpgpu_ptx_convert_to_ptxplus 0 +-gpgpu_ptx_save_converted_ptxplus 0 + +# high level architecture configuration +# P102 has two semi-indp scheds per core, and two cores per cluster +-gpgpu_n_clusters 14 +-gpgpu_n_cores_per_cluster 1 +-gpgpu_n_mem 12 +-gpgpu_n_sub_partition_per_mchannel 2 + +# Kepler clock domains +#-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock> +# Kepler NVIDIA TITAN clock domains are adopted from +# https://en.wikipedia.org/wiki/GeForce_700_series +-gpgpu_clock_domains 837.0:837.0:837.0:1502.0 + +# shader core pipeline config +-gpgpu_shader_registers 65536 +-gpgpu_occupancy_sm_number 62 + +# This implies a maximum of 32 warps/SM +-gpgpu_shader_core_pipeline 2048:32 +-gpgpu_shader_cta 16 +-gpgpu_simd_model 1 + +# Pipeline widths and number of FUs +# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB +## Kepler has 6 SP SIMD units and 2 SFU units per SM. +# There is no int unit in kepler +## we need to scale the number of pipeline registers to be equal to the number of SP units +-gpgpu_pipeline_widths 6,4,0,2,1,6,4,0,2,1,12 +-gpgpu_num_sp_units 6 +-gpgpu_num_sfu_units 2 +-gpgpu_num_dp_units 4 + + +# Instruction latencies and initiation intervals +# "ADD,MAX,MUL,MAD,DIV" +# All Div operations are executed on SFU unit +# Throughput (initiation latency) are adopted from CUDA SDK document V8, section 5.4.1, Table 2 +-ptx_opcode_latency_int 4,13,4,5,145 +-ptx_opcode_initiation_int 1,1,1,1,4 +-ptx_opcode_latency_fp 4,13,4,5,39 +-ptx_opcode_initiation_fp 1,2,1,1,4 +-ptx_opcode_latency_dp 8,19,8,8,330 +-ptx_opcode_initiation_dp 2,8,8,8,130 +-ptx_opcode_initiation_sfu 2 +-ptx_opcode_latency_sfu 200 + +# <nsets>:<bsize>:<assoc>,<rep>:<wr>:<alloc>:<wr_alloc>:<set_index_fn>,<mshr>:<N>:<merge>,<mq>:**<fifo_entry> +# ** Optional parameter - Required when mshr_type==Texture Fifo +# Note: Hashing set index function (H) only applies to a set size of 32 or 64. +# The defulat is to disable the L1 cache, unless cache modifieres are used +-gpgpu_cache:dl1 S:4:128:32,L:L:s:N:L,A:256:8,16:0,32 +-gpgpu_cache:dl1PrefL1 S:4:128:96,L:L:s:N:L,A:256:8,16:0,32 +-gpgpu_cache:dl1PrefShared S:4:128:32,L:L:s:N:L,A:256:8,16:0,32 +-gpgpu_shmem_size 49152 +-gpgpu_shmem_sizeDefault 49152 +-gpgpu_shmem_size_PrefL1 16384 +-gpgpu_shmem_size_PrefShared 49152 +# By default, L1 cache is disabled in Kepler P102 and only enabled for local memory +# requests with .nc modifier or __ldg mehtod will be cached in L1 cache even with gmem_skip_L1D=1 +-gmem_skip_L1D 1 +-icnt_flit_size 40 +-gpgpu_n_cluster_ejection_buffer_size 32 +-l1_latency 82 +-smem_latency 24 +-gpgpu_flush_l1_cache 1 + +# 32 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives 1.5MB L2 cache +-gpgpu_cache:dl2 S:32:128:16,L:B:m:L:L,A:256:64,16:0,32 +-gpgpu_cache:dl2_texture_only 0 +-gpgpu_dram_partition_queues 