164 files changed, 16610 insertions, 1862 deletions
diff --git a/CHANGES b/CHANGES
index 7964153..5d1cd10 100644
--- a/CHANGES
+++ b/CHANGES
@@ -1,4 +1,8 @@
 LOG:
+Version 4.2.0 vs 4.1.0 
+- Added AccelWattch power model v1.0 which replaces GPUWattch. 
+- Added AccelWattch XML configuration files for SM7_QV100, SM7_TITANV, SM75_RTX2060_S, SM6_TITANX. Note that all these AccelWattch XML configuration files are tuned only for SM7_QV100. 
+
 Version 4.1.0 versus 4.0.0
 -Features:
 1- Supporting L1 write-allocate with sub-sector writing policy as in Volta+ hardware, and changing the Volta+ cards config to make L1 write-allocate with write-through
diff --git a/COPYRIGHT b/COPYRIGHT
index a4eea29..1c949f9 100644
--- a/COPYRIGHT
+++ b/COPYRIGHT
@@ -44,3 +44,33 @@ per UBC policy 88, item 2.3 on literary works) these students names appear in
 the copyright notices of the respective files. UBC is also mentioned in the 
 copyright notice to highlight that was the author's affiliation when the work 
 was performed.
+
+NOTE 3: AccelWattch and all its components are covered by the following license and copyright.
+Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+\ No newline at end of file
diff --git a/Makefile b/Makefile
index d248211..82ea399 100644
--- a/Makefile
+++ b/Makefile
@@ -87,7 +87,7 @@ ifneq ($(GPGPUSIM_POWER_MODEL),)
 		MCPAT_DBG_FLAG = dbg
 	endif
 
-	MCPAT_OBJ_DIR = $(SIM_OBJ_FILES_DIR)/gpuwattch
+	MCPAT_OBJ_DIR = $(SIM_OBJ_FILES_DIR)/accelwattch
 
 	MCPAT = $(MCPAT_OBJ_DIR)/*.o
 endif
@@ -117,24 +117,24 @@ check_setup_environment:
 	 fi 
 
 check_power:
-	@if [ -d "$(GPGPUSIM_ROOT)/src/gpuwattch/" -a ! -n "$(GPGPUSIM_POWER_MODEL)" ]; then \
+	@if [ -d "$(GPGPUSIM_ROOT)/src/accelwattch/" -a ! -n "$(GPGPUSIM_POWER_MODEL)" ]; then \
 		echo ""; \
-		echo "	Power model detected in default directory ($(GPGPUSIM_ROOT)/src/gpuwattch) but GPGPUSIM_POWER_MODEL not set."; \
-		echo "	Please re-run setup_environment or manually set GPGPUSIM_POWER_MODEL to the gpuwattch directory if you would like to include the GPGPU-Sim Power Model."; \
+		echo "	Power model detected in default directory ($(GPGPUSIM_ROOT)/src/accelwattch) but GPGPUSIM_POWER_MODEL not set."; \
+		echo "	Please re-run setup_environment or manually set GPGPUSIM_POWER_MODEL to the accelwattch directory if you would like to include the GPGPU-Sim Power Model."; \
 		echo ""; \
 		true; \
 	elif [ ! -d "$(GPGPUSIM_POWER_MODEL)" ]; then \
 		echo ""; \
 		echo "ERROR ** Power model directory invalid."; \
 		echo "($(GPGPUSIM_POWER_MODEL)) is not a valid directory."; \
-		echo "Please set GPGPUSIM_POWER_MODEL to the GPGPU-Sim gpuwattch directory."; \
+		echo "Please set GPGPUSIM_POWER_MODEL to the GPGPU-Sim accelwattch directory."; \
 		echo ""; \
 		exit 101; \
 	elif [ -n "$(GPGPUSIM_POWER_MODEL)" -a ! -f "$(GPGPUSIM_POWER_MODEL)/gpgpu_sim.verify" ]; then \
 		echo ""; \
 		echo "ERROR ** Power model directory invalid."; \
 		echo "gpgpu_sim.verify not found in $(GPGPUSIM_POWER_MODEL)."; \
-		echo "Please ensure that GPGPUSIM_POWER_MODEL points to a valid gpuwattch directory and that you have the correct GPGPU-Sim mcpat distribution."; \
+		echo "Please ensure that GPGPUSIM_POWER_MODEL points to a valid accelwattch directory and that you have the correct GPGPU-Sim mcpat distribution."; \
 		echo ""; \
 		exit 102; \
 	fi
@@ -243,8 +243,8 @@ makedirs:
 	if [ ! -d $(SIM_OBJ_FILES_DIR)/libopencl/bin ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/libopencl/bin; fi;
 	if [ ! -d $(SIM_OBJ_FILES_DIR)/$(INTERSIM) ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/$(INTERSIM); fi;
 	if [ ! -d $(SIM_OBJ_FILES_DIR)/cuobjdump_to_ptxplus ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/cuobjdump_to_ptxplus; fi;
-	if [ ! -d $(SIM_OBJ_FILES_DIR)/gpuwattch ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/gpuwattch; fi;
-	if [ ! -d $(SIM_OBJ_FILES_DIR)/gpuwattch/cacti ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/gpuwattch/cacti; fi;
+	if [ ! -d $(SIM_OBJ_FILES_DIR)/accelwattch ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/accelwattch; fi;
+	if [ ! -d $(SIM_OBJ_FILES_DIR)/accelwattch/cacti ]; then mkdir -p $(SIM_OBJ_FILES_DIR)/accelwattch/cacti; fi;
 
 all:
 	$(MAKE) gpgpusim
diff --git a/README.md b/README.md
index 3e8dc30..d0b14cd 100644
--- a/README.md
+++ b/README.md
@@ -1,8 +1,8 @@
 Welcome to GPGPU-Sim, a cycle-level simulator modeling contemporary graphics
 processing units (GPUs) running GPU computing workloads written in CUDA or
 OpenCL. Also included in GPGPU-Sim is a performance visualization tool called
-AerialVision and a configurable and extensible energy model called GPUWattch.
-GPGPU-Sim and GPUWattch have been rigorously validated with performance and
+AerialVision and a configurable and extensible power model called AccelWattch.
+GPGPU-Sim and AccelWattch have been rigorously validated with performance and
 power measurements of real hardware GPUs.
 
 This version of GPGPU-Sim has been tested with a subset of CUDA version 4.2,
@@ -38,12 +38,11 @@ Md Aamir Raihan, Negar Goli, Tor Aamodt,
 Modeling Deep Learning Accelerator Enabled GPUs, arXiv:1811.08309, 
 https://arxiv.org/abs/1811.08309
 
-If you use the GPUWattch energy model in your research, please cite:
+If you use the AccelWattch power model in your research, please cite:
 
-Jingwen Leng, Tayler Hetherington, Ahmed ElTantawy, Syed Gilani, Nam Sung Kim,
-Tor M. Aamodt, Vijay Janapa Reddi, GPUWattch: Enabling Energy Optimizations in
-GPGPUs, In proceedings of the ACM/IEEE International Symposium on Computer
-Architecture (ISCA 2013), Tel-Aviv, Israel, June 23-27, 2013.
+Vijay Kandiah, Scott Peverelle, Mahmoud Khairy, Junrui Pan, Amogh Manjunath, Timothy G. Rogers, Tor M. Aamodt, and Nikos Hardavellas. 2021.
+AccelWattch: A Power Modeling Framework for Modern GPUs. In MICRO54: 54th Annual IEEE/ACM International Symposium on Microarchitecture
+(MICRO ’21), October 18–22, 2021, Virtual Event, Greece.
 
