summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-08-14A much easier way to attempt to fix the problem targeted by CL12362 is to ↵Andrew M. B. Boktor
just print the stats whenever a kernel is done. This requires decoupling updating the stats from printing them and modifying the printing code to accomodate this change. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12366]
2014-08-14When a kernel is done, it doesn't mean it finished executing. Instructions ↵Andrew M. B. Boktor
could have a few cycles left (e.g. memory). To prevent the problem with the race condition, no stream operations are allowed to launch until the kernel that has finished finished executing. The loop will exit, the kernel prints its stats, then in the next iteration the next operation is allowed to launch. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12362]
2014-08-14Removing a wrong commentAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12358]
2014-08-14Fixing a potential problem.Andrew M. B. Boktor
Right now this doesn't cause any trouble becaue increment_thread_id guarantees that this particular part of the condition is never false (in correct operation) Normal kernel configuration have the z dimention smaller than the x dimention which causes it to be always true, but with a weird configuration, this is a potential place for failure. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12357]
2014-08-14Fixes a rare race condition that prevents the kernel stats from being printed.Andrew M. B. Boktor
Merging //depot/gpgpu_sim_research/fermi_replay/distribution/src/gpgpusim_entrypoint.cc to //depot/gpgpu_sim_research/fermi/distribution/src/gpgpusim_entrypoint.cc [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12356]
2014-08-14Removing some bottlenecks that limit that peak-IPCAndrew M. B. Boktor
- FUs depended on the result bus to know if they are going to be used on a certain cycle, this is not the case anymore, occupied bitvectors are added - A configurable number of result buses is added (the number of buses is equal to the EX_WB pipe width) - Modified the Fermi config file to add two ports to the operand collector IPC with a theoretical limit of number_of_SMs*64 is achievable using this configuration [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12349]
2014-08-14Integrated in CL12342 from coherence branch; fix for bug #160Inderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12343]
2014-08-14Adding configurable instruction latencies and initiation intervalsAndrew M. B. Boktor
The observed latencies are reduced by 5 to account for other stages in the SM pipeline Eventually this should be calibrated against the microbenchmarks [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12310]
2014-08-14Using only move_out_to to move pipeline registersAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12305]
2014-08-14Supporting the option for removing temporary filesAndrew M. B. Boktor
. the option -gpgpu_ptx_save_converted_ptxplus allows keeping the ptxplus file . the option -gpgpu_keep allows keeping intermediate files used to communicate with other programs (e.g. cuobjdump) [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12304]
2014-08-141. Fixing ptx with sm_20Andrew M. B. Boktor
2. Fixing the choice of files (since new we can choose) 3. Not allowing sm_20 with PTXPlus, forcing max capability it to 19 and printing a warning [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12279]
2014-08-14Ensuring the correct ptxas is usedAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12269]
2014-08-14Adding support in the simulator for addition with carry specified in a given ↵Andrew M. B. Boktor
predicate register (calling it addp) Adding support in cuobjdump_to_ptxplus for IADD.CARRY* which translates to the above Now power benchmarks should work [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12266]
2014-08-14Integrated in CL12250 from coherence branch - fix for atomic payload bug ↵Inderpreet Singh
(see Bug #133) [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12257]
2014-08-14Using nvcc present in CUDA_INSTALL_PATH instead of the one in PATHAndrew M. B. Boktor
Adding -DCUDART_VERSION to CXXFLAGS [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12253]
2014-08-14Changing writeback arbitration among multiple clients ↵Wilson Fung
(shared,tex,const,global/local,L1D) in ldst unit to round-robin. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12248]
2014-08-14Removing a wrong commentAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12203]
2014-08-14Removing all remaining traced of decudaAndrew M. B. Boktor
Stopping if someone tries to use PTXPlus without cuobjdump [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12138]
2014-08-14This changelist adds the following:Andrew M. B. Boktor
1. A configurable number of functional units within each SM 2. A configurable pipeline widths (i.e. Issue width, writeback width ...). Merging //depot/gpgpu_sim_research/fermi_replay/distribution/src/... to //depot/gpgpu_sim_research/fermi/distribution/src/... [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12091]
2014-08-14Supporting ptxas from CUDA 4.0Andrew M. B. Boktor
Simply ignoring some lines [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12054]
2014-08-14Changing the configs to be backward compatible by disabling bank groups by ↵Andrew M. B. Boktor
default if its configurations are not present [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12033]
2014-08-14Allowing capability up to sm_20, fixed ocl failuresAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12025]
2014-08-14This changelist implements the following:Andrew M. B. Boktor