32:32:32:32 +-perf_sim_memcpy 1 +-memory_partition_indexing 0 + +# 4 KB Inst. +-gpgpu_cache:il1 N:8:128:4,L:R:f:N:L,S:2:48,4 +# 48 KB Tex +-gpgpu_tex_cache:l1 N:16:128:24,L:R:m:N:L,T:128:4,128:2 +# 12 KB Const +-gpgpu_const_cache:l1 N:128:64:2,L:R:f:N:L,S:2:64,4 + +# enable operand collector +-gpgpu_operand_collector_num_units_sp 12 +-gpgpu_operand_collector_num_units_sfu 6 +-gpgpu_operand_collector_num_units_mem 8 +-gpgpu_operand_collector_num_units_dp 6 +-gpgpu_operand_collector_num_in_ports_sp 2 +-gpgpu_operand_collector_num_out_ports_sp 2 +-gpgpu_operand_collector_num_in_ports_sfu 2 +-gpgpu_operand_collector_num_out_ports_sfu 2 +-gpgpu_operand_collector_num_in_ports_mem 1 +-gpgpu_operand_collector_num_out_ports_mem 1 +-gpgpu_operand_collector_num_in_ports_dp 1 +-gpgpu_operand_collector_num_out_ports_dp 1 +-gpgpu_num_reg_banks 32 + +# shared memory bankconflict detection +-gpgpu_shmem_num_banks 32 +-gpgpu_shmem_limited_broadcast 0 +-gpgpu_shmem_warp_parts 1 +# Use kepler Coalsce arhitetecture +-gpgpu_coalesce_arch 35 + +## In Kepler, a warp scheduler can issue 2 insts per cycle +-gpgpu_max_insn_issue_per_warp 2 +-gpgpu_dual_issue_diff_exec_units 0 + +# interconnection +-network_mode 1 +-inter_config_file config_kepler_islip.icnt + +# memory partition latency config +-rop_latency 120 +-dram_latency 100 + +# dram model config +-gpgpu_dram_scheduler 1 +-gpgpu_frfcfs_dram_sched_queue_size 64 +-gpgpu_dram_return_queue_size 64 + +# for NVIDIA TITAN, bus width is 384bits (12 DRAM chips x 32 bits) +# 12 memory paritions, 4 bytes (1 DRAM chip) per memory partition +# the atom size of GDDR5X (the smallest read request) is 32 bytes +-gpgpu_n_mem_per_ctrlr 1 +-gpgpu_dram_buswidth 4 +-gpgpu_dram_burst_length 8 +-dram_data_command_freq_ratio 4 # GDDR5X is QDR +-gpgpu_mem_address_mask 1 +-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS + +# Use the same GDDR5 timing, scaled to 2500MHZ +-gpgpu_dram_timing_opt "nbk=16:CCD=2:RRD=8:RCD=16:RAS=37:RP=16:RC=52: + CL=16:WL=6:CDLR=7:WR=16:nbkgrp=4:CCDL=4:RTPL=3" + +-dram_bnk_indexing_policy 0 +-dram_bnkgrp_indexing_policy 1 + +#-Seperate_Write_Queue_Enable 1 +#-Write_Queue_Size 64:56:32 + +# Kepler TITAN has four schedulers per core +-gpgpu_num_sched_per_core 4 +# Two Level Scheduler with active and pending pools +#-gpgpu_scheduler two_level_active:6:0:1 +# Loose round robbin scheduler +#-gpgpu_scheduler lrr +# Greedy then oldest scheduler +-gpgpu_scheduler gto + +# stat collection +-gpgpu_memlatency_stat 14 +-gpgpu_runtime_stat 500 +-enable_ptx_file_line_stats 1 +-visualizer_enabled 0 + +# power model configs, disable it untill we create a real energy model for Kepler +-power_simulation_enabled 0 + +# tracing functionality +#-trace_enabled 1 +#-trace_components WARP_SCHEDULER,SCOREBOARD +#-trace_sampling_core 0 + |