 If you use the support for CUDA dynamic parallelism in your research, please cite:
 
@@ -62,8 +61,8 @@ This file contains instructions on installing, building and running GPGPU-Sim.
 Detailed documentation on what GPGPU-Sim models, how to configure it, and a
 guide to the source code can be found here: <http://gpgpu-sim.org/manual/>.
 Instructions for building doxygen source code documentation are included below.
-Detailed documentation on GPUWattch including how to configure it and a guide
-to the source code can be found here: <http://gpgpu-sim.org/gpuwattch/>.
+
+Previous versions of GPGPU-Sim (3.2.0 to 4.1.0) included the [GPUWattch Energy model](http://gpgpu-sim.org/gpuwattch/) which has been replaced by AccelWattch version 1.0 in GPGPU-Sim version 4.2.0. AccelWattch supports modern GPUs and is validated against a NVIDIA Volta QV100 GPU. Detailed documentation on AccelWattch can be found here: [AccelWattch Overview](https://github.com/VijayKandiah/accel-sim-framework#accelwattch-overview) and [AccelWattch MICRO'21 Artifact Manual](https://github.com/VijayKandiah/accel-sim-framework/blob/release/AccelWattch.md).
 
 If you have questions, please sign up for the google groups page (see
 gpgpu-sim.org), but note that use of this simulator does not imply any level of
@@ -108,21 +107,20 @@ library (part of the CUDA toolkit). Code to interface with the CUDA Math
 library is contained in cuda-math.h, which also includes several structures
 derived from vector_types.h (one of the CUDA header files).
 
-## GPUWattch Energy Model
+## AccelWattch Power Model
 
-GPUWattch (introduced in GPGPU-Sim 3.2.0) was developed by researchers at the
-University of British Columbia, the University of Texas at Austin, and the
-University of Wisconsin-Madison. Contributors to GPUWattch include Tor
-Aamodt's research group at the University of British Columbia: Tayler
-Hetherington and Ahmed ElTantawy; Vijay Reddi's research group at the
-University of Texas at Austin: Jingwen Leng; and Nam Sung Kim's research group
-at the University of Wisconsin-Madison: Syed Gilani.
+AccelWattch (introduced in GPGPU-Sim 4.2.0) was developed by researchers at 
+Northwestern University, Purdue University, and the University of British Columbia. 
+Contributors to AccelWattch include Nikos Hardavellas's research group at Northwestern University: 
+Vijay Kandiah; Tor Aamodt's research group at the University of British Columbia: Scott Peverelle; 
+and Timothy Rogers's research group at Purdue University: Mahmoud Khairy, Junrui Pan, and Amogh Manjunath. 
 
-GPUWattch leverages McPAT, which was developed by Sheng Li et al. at the
+AccelWattch leverages McPAT, which was developed by Sheng Li et al. at the
 University of Notre Dame, Hewlett-Packard Labs, Seoul National University, and
-the University of California, San Diego. The paper can be found at
+the University of California, San Diego. The McPAT paper can be found at
 http://www.hpl.hp.com/research/mcpat/micro09.pdf.
 
+
 # INSTALLING, BUILDING and RUNNING GPGPU-Sim
 
 Assuming all dependencies required by GPGPU-Sim are installed on your system,
@@ -316,15 +314,16 @@ need to re-compile your application simply to run it on GPGPU-Sim.
 To revert back to running on the hardware, remove GPGPU-Sim from your
 LD_LIBRARY_PATH environment variable.
 
-The following GPGPU-Sim configuration options are used to enable GPUWattch
+The following GPGPU-Sim configuration options are used to enable AccelWattch
 
 	-power_simulation_enabled 1 (1=Enabled, 0=Not enabled)
-	-gpuwattch_xml_file <filename>.xml
-
+	-power_simulation_mode 0 (0=AccelWattch_SASS_SIM or AccelWattch_PTX_SIM, 1=AccelWattch_SASS_HW, 2=AccelWattch_SASS_HYBRID)
+	-accelwattch_xml_file <filename>.xml
 
-The GPUWattch XML configuration file name is set to gpuwattch.xml by default and
-currently only supplied for GTX480 (default=gpuwattch_gtx480.xml). Please refer to
-<http://gpgpu-sim.org/gpuwattch/> for more information.
+The AccelWattch XML configuration file name is set to accelwattch_sass_sim.xml by default and is
+currently provided for SM7_QV100, SM7_TITANV, SM75_RTX2060_S, and SM6_TITANX. 
+Note that all these AccelWattch XML configuration files are tuned only for SM7_QV100. Please refer to
+<https://github.com/VijayKandiah/accel-sim-framework#accelwattch-overview> for more information.
 
 Running OpenCL applications is identical to running CUDA applications. However,
 OpenCL applications need to communicate with the NVIDIA driver in order to
diff --git a/configs/tested-cfgs/SM6_TITANX/accelwattch_ptx_sim.xml b/configs/tested-cfgs/SM6_TITANX/accelwattch_ptx_sim.xml
new file mode 100644
index 0000000..d94d5bd
--- /dev/null
+++ b/configs/tested-cfgs/SM6_TITANX/accelwattch_ptx_sim.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="11.44089762" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="21.76302498" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="7.737353491" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.618027871" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.53469516" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="13.9055689" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.313660815" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.053279375" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.079919063" /> <!--Register Writes-->
+		<param name="INT_ACC" value="3.429666768" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.711591276" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.742812382" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.148636575" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.212559571" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.241271438" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.59034036" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.212555149" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.702043615" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.282564496" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="2.485" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.212559047" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.02772" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.0336" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.00924" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.046834662" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.670605032" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="3.269555394" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.18020968" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="83.18977901" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.0257" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.01021" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.02466" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.290770573" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.252598514" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.121706665" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.599926258" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="25.84876211" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM6_TITANX/accelwattch_ptx_sim_alt.xml b/configs/tested-cfgs/SM6_TITANX/accelwattch_ptx_sim_alt.xml
new file mode 100644
index 0000000..0c6f211
--- /dev/null
+++ b/configs/tested-cfgs/SM6_TITANX/accelwattch_ptx_sim_alt.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.827711067" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="8.827711067" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="8.545163843" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.545163843" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="8.545163843" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="8.545163843" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.763326296" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.126123699" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.126123699" /> <!--Register Writes-->
+		<param name="INT_ACC" value="2.851008299" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.723984758" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.723979435" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.119939033" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.147036868" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.234782354" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.594393568" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.147037283" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.920933945" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.18425577" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.656666667" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.147036868" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.03058335" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.03058335" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.03058335" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="2.032318132" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.032318132" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="2.032318132" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.032318132" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="70.15055938" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.01" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.1" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.1" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.235290825" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.250616643" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.327155759" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.992722677" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="26.46013946" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM6_TITANX/accelwattch_sass_sim.xml b/configs/tested-cfgs/SM6_TITANX/accelwattch_sass_sim.xml
new file mode 100644
index 0000000..570332d
--- /dev/null
+++ b/configs/tested-cfgs/SM6_TITANX/accelwattch_sass_sim.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="10" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.661" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.593489331" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="29.735231" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.835033124" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="10.95446778" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.679656761" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="17.67551799" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.1107" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.1233" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="0.779992642" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.100560581" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.140604679" /> <!--Register Writes-->
+		<param name="INT_ACC" value="14.98768151" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.529670751" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.777229051" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.115098047" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.089517055" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.195089274" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.125521663" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.13336307" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.36204415" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.1321288" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.815454621" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.115100088" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.025941068" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.031443719" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.008647023" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.260867526" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.394535301" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="4.124916" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.222707601" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="32.09037703" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.514" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM6_TITANX/accelwattch_sass_sim_alt.xml b/configs/tested-cfgs/SM6_TITANX/accelwattch_sass_sim_alt.xml
new file mode 100644
index 0000000..9998e96
--- /dev/null
+++ b/configs/tested-cfgs/SM6_TITANX/accelwattch_sass_sim_alt.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="16" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="2" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="9.967097889" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="9.967097889" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.382262155" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="9.382262155" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="9.382262155" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="9.382262155" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.5" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.5" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.045696662" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.096144789" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.134430479" /> <!--Register Writes-->
+		<param name="INT_ACC" value="18.18093465" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.810674358" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="1.061592439" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.114254558" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.155989373" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.377990392" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.155990168" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.155991536" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.571396061" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.155989896" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.013271823" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.167780179" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.032236806" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.032236806" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.032236806" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.175516289" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="1.175516289" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="1.175516289" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.175516289" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="77.25" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.4" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM6_TITANX/gpgpusim.config b/configs/tested-cfgs/SM6_TITANX/gpgpusim.config
index 5b243a5..652f0a0 100644
--- a/configs/tested-cfgs/SM6_TITANX/gpgpusim.config
+++ b/configs/tested-cfgs/SM6_TITANX/gpgpusim.config
@@ -1,3 +1,32 @@
+# Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+# Northwestern University, Purdue University, The University of British Columbia
+# All rights reserved.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer;
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution;
+# 3. Neither the names of Northwestern University, Purdue University,
+#    The University of British Columbia nor the names of their contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
 # This config models the Pascal GP102 (NVIDIA TITAN X)
 # For more info about this card, see Nvidia White paper
 # http://international.download.nvidia.com/geforce-com/international/pdfs/GeForce_GTX_1080_Whitepaper_FINAL.pdf
@@ -28,6 +57,7 @@
 -gpgpu_n_cores_per_cluster 1
 -gpgpu_n_mem 12
 -gpgpu_n_sub_partition_per_mchannel 2 
+-gpgpu_clock_gated_lanes 1
 