1. Adds support for using cuobjdump for both ptx and ptxplus execution. This has been tested with CUDA 4.0 . Ptxplus is no longer supported through decuda/decuda_to_ptxplus 2. Adds support for converting the SASS output by cuobjdump to ptxplus. This has been tested with CUDA 4.0 . The old path that extracts ptx from cubin files is still preserved 3. Adds a bank group model. (WARNING: memory config has changed, please adapt yours). To disable the bank groups model, set nbkgrp to 1 and tCCDL and tRTPL to 0 Diff the configuration files to learn about how to use those new options. Merging //depot/gpgpu_sim_research/fermi-test/distribution/... to //depot/gpgpu_sim_research/fermi/distribution/... [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12023]
2014-08-14MergingAndrew M. B. Boktor
//depot/gpgpu_sim_research/fermi-test/distribution/src/intersim/... to //depot/gpgpu_sim_research/fermi/distribution/src/intersim/... Fixes a segmentation fault that happens with newer gcc. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11939]
2014-08-14Adding 64-bit support for atomicAdd, atomicExch, atomicCAS and created a ↵Wilson Fung
brief directed test. Added floating point support for atomicAdd without testing. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11894]
2014-08-14Integration change. Fixing bug for #149: A pathological case that caused LD ↵Wilson Fung
instructions to be over counted when the LD instruction is stalled for a long time after sending part of its memory requests. Those memory requests manage to return before the LD is done sending all of its requests. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11888]
2014-08-14-Bug 146 fix (Adding perfect memory interface)Ahmed El-Shafiey
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11877]
2014-08-14Fixing bug 145. Now partition_address() works for non-power-of-two number ↵Wilson Fung
of memory partition as well (before it just leaves the memory address unchanged!). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11755]
2014-08-14Fix for bug 144. Now warp parts option is used in coalescing logic (before ↵Wilson Fung
it was always hardcoded to 2). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11742]
2014-08-14Adding a description of what assumptions are made.Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11728]
2014-08-14Fixing a bug introduced by the fix of bug 142Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11725]
2014-08-14Fix for bug 142Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11724]
2014-08-14change copyright noticeTor Aamodt
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11588]
2014-08-14version 3.0.2Tor Aamodt
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11587]
2014-08-14Forgot to remove the commented incorrect code in addrdec.cc.Wilson Fung
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11577]
2014-08-14Changed arch_rech type to store 16 registers, 8 input and 8 output. 8 inputs ↵Inderpreet Singh
because one can have 4 input operands and 4 register operands in a surface store instruction. Fixed arch_regs for memory instructions being ignored in the pre-decode statge. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11576]
2014-08-14Cleaned up the sweep_test() in addrdec.cc to use tr1_hash_map.Wilson Fung
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11575]
2014-08-14Fixed bug 137. Now memory address mapping with non-power-of-two memory ↵Wilson Fung
partitions will not lead to address aliasing. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11574]
2014-08-14Fixed address operands of PTX memory instructions being ignored in ↵Inderpreet Singh
predecode. See Bug 138 [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11573]
2014-08-14removing unused functionTor Aamodt
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11571]
2014-08-14Fixed the how the Pending Hits are displayed in simulation logs. See Bug ↵Wilson Fung
136 for details. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11530]
2014-08-14Now atomic operation will change the cache line status to modified at a hit, ↵Wilson Fung
and set the line to modified at fill (when it misses the cache). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11527]
2014-08-14Changing the defaults for ROP and DRAM latency to match Quadro config as ↵Wilson Fung
before (totals to 115 cycles of latency). Changing the Fermi config to specify the different latency parameters. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11523]
2014-08-14Turned ROP and DRAM latency/delays into optionsInderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11522]
2014-08-14Added fixed latency queue for modeling DRAM latencyInderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11521]
2014-08-14Adding a check for copmliance between the runtime simulation config and ↵Wilson Fung
MAX_THREAD_PER_SM. Also decreased LOCAL_MEM_SIZE_MAX to 8kB to make it fit within our allotted memory space (otherwise the simulator may mistaken global memory access as local memory accesses). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11520]
2014-08-14Fixing upper bound on threads/SMAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11518]
2014-08-14Changes needed for the new fermi configs to work.Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11511]
2014-08-14Adding option 'gpgpu_simt_core_sim_order' which allow the user to specify ↵Wilson Fung
the order in which cores are simulator per cycle. Also adding support for calling function with empty parameter list. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11489]
2014-08-14removing old barrier implementation (no longer used)Tor Aamodt
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11486]
generated by cgit v1.3 (git 2.53.0) at 2026-07-10 23:37:01 +0000