 # Pascal clock domains
 #-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock>
@@ -170,11 +200,8 @@
 -enable_ptx_file_line_stats 1
 -visualizer_enabled 0
 
-# power model configs, disable it untill we create a real energy model for Pascal 102
--power_simulation_enabled 0
 
 # tracing functionality
 #-trace_enabled 1
 #-trace_components WARP_SCHEDULER,SCOREBOARD
 #-trace_sampling_core 0
-
diff --git a/configs/tested-cfgs/SM75_RTX2060/gpgpusim.config b/configs/tested-cfgs/SM75_RTX2060/gpgpusim.config
index 0ae91a5..2a9bff0 100644
--- a/configs/tested-cfgs/SM75_RTX2060/gpgpusim.config
+++ b/configs/tested-cfgs/SM75_RTX2060/gpgpusim.config
@@ -175,5 +175,4 @@
 # tracing functionality
 #-trace_enabled 1
 #-trace_components WARP_SCHEDULER,SCOREBOARD
-#-trace_sampling_core 0
-
+#-trace_sampling_core 0
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_ptx_sim.xml b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_ptx_sim.xml
new file mode 100644
index 0000000..d94d5bd
--- /dev/null
+++ b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_ptx_sim.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="11.44089762" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="21.76302498" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="7.737353491" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.618027871" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.53469516" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="13.9055689" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.313660815" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.053279375" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.079919063" /> <!--Register Writes-->
+		<param name="INT_ACC" value="3.429666768" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.711591276" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.742812382" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.148636575" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.212559571" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.241271438" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.59034036" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.212555149" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.702043615" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.282564496" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="2.485" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.212559047" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.02772" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.0336" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.00924" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.046834662" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.670605032" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="3.269555394" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.18020968" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="83.18977901" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.0257" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.01021" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.02466" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.290770573" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.252598514" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.121706665" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.599926258" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="25.84876211" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_ptx_sim_alt.xml b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_ptx_sim_alt.xml
new file mode 100644
index 0000000..0c6f211
--- /dev/null
+++ b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_ptx_sim_alt.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.827711067" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="8.827711067" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="8.545163843" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.545163843" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="8.545163843" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="8.545163843" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.763326296" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.126123699" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.126123699" /> <!--Register Writes-->
+		<param name="INT_ACC" value="2.851008299" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.723984758" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.723979435" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.119939033" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.147036868" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.234782354" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.594393568" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.147037283" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.920933945" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.18425577" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.656666667" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.147036868" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.03058335" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.03058335" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.03058335" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="2.032318132" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.032318132" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="2.032318132" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.032318132" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="70.15055938" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.01" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.1" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.1" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.235290825" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.250616643" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.327155759" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.992722677" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="26.46013946" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_sass_sim.xml b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_sass_sim.xml
new file mode 100644
index 0000000..570332d
--- /dev/null
+++ b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_sass_sim.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="10" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.661" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.593489331" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="29.735231" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.835033124" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="10.95446778" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.679656761" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="17.67551799" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.1107" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.1233" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="0.779992642" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.100560581" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.140604679" /> <!--Register Writes-->
+		<param name="INT_ACC" value="14.98768151" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.529670751" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.777229051" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.115098047" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.089517055" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.195089274" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.125521663" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.13336307" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.36204415" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.1321288" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.815454621" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.115100088" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.025941068" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.031443719" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.008647023" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.260867526" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.394535301" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="4.124916" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.222707601" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="32.09037703" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.514" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_sass_sim_alt.xml b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_sass_sim_alt.xml
new file mode 100644
index 0000000..9998e96
--- /dev/null
+++ b/configs/tested-cfgs/SM75_RTX2060_S/accelwattch_sass_sim_alt.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="16" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="2" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="9.967097889" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="9.967097889" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.382262155" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="9.382262155" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="9.382262155" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="9.382262155" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.5" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.5" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.045696662" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.096144789" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.134430479" /> <!--Register Writes-->
+		<param name="INT_ACC" value="18.18093465" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.810674358" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="1.061592439" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.114254558" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.155989373" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.377990392" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.155990168" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.155991536" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.571396061" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.155989896" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.013271823" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.167780179" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.032236806" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.032236806" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.032236806" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.175516289" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="1.175516289" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="1.175516289" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.175516289" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="77.25" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.4" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM75_RTX2060_S/config_turing_islip.icnt b/configs/tested-cfgs/SM75_RTX2060_S/config_turing_islip.icnt
new file mode 100644
index 0000000..eed1c34
--- /dev/null
+++ b/configs/tested-cfgs/SM75_RTX2060_S/config_turing_islip.icnt
@@ -0,0 +1,73 @@
+//52*1 fly with 32 flits per packet under gpgpusim injection mode
+use_map = 0;
+flit_size = 40; 
+
+// currently we do not use this, see subnets below
+network_count = 2;
+
+// Topology
+topology = fly;
+k = 52;
+n = 1;
+
+// Routing
+
+routing_function = dest_tag;
+
+// Flow control
+
+num_vcs     = 1;
+vc_buf_size = 64;
+input_buffer_size = 256;
+ejection_buffer_size = 64;
+boundary_buffer_size = 64;
+
+wait_for_tail_credit = 0;
+
+// Router architecture
+
+vc_allocator = islip; //separable_input_first;
+sw_allocator = islip; //separable_input_first;
+alloc_iters  = 1;
+
+credit_delay   = 0;
+routing_delay  = 0;
+vc_alloc_delay = 1;
+sw_alloc_delay = 1;
+
+input_speedup     = 1;
+output_speedup    = 1;
+internal_speedup  = 2.0;
+
+// Traffic, GPGPU-Sim does not use this
+
+traffic                = uniform;
+packet_size ={{1,2,3,4},{10,20}};
+packet_size_rate={{1,1,1,1},{2,1}};
+
+// Simulation - Don't change
+
+sim_type       = gpgpusim;
+//sim_type = latency;
+injection_rate = 0.1;
+
+subnets = 2;
+
+// Always use read and write no matter following line
+//use_read_write = 1;
+
+
+read_request_subnet = 0;
+read_reply_subnet = 1;
+write_request_subnet = 0;
+write_reply_subnet = 1;
+
+read_request_begin_vc = 0;
+read_request_end_vc = 0;
+write_request_begin_vc = 0;
+write_request_end_vc = 0;
+read_reply_begin_vc = 0;
+read_reply_end_vc = 0;
+write_reply_begin_vc = 0;
+write_reply_end_vc = 0;
+
diff --git a/configs/tested-cfgs/SM75_RTX2060_S/gpgpusim.config b/configs/tested-cfgs/SM75_RTX2060_S/gpgpusim.config
new file mode 100644
index 0000000..0fb4742
--- /dev/null
+++ b/configs/tested-cfgs/SM75_RTX2060_S/gpgpusim.config
@@ -0,0 +1,210 @@
+# Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+# Northwestern University, Purdue University, The University of British Columbia
+# All rights reserved.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer;
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution;
+# 3. Neither the names of Northwestern University, Purdue University,
+#    The University of British Columbia nor the names of their contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+# This config models the Turing RTX 2060 Super
+# For more info about turing architecture:
+# 1- https://www.nvidia.com/content/dam/en-zz/Solutions/design-visualization/technologies/turing-architecture/NVIDIA-Turing-Architecture-Whitepaper.pdf
+# 2- "RTX on—The NVIDIA Turing GPU", IEEE MICRO 2020
+
+# functional simulator specification
+-gpgpu_ptx_instruction_classification 0
+-gpgpu_ptx_sim_mode 0
+-gpgpu_ptx_force_max_capability 75
+
+# Device Limits
+-gpgpu_stack_size_limit 1024
+-gpgpu_heap_size_limit 8388608
+-gpgpu_runtime_sync_depth_limit 2
+-gpgpu_runtime_pending_launch_count_limit 2048
+-gpgpu_kernel_launch_latency 5000
+
+# Compute Capability
+-gpgpu_compute_capability_major 7
+-gpgpu_compute_capability_minor 5
+
+# PTX execution-driven
+-gpgpu_ptx_convert_to_ptxplus 0
+-gpgpu_ptx_save_converted_ptxplus 0
+
+# high level architecture configuration
+-gpgpu_n_clusters 34
+-gpgpu_n_cores_per_cluster 1
+-gpgpu_n_mem 16
+-gpgpu_n_sub_partition_per_mchannel 2 
+-gpgpu_clock_gated_lanes 1
+
+# volta clock domains
+#-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock>
+-gpgpu_clock_domains 1905.0:1905.0:1905.0:3500.0
+# boost mode
+# -gpgpu_clock_domains 1680.0:1680.0:1680.0:3500.0
+
+# shader core pipeline config
+-gpgpu_shader_registers 65536
+-gpgpu_registers_per_block 65536
+-gpgpu_occupancy_sm_number 75
+
+# This implies a maximum of 32 warps/SM
+-gpgpu_shader_core_pipeline 1024:32 
+-gpgpu_shader_cta 32
+-gpgpu_simd_model 1
+
+# Pipeline widths and number of FUs
+# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB,ID_OC_TENSOR_CORE,OC_EX_TENSOR_CORE
+## Turing has 4 SP SIMD units, 4 INT units, 4 SFU units, 8 Tensor core units
+## We need to scale the number of pipeline registers to be equal to the number of SP units
+-gpgpu_pipeline_widths 4,0,4,4,4,4,0,4,4,4,8,4,4
+-gpgpu_num_sp_units 4
+-gpgpu_num_sfu_units 4
+-gpgpu_num_int_units 4
+-gpgpu_tensor_core_avail 1
+-gpgpu_num_tensor_core_units 4
+
+# Instruction latencies and initiation intervals
+# "ADD,MAX,MUL,MAD,DIV"
+# All Div operations are executed on SFU unit
+-ptx_opcode_latency_int 4,13,4,5,145,32
+-ptx_opcode_initiation_int 2,2,2,2,8,4
+-ptx_opcode_latency_fp 4,13,4,5,39
+-ptx_opcode_initiation_fp 2,2,2,2,4
+-ptx_opcode_latency_dp 8,19,8,8,330
+-ptx_opcode_initiation_dp 4,4,4,4,130
+-ptx_opcode_latency_sfu 100
+-ptx_opcode_initiation_sfu 8
+-ptx_opcode_latency_tesnor 64
+-ptx_opcode_initiation_tensor 64
+
+# Turing has four schedulers per core
+-gpgpu_num_sched_per_core 4
+# Greedy then oldest scheduler
+-gpgpu_scheduler lrr
+## In Turing, a warp scheduler can issue 1 inst per cycle
+-gpgpu_max_insn_issue_per_warp 1
+-gpgpu_dual_issue_diff_exec_units 1
+
+# shared memory bankconflict detection 
+-gpgpu_shmem_num_banks 32
+-gpgpu_shmem_limited_broadcast 0
+-gpgpu_shmem_warp_parts 1
+-gpgpu_coalesce_arch 75
+
+# Trung has sub core model, in which each scheduler has its own register file and EUs
+# i.e. schedulers are isolated
+-gpgpu_sub_core_model 1
+# disable specialized operand collectors and use generic operand collectors instead
+-gpgpu_enable_specialized_operand_collector 0
+-gpgpu_operand_collector_num_units_gen 8
+-gpgpu_operand_collector_num_in_ports_gen 8
+-gpgpu_operand_collector_num_out_ports_gen 8
+# turing has 8 banks dual-port, 4 schedulers, two banks per scheduler
+# we increase #banks to 16 to mitigate the effect of Regisrer File Cache (RFC) which we do not implement in the current version
+-gpgpu_num_reg_banks 16
+-gpgpu_reg_file_port_throughput 2
+
+# <nsets>:<bsize>:<assoc>,<rep>:<wr>:<alloc>:<wr_alloc>:<set_index_fn>,<mshr>:<N>:<merge>,<mq>:**<fifo_entry>
+# ** Optional parameter - Required when mshr_type==Texture Fifo
+-gpgpu_adaptive_cache_config 0
+-gpgpu_l1_banks 4
+-gpgpu_cache:dl1  S:1:128:512,L:L:s:N:L,A:256:8,16:0,32
+-gpgpu_shmem_size 65536
+-gpgpu_shmem_sizeDefault 65536
+-gpgpu_shmem_per_block 65536
+-gpgpu_gmem_skip_L1D 0
+-gpgpu_n_cluster_ejection_buffer_size 32
+-gpgpu_l1_latency 20
+-gpgpu_smem_latency 20
+-gpgpu_flush_l1_cache 1
+
+# 64 sets, each 128 bytes 16-way for each memory sub partition (128 KB per memory sub partition). This gives us 4MB L2 cache
+-gpgpu_cache:dl2 S:64:128:16,L:B:m:L:P,A:192:4,32:0,32
+-gpgpu_cache:dl2_texture_only 0
+-gpgpu_dram_partition_queues 64:64:64:64
+-gpgpu_perf_sim_memcpy 1
+-gpgpu_memory_partition_indexing 0
+
+# 128 KB Inst.
+-gpgpu_cache:il1 N:64:128:16,L:R:f:N:L,S:2:48,4
+-gpgpu_inst_fetch_throughput 4
+# 128 KB Tex
+# Note, TEX is deprected in Volta, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod
+-gpgpu_tex_cache:l1 N:4:128:256,L:R:m:N:L,T:512:8,128:2
+# 64 KB Const
+-gpgpu_const_cache:l1 N:128:64:8,L:R:f:N:L,S:2:64,4
+-gpgpu_perfect_inst_const_cache 1
+
+# interconnection
+#-network_mode 1 
+#-inter_config_file config_turing_islip.icnt
+# use built-in local xbar
+-network_mode 2
+-icnt_in_buffer_limit 512
+-icnt_out_buffer_limit 512
+-icnt_subnets 2
+-icnt_arbiter_algo 1
+-icnt_flit_size 40
+
+# memory partition latency config 
+-gpgpu_l2_rop_latency 160
+-dram_latency 100
+
+# dram model config
+-gpgpu_dram_scheduler 1
+-gpgpu_frfcfs_dram_sched_queue_size 64
+-gpgpu_dram_return_queue_size 192
+
+# Turing has GDDR6
+# http://monitorinsider.com/GDDR6.html
+-gpgpu_n_mem_per_ctrlr 1
+-gpgpu_dram_buswidth 2
+-gpgpu_dram_burst_length 16
+-dram_data_command_freq_ratio 4
+-gpgpu_mem_address_mask 1
+-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS
+
+# Use the same GDDR5 timing, scaled to 3500MHZ
+-gpgpu_dram_timing_opt "nbk=16:CCD=4:RRD=10:RCD=20:RAS=50:RP=20:RC=62:
+                        CL=20:WL=8:CDLR=9:WR=20:nbkgrp=4:CCDL=4:RTPL=4"
+
+# select lower bits for bnkgrp to increase bnkgrp parallelism
+-dram_bnk_indexing_policy 0
+-dram_bnkgrp_indexing_policy 1
+
+#-dram_seperate_write_queue_enable 1
+#-dram_write_queue_size 64:56:32
+
+# stat collection
+-gpgpu_memlatency_stat 14 
+-gpgpu_runtime_stat 500
+-enable_ptx_file_line_stats 1
+-visualizer_enabled 0
+
+# tracing functionality
+#-trace_enabled 1
+#-trace_components WARP_SCHEDULER,SCOREBOARD
+#-trace_sampling_core 0
diff --git a/configs/tested-cfgs/SM7_QV100/accelwattch_ptx_sim.xml b/configs/tested-cfgs/SM7_QV100/accelwattch_ptx_sim.xml
new file mode 100644
index 0000000..d94d5bd
--- /dev/null
+++ b/configs/tested-cfgs/SM7_QV100/accelwattch_ptx_sim.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="11.44089762" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="21.76302498" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="7.737353491" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.618027871" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.53469516" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="13.9055689" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.313660815" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.053279375" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.079919063" /> <!--Register Writes-->
+		<param name="INT_ACC" value="3.429666768" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.711591276" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.742812382" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.148636575" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.212559571" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.241271438" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.59034036" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.212555149" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.702043615" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.282564496" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="2.485" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.212559047" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.02772" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.0336" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.00924" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.046834662" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.670605032" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="3.269555394" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.18020968" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="83.18977901" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.0257" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.01021" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.02466" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.290770573" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.252598514" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.121706665" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.599926258" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="25.84876211" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_QV100/accelwattch_ptx_sim_alt.xml b/configs/tested-cfgs/SM7_QV100/accelwattch_ptx_sim_alt.xml
new file mode 100644
index 0000000..0c6f211
--- /dev/null
+++ b/configs/tested-cfgs/SM7_QV100/accelwattch_ptx_sim_alt.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.827711067" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="8.827711067" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="8.545163843" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.545163843" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="8.545163843" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="8.545163843" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.763326296" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.126123699" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.126123699" /> <!--Register Writes-->
+		<param name="INT_ACC" value="2.851008299" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.723984758" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.723979435" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.119939033" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.147036868" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.234782354" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.594393568" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.147037283" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.920933945" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.18425577" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.656666667" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.147036868" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.03058335" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.03058335" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.03058335" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="2.032318132" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.032318132" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="2.032318132" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.032318132" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="70.15055938" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.01" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.1" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.1" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.235290825" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.250616643" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.327155759" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.992722677" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="26.46013946" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_QV100/accelwattch_sass_hw.xml b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_hw.xml
new file mode 100644
index 0000000..64f89d6
--- /dev/null
+++ b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_hw.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="100" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="43.5416637" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="0" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="0" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="7.193244877" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.01198819" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.497094158" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="12.9276971" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="9.322047" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="10.383093" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="4.146674883" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0" /> <!--Register Reads-->
+		<param name="REG_WR" value="0" /> <!--Register Writes-->
+		<param name="INT_ACC" value="3.350646078" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.041043127" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.077722905" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.147866461" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.147864271" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.48526506" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.147864519" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.376510619" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.147862451" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.147865348" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.148632914" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="3.4530026" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.020752854" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.025154975" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.006917618" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="3.430442278" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="6.514812193" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="11.22265896" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="3.32662057" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="87.30828879" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="1.028" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_QV100/accelwattch_sass_hybrid.xml b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_hybrid.xml
new file mode 100644
index 0000000..175f1fd
--- /dev/null
+++ b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_hybrid.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="100" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="48.259994" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="0" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="0" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="6.607568654" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="7.359649633" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.456620598" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="11.87512" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="5.932232271" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="6.607445701" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="5.116439734" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0" /> <!--Register Reads-->
+		<param name="REG_WR" value="0" /> <!--Register Writes-->
+		<param name="INT_ACC" value="7.725550311" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.201142468" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.201146878" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.130624774" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.130623287" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.195089274" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.130617842" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.202205086" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.130621909" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.130622532" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.240811904" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="3.453002628" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.01527021" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.018509345" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.00509007" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="3.391355385" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="6.440581599" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="11.09478657" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="3.288716634" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="86.3134871" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.514" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_QV100/accelwattch_sass_sim.xml b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_sim.xml
new file mode 100644
index 0000000..570332d
--- /dev/null
+++ b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_sim.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="10" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.661" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.593489331" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="29.735231" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.835033124" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="10.95446778" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.679656761" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="17.67551799" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.1107" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.1233" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="0.779992642" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.100560581" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.140604679" /> <!--Register Writes-->
+		<param name="INT_ACC" value="14.98768151" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.529670751" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.777229051" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.115098047" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.089517055" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.195089274" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.125521663" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.13336307" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.36204415" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.1321288" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.815454621" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.115100088" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.025941068" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.031443719" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.008647023" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.260867526" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.394535301" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="4.124916" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.222707601" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="32.09037703" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.514" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_QV100/accelwattch_sass_sim_alt.xml b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_sim_alt.xml
new file mode 100644
index 0000000..9998e96
--- /dev/null
+++ b/configs/tested-cfgs/SM7_QV100/accelwattch_sass_sim_alt.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="16" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="2" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="9.967097889" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="9.967097889" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.382262155" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="9.382262155" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="9.382262155" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="9.382262155" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.5" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.5" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.045696662" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.096144789" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.134430479" /> <!--Register Writes-->
+		<param name="INT_ACC" value="18.18093465" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.810674358" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="1.061592439" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.114254558" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.155989373" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.377990392" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.155990168" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.155991536" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.571396061" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.155989896" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.013271823" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.167780179" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.032236806" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.032236806" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.032236806" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.175516289" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="1.175516289" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="1.175516289" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.175516289" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="77.25" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.4" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_QV100/gpgpusim.config b/configs/tested-cfgs/SM7_QV100/gpgpusim.config
index 425bc16..76c99b7 100644
--- a/configs/tested-cfgs/SM7_QV100/gpgpusim.config
+++ b/configs/tested-cfgs/SM7_QV100/gpgpusim.config
@@ -1,4 +1,34 @@
-# This config models the Volta
+# Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+# Northwestern University, Purdue University, The University of British Columbia
+# All rights reserved.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer;
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution;
+# 3. Neither the names of Northwestern University, Purdue University,
+#    The University of British Columbia nor the names of their contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+
+# This config models the Volta Quadro V100
 # For more info about volta architecture:
 # http://images.nvidia.com/content/volta-architecture/pdf/volta-architecture-whitepaper.pdf
 # https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8344474&tag=1# 
@@ -34,10 +64,11 @@
 -gpgpu_n_cores_per_cluster 1
 -gpgpu_n_mem 32
 -gpgpu_n_sub_partition_per_mchannel 2 
+-gpgpu_clock_gated_lanes 1
 
 # volta clock domains
 #-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock>
--gpgpu_clock_domains 1132.0:1132.0:1132.0:850.0
+-gpgpu_clock_domains 1447.0:1447.0:1447.0:850.0
 # boost mode
 # -gpgpu_clock_domains 1628.0:1628.0:1628.0:850.0
 
@@ -199,9 +230,6 @@
 -enable_ptx_file_line_stats 1
 -visualizer_enabled 0
 
-# power model configs, disable it untill we create a real energy model for Volta
--power_simulation_enabled 0
-
 # tracing functionality
 #-trace_enabled 1
 #-trace_components WARP_SCHEDULER,SCOREBOARD
diff --git a/configs/tested-cfgs/SM7_TITANV/accelwattch_ptx_sim.xml b/configs/tested-cfgs/SM7_TITANV/accelwattch_ptx_sim.xml
new file mode 100644
index 0000000..d94d5bd
--- /dev/null
+++ b/configs/tested-cfgs/SM7_TITANV/accelwattch_ptx_sim.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="11.44089762" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="21.76302498" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="7.737353491" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.618027871" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.53469516" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="13.9055689" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.313660815" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.053279375" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.079919063" /> <!--Register Writes-->
+		<param name="INT_ACC" value="3.429666768" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.711591276" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.742812382" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.148636575" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.212559571" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.241271438" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.59034036" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.212555149" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.702043615" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.282564496" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="2.485" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.212559047" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.02772" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.0336" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.00924" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.046834662" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.670605032" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="3.269555394" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.18020968" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="83.18977901" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.0257" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.01021" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.02466" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.290770573" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.252598514" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.121706665" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.599926258" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="25.84876211" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_TITANV/accelwattch_ptx_sim_alt.xml b/configs/tested-cfgs/SM7_TITANV/accelwattch_ptx_sim_alt.xml
new file mode 100644
index 0000000..0c6f211
--- /dev/null
+++ b/configs/tested-cfgs/SM7_TITANV/accelwattch_ptx_sim_alt.xml
@@ -0,0 +1,623 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="2" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.57" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.827711067" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="8.827711067" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="8.545163843" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.545163843" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="8.545163843" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="8.545163843" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.65916315" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.73418985" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.763326296" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.126123699" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.126123699" /> <!--Register Writes-->
+		<param name="INT_ACC" value="2.851008299" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.723984758" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.723979435" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.119939033" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.147036868" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="1.234782354" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.594393568" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.147037283" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.920933945" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.18425577" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.656666667" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.147036868" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.03058335" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.03058335" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.03058335" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="2.032318132" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.032318132" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="2.032318132" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="2.032318132" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="70.15055938" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.01" /> <!--Pipeline Accesses-->
+
+		<!-- PTX Model specific DYNAMIC Power Activity Factors-->
+
+		<param name="TC_H" value="0.1" /> <!--Texture Cache Hits-->
+		<param name="TC_M" value="0.1" /> <!--Texture Cache Misses-->
+		<param name="INT_MUL24_ACC" value="0.235290825" /> <!--Integer 24-bit MUL Accesses-->
+		<param name="INT_MUL32_ACC" value="0.250616643" /> <!--Integer 32-bit MUL Accesses-->
+		<param name="INT_DIV_ACC" value="5.327155759" /> <!--Integer DIV Accesses-->
+		<param name="FP_DIV_ACC" value="4.992722677" /> <!--FP DIV Accesses-->
+		<param name="DP_DIV_ACC" value="26.46013946" /> <!--DP DIV Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_hw.xml b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_hw.xml
new file mode 100644
index 0000000..64f89d6
--- /dev/null
+++ b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_hw.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="100" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="43.5416637" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="0" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="0" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="7.193244877" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="8.01198819" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.497094158" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="12.9276971" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="9.322047" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="10.383093" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="4.146674883" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0" /> <!--Register Reads-->
+		<param name="REG_WR" value="0" /> <!--Register Writes-->
+		<param name="INT_ACC" value="3.350646078" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.041043127" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.077722905" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.147866461" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.147864271" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.48526506" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.147864519" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.376510619" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.147862451" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.147865348" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.148632914" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="3.4530026" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.020752854" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.025154975" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.006917618" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="3.430442278" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="6.514812193" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="11.22265896" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="3.32662057" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="87.30828879" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="1.028" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_hybrid.xml b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_hybrid.xml
new file mode 100644
index 0000000..175f1fd
--- /dev/null
+++ b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_hybrid.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="100" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="48.259994" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="0" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="0" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="6.607568654" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="7.359649633" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.456620598" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="11.87512" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="5.932232271" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="6.607445701" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="5.116439734" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0" /> <!--Register Reads-->
+		<param name="REG_WR" value="0" /> <!--Register Writes-->
+		<param name="INT_ACC" value="7.725550311" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.201142468" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.201146878" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.130624774" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.130623287" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.195089274" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.130617842" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.202205086" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.130621909" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.130622532" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.240811904" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="3.453002628" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.01527021" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.018509345" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.00509007" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="3.391355385" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="6.440581599" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="11.09478657" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="3.288716634" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="86.3134871" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.514" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_sim.xml b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_sim.xml
new file mode 100644
index 0000000..570332d
--- /dev/null
+++ b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_sim.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="10" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="4.661" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="8.593489331" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="29.735231" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.835033124" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="10.95446778" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="0.679656761" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="17.67551799" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.1107" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.1233" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="0.779992642" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.100560581" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.140604679" /> <!--Register Writes-->
+		<param name="INT_ACC" value="14.98768151" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.529670751" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="0.777229051" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.115098047" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.089517055" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.195089274" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.125521663" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.13336307" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.36204415" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.1321288" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="0.815454621" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.115100088" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.025941068" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.031443719" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.008647023" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.260867526" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="2.394535301" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="4.124916" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.222707601" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="32.09037703" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.514" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_sim_alt.xml b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_sim_alt.xml
new file mode 100644
index 0000000..9998e96
--- /dev/null
+++ b/configs/tested-cfgs/SM7_TITANV/accelwattch_sass_sim_alt.xml
@@ -0,0 +1,613 @@
+<?xml version="1.0" ?>
+<component id="root" name="root">
+	<component id="system" name="system">
+<!-- Copyright (c) 2018-2021, Vijay Kandiah, Junrui Pan, Mahmoud Khairy, Scott Peverelle, Timothy Rogers, Tor M. Aamodt, Nikos Hardavellas
+Northwestern University, Purdue University, The University of British Columbia
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of Northwestern University, Purdue University,
+   The University of British Columbia nor the names of their contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE. -->
+
+		<!-- DYNAMIC Power Activity Factors -->
+
+		<param name="TOT_INST" value="16" /> <!--Instruction Buffer Activity Factor(Total Warp Instructions)-->
+		<param name="FP_INT" value="2" /> <!--Scheduler Activity Factor(Non-Memory Warp Instructons)-->
+		<param name="IC_H" value="9.967097889" /> <!--Instruction Cache Hits -->
+		<param name="IC_M" value="9.967097889" /> <!--Instruction Cache Misses-->
+		<param name="DC_RH" value="9.382262155" /> <!--L1 Data Cache Read Hits--> 
+		<param name="DC_RM" value="9.382262155" /> <!--L1 Data Cache Read Misses-->
+		<param name="DC_WH" value="9.382262155" /> <!--L1 Data Cache Write Hits-->
+		<param name="DC_WM" value="9.382262155" /> <!--L1 Data Cache Write Misses-->
+		<param name="CC_H" value="0.5" /> <!--Constant Cache Hits-->
+		<param name="CC_M" value="0.5" /> <!--Constant Cache Misses-->
+		<param name="SHRD_ACC" value="1.045696662" /> <!--Shared Memory Accesses-->
+		<param name="REG_RD" value="0.096144789" /> <!--Register Reads-->
+		<param name="REG_WR" value="0.134430479" /> <!--Register Writes-->
+		<param name="INT_ACC" value="18.18093465" /> <!--Integer ALU Accesses-->
+		<param name="FP_ACC" value="0.810674358" /> <!--FPU Accesses-->
+		<param name="DP_ACC" value="1.061592439" /> <!--Integer Accesses-->
+		<param name="INT_MUL_ACC" value="0.114254558" /> <!--Integer MUL Accesses-->
+		<param name="FP_MUL_ACC" value="0.155989373" /> <!--FP MUL Accesses-->
+		<param name="FP_SQRT_ACC" value="0.377990392" /> <!--SFU: sqrt Accesses-->
+		<param name="FP_LG_ACC" value="0.155990168" /> <!--SFU: log Accesses-->
+		<param name="FP_SIN_ACC" value="0.155991536" /> <!--SFU: sin/cos Accesses-->
+		<param name="FP_EXP_ACC" value="0.571396061" /> <!--SFU: exponent Accesses-->
+		<param name="DP_MUL_ACC" value="0.155989896" /> <!--DP MUL Accesses-->
+		<param name="TENSOR_ACC" value="1.013271823" /> <!--Tensor Accesses-->
+		<param name="TEX_ACC" value="0.167780179" /> <!--Texture Unit Accesses-->
+		<param name="MEM_RD" value="0.032236806" /> <!--DRAM Reads-->
+		<param name="MEM_WR" value="0.032236806" /> <!--DRAM Writes-->
+		<param name="MEM_PRE" value="0.032236806" /> <!--DRAM Precharge-->
+		<param name="L2_RH" value="1.175516289" /> <!--L2 Data Cache Read Hits--> 
+		<param name="L2_RM" value="1.175516289" /> <!--L2 Data Cache Read Misses-->
+		<param name="L2_WH" value="1.175516289" /> <!--L2 Data Cache Write Hits-->
+		<param name="L2_WM" value="1.175516289" /> <!--L2 Data Cache Write Misses-->
+		<param name="NOC_A" value="77.25" /> <!--Interconnect Network Accesses-->
+		<param name="PIPE_A" value="0.4" /> <!--Pipeline Accesses-->
+
+		<!-- STATIC & CONSTANT Power -->
+
+		<param name="constant_power" value="32.32522272" /> <!--Constant power-->
+		<param name="idle_core_power" value="0.28279166"/> <!--Idle SM power-->
+
+		<param name="static_cat1_flane" value="15.29035866"/> <!--INT (ADD+MUL) First Lane Activation Power-->
+		<param name="static_cat1_addlane" value="0.586233603"/> <!--INT (ADD+MUL) Additional Lane Activation Power-->
+
+		<param name="static_cat2_flane" value="18.6179906"/> <!--INT+FP First Lane Activation Power-->
+		<param name="static_cat2_addlane" value="0.645228013"/> <!--INT+FP Additional Lane Activation Power-->
+
+		<param name="static_cat3_flane" value="19.10017723"/> <!--INT+FP+DP First Lane Activation Power-->
+		<param name="static_cat3_addlane" value="0.726863055"/> <!--INT+FP+DP Additional Lane Activation Power-->
+
+		<param name="static_cat4_flane" value="18.55029744"/> <!--INT+FP+SFU First Lane Activation Power-->
+		<param name="static_cat4_addlane" value="0.6099397"/> <!--INT+FP+SFU Additional Lane Activation Power-->
+
+		<param name="static_cat5_flane" value="14.74826681"/> <!--INT+FP+TEX First Lane Activation Power-->
+		<param name="static_cat5_addlane" value="0.514367937"/> <!--INT+FP+TEX Additional Lane Activation Power-->
+
+		<param name="static_cat6_flane" value="48.94875596"/> <!--INT+FP+TENSOR First Lane Activation Power-->
+		<param name="static_cat6_addlane" value="0.0"/> <!--INT+FP+TENSOR Additional Lane Activation Power-->
+
+		<param name="static_light_flane" value="1.965373811"/> <!--LIGHT_SM First Lane Activation Power-->
+		<param name="static_light_addlane" value="0.003966868"/> <!--LIGHT_SM Additional Lane Activation Power-->
+
+		<param name="static_intadd_flane" value="19.70468506"/> <!--INT ADD First Lane Activation Power-->
+		<param name="static_intadd_addlane" value="0.388578623"/> <!--INT ADD Additional Lane Activation Power-->
+
+		<param name="static_intmul_flane" value="16.64811823"/> <!--INT MUL First Lane Activation Power-->
+		<param name="static_intmul_addlane" value="0.281803166"/> <!--INT MUL Additional Lane Activation Power-->
+
+		<param name="static_geomean_flane" value="17.21745077"/> <!--GEOMEAN First Lane Activation Power-->
+		<param name="static_geomean_addlane" value="0.650630555"/> <!--GEOMEAN Additional Lane Activation Power-->		
+		<param name="static_shared_flane" value="31.40965691"/> <!--Shared Memory First Lane Activation Power-->
+		<param name="static_l1_flane" value="34.79491352"/> <!--L1D First Lane Activation Power-->
+		<param name="static_l2_flane" value="17.30654755"/> <!--L2D ADD+MUL First Lane Activation Power-->
+
+
+		<!-- LEAVE BELOW UNCHANGED! These are parameters used for initial GPUWattch model left untouched -->
+
+
+		<param name="GPU_Architecture" value="1"/><!-- 0-G80; 1-Fermi; others not supported -->
+		<param name="architecture" value="1"/> <!-- fermi:1 quadro:2 other: undefined-->
+		<param name="number_of_L1Directories" value="0"/>
+		<param name="number_of_L2Directories" value="0"/>
+		<param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
+		<param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
+		<param name="number_of_NoCs" value="1"/> 
+		<param name="homogeneous_cores" value="1"/><!--1 means homo -->
+		<param name="homogeneous_L2s" value="1"/>
+		<param name="homogeneous_L1Directorys" value="1"/>
+		<param name="homogeneous_L2Directorys" value="1"/>
+		<param name="homogeneous_L3s" value="1"/>
+		<param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
+		<param name="homogeneous_NoCs" value="1"/>
+		<param name="core_tech_node" value="23"/><!-- nm -->
+
+		<param name="number_cache_levels" value="2"/>
+		<param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
+		<param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
+		<param name="longer_channel_device" value="1"/><!-- 0 no use; 1 use when possible -->
+		<param name="machine_bits" value="32"/>
+		<param name="virtual_address_width" value="32"/>
+		<param name="physical_address_width" value="32"/>
+		<param name="virtual_memory_page_size" value="4096"/>
+
+		<param name="IDLE_CORE_N" value="1"/>
+		<stat name="num_idle_cores" value="0"/><!-- Average Number of idle cores during this period -->
+		<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		<stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		<stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
+			virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
+		<!-- *********************** cores ******************* -->
+		<component id="system.core0" name="core0">
+			<!-- Core property -->
+			<param name="clock_rate" value="700"/>
+			<param name="instruction_length" value="32"/>
+			<param name="opcode_width" value="9"/>
+			<!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
+			default value is machine_bits, if not set --> 
+			<param name="machine_type" value="1"/><!-- 1 inorder; 0 OOO-->
+			<!-- inorder/OoO -->
+			<param name="number_hardware_threads" value="32"/>
+			<!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
+			it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
+			branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
+			<param name="fetch_width" value="1"/>
+			<!-- fetch_width determins the size of cachelines of L1 cache block -->
+			<param name="number_instruction_fetch_ports" value="1"/>
+			<param name="decode_width" value="1"/>
+			<!-- decode_width determins the number of ports of the 
+			renaming table (both RAM and CAM) scheme -->
+			<param name="issue_width" value="2"/>
+			<!-- issue_width determins the number of ports of Issue window and other logic 
+			as in the complexity effective proccessors paper; issue_width==dispatch_width -->
+			<param name="commit_width" value="2"/>
+			<!-- commit_width determins the number of ports of register files -->
+			<param name="fp_issue_width" value="1"/>
+			<param name="prediction_width" value="0"/> 
+			<!-- number of branch instructions can be predicted simultannouesl-->
+			<!-- Current version of McPAT does not distinguish int and floating point pipelines 
+			Theses parameters are reserved for future use.--> 
+			<param name="pipelines_per_core" value="1,1"/>
+			<!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
+			<param name="pipeline_depth" value="8,8"/>
+			<!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
+			<!-- issue and exe unit-->
+			<param name="ALU_per_core" value="32"/>
+			<!-- contains an adder, a shifter, and a logical unit -->
+			<param name="MUL_per_core" value="4"/>
+			<!-- For MUL and Div -->
+			<param name="FPU_per_core" value="32"/>		
+			<!-- buffer between IF and ID stage -->
+			<param name="instruction_buffer_size" value="1"/>
+			<!-- buffer between ID and sche/exe stage -->
+			<param name="decoded_stream_buffer_size" value="1"/>
+			<param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
+			<!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
+			<param name="instruction_window_size" value="1"/>
+			<param name="fp_instruction_window_size" value="1"/>
+			<!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
+			<param name="ROB_size" value="0"/>
+			<!-- each in-flight instruction has an entry in ROB -->
+			<!-- registers -->
+			<!-- SM parameters  Added by Syed Gilani -->
+			<param name="rf_banks" value="32"/>
+			<param name="simd_width" value="32"/>
+			<param name="collector_units" value="32"/>
+			<param name="core_clock_ratio" value="2"/>
+			<param name="warp_size" value="32"/>
+
+			<param name="archi_Regs_IRF_size" value="65536"/>			
+			<param name="archi_Regs_FRF_size" value="32"/>
+			<!--  if OoO processor, phy_reg number is needed for renaming logic, 
+			renaming logic is for both integer and floating point insts.  -->
+			<param name="phy_Regs_IRF_size" value="32"/>
+			<param name="phy_Regs_FRF_size" value="32"/>
+			<!-- rename logic -->
+			<param name="rename_scheme" value="0"/>
+			<!-- can be RAM based(0) or CAM based(1) rename scheme 
+			RAM-based scheme will have free list, status table;
+			CAM-based scheme have the valid bit in the data field of the CAM 
+			both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
+			Detailed RAT Implementation see TR -->
+			<param name="register_windows_size" value="0"/>
+			<!-- how many windows in the windowed register file, sun processors;
+			no register windowing is used when this number is 0 -->
+			<!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
+			They will always try to exeute out-of-order though. -->
+			<param name="LSU_order" value="inorder"/>
+			<param name="store_buffer_size" value="32"/>
+			<!-- By default, in-order cores do not have load buffers -->
+			<param name="load_buffer_size" value="32"/>	
+			<!-- number of ports refer to sustainable concurrent memory accesses --> 
+			<param name="memory_ports" value="2"/>	
+			<!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
+			as well as the ports of Dcache which is connected to LSU -->	
+			<!-- dual-pumped Dcache can be used to save the extra read/write ports -->
+			<param name="RAS_size" value="1"/>						
+			<!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
+			<!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
+			<stat name="total_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="branch_instructions" value="branch_instruction_match_mcpat"/>
+			<stat name="branch_mispredictions" value="0"/>
+			<stat name="load_instructions" value="load_instruction_match_mcpat"/>
+			<stat name="store_instructions" value="store_instruction_match_mcpat"/>
+			<stat name="committed_instructions" value="total_instructions_match_mcpat"/>
+			<stat name="committed_int_instructions" value="int_instruction_match_mcpat"/>
+			<stat name="committed_fp_instructions" value="flt_instruction_match_mcpat"/>
+			<stat name="pipeline_duty_cycle" value="0.6"/><!--<=1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
+			<!-- the following cycle stats are used for heterogeneouse cores only, 
+				please ignore them if homogeneouse cores -->
+			<stat name="total_cycles" value="total_cycles_match_mcpat"/>
+		    <stat name="idle_cycles" value="idle_cycles_match_mcpat"/>
+		    <stat name="busy_cycles"  value="busy_cycles_match_mcpat"/>
+			<!-- instruction buffer stats -->
+			<!-- ROB stats, both RS and Phy based OoOs have ROB
+			performance simulator should capture the difference on accesses,
+			otherwise, McPAT has to guess based on number of commited instructions. -->
+			<stat name="ROB_reads" value="263886"/>
+			<stat name="ROB_writes" value="263886"/>
+			<!-- RAT accesses -->
+			<stat name="rename_accesses" value="263886"/>
+			<stat name="fp_rename_accesses" value="263886"/>
+			<!-- decode and rename stage use this, should be total ic - nop -->
+			<!-- Inst window stats -->
+			<stat name="inst_window_reads" value="263886"/>
+			<stat name="inst_window_writes" value="263886"/>
+			<stat name="inst_window_wakeup_accesses" value="263886"/>
+			<stat name="fp_inst_window_reads" value="263886"/>
+			<stat name="fp_inst_window_writes" value="263886"/>
+			<stat name="fp_inst_window_wakeup_accesses" value="263886"/>
+			<!--  RF accesses -->
+			<stat name="int_regfile_reads" value="int_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_reads" value="int_register_write_access_match_mcpat"/>
+			<stat name="int_regfile_writes" value="float_register_read_access_match_mcpat"/>
+			<stat name="float_regfile_writes" value="float_register_write_access_match_mcpat"/>
+			
+			<!-- The following stat is for operand collector power - Added by Syed -->
+			<stat name="non_rf_operands" value="0"/>
+
+			<!-- accesses to the working reg -->
+			<stat name="function_calls" value="0"/>
+			<stat name="context_switches" value="0"/> <!--not used in the McPAT -->
+			<!-- Number of Windowes switches (number of function calls and returns)-->
+			<!-- Alu stats by default, the processor has one FPU that includes the divider and 
+			 multiplier. The fpu accesses should include accesses to multiplier and divider  -->
+			<stat name="ialu_accesses" value="ialu_accesses_match_mcpat"/>			
+			<stat name="fpu_accesses" value="fpu_accesses_match_mcpat"/>
+			<stat name="mul_accesses" value="mul_accesses_match_mcpat"/>
+			<stat name="cdb_alu_accesses" value="0"/>
+			<stat name="cdb_mul_accesses" value="0"/>
+			<stat name="cdb_fpu_accesses" value="0"/>
+			<!-- multiple cycle accesses should be counted multiple times, 
+			otherwise, McPAT can use internal counter for different floating point instructions 
+			to get final accesses. But that needs detailed info for floating point inst mix -->
+			<!--  currently the performance simulator should 
+			make sure all the numbers are final numbers, 
+			including the explicit read/write accesses, 
+			and the implicite accesses such as replacements and etc.
+			Future versions of McPAT may be able to reason the implicite access
+			based on param and stats of last level cache
+			The same rule applies to all cache access stats too!  -->
+			<!-- following is AF for max power computation. 
+				Do not change them, unless you understand them-->
+			<stat name="IFU_duty_cycle" value="0.25"/>			
+			<stat name="LSU_duty_cycle" value="0.25"/>
+			<stat name="MemManU_I_duty_cycle" value="1"/>
+			<stat name="MemManU_D_duty_cycle" value="0.25"/>
+			<stat name="ALU_duty_cycle" value="0.9"/>
+			<stat name="MUL_duty_cycle" value="0.5"/>
+			<stat name="FPU_duty_cycle" value="1"/><!-- FPU numbers are already average -->
+			<stat name="ALU_cdb_duty_cycle" value="0.9"/>
+			<stat name="MUL_cdb_duty_cycle" value="0.5"/>
+			<stat name="FPU_cdb_duty_cycle" value="15"/>	
+			<component id="system.core0.predictor" name="PBT">
+				<!-- branch predictor; tournament predictor see Alpha implementation -->
+				<param name="local_predictor_size" value="10,3"/>
+				<param name="local_predictor_entries" value="1024"/>
+				<param name="global_predictor_entries" value="4096"/>
+				<param name="global_predictor_bits" value="2"/>
+				<param name="chooser_predictor_entries" value="4096"/>
+				<param name="chooser_predictor_bits" value="2"/>
+				<!-- These parameters can be combined like below in next version
+				<param name="load_predictor" value="10,3,1024"/>
+				<param name="global_predictor" value="4096,2"/>
+				<param name="predictor_chooser" value="4096,2"/>
+				-->
+			</component>
+			<component id="system.core0.itlb" name="itlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+				<!-- there is no write requests to itlb although writes happen to itlb after miss, 
+				which is actually a replacement -->
+			</component>
+			<component id="system.core0.icache" name="icache">
+				<!-- there is no write requests to itlb although writes happen to it after miss, 
+				which is actually a replacement -->
+				<param name="icache_config" value="16384,128,4,1,1,3,8,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
+				<param name="buffer_sizes" value="16, 16, 16,0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
+				<stat name="read_accesses" value="total_instructions_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="conflicts" value="0"/>				
+			</component>
+			<component id="system.core0.dtlb" name="dtlb">
+				<param name="number_entries" value="1"/>
+				<stat name="total_accesses" value="0"/>
+				<stat name="total_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.ccache" name="ccache">
+			        <!-- all the buffer related are optional -->
+				<param name="ccache_config" value="16384,64,2,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="ccache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="ccache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.tcache" name="tcache">
+			        <!-- all the buffer related are optional -->
+				<param name="tcache_config" value="49152,128,8,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="tcache_read_accesses_match_mcpat"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="tcache_read_misses_match_mcpat"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+      <!--model the shared memory by mimicing dcache-->
+			<component id="system.core0.sharedmemory" name="sharedmemory">
+			        <!-- all the buffer related are optional -->
+				<param name="sharedmemory_config" value="98304,16,1,16,1,3,16,0"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="sharedmemory_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="sharedmemory_write_access_match_mcpat"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.dcache" name="dcache">
+			        <!-- all the buffer related are optional -->
+				<param name="dcache_config" value="16384,32,4,1,1,3,8,0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 0"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="dcache_read_access_match_mcpat"/>
+				<stat name="write_accesses" value="dcache_write_access_match_mcpat"/>
+				<stat name="read_misses" value="dcache_read_miss_match_mcpat"/>
+				<stat name="write_misses" value="dcache_write_miss_match_mcpat"/>
+				<stat name="conflicts" value="0"/>	
+			</component>
+			<component id="system.core0.BTB" name="BTB">
+			        <!-- all the buffer related are optional -->
+				<param name="BTB_config" value="8192,4,2,1, 1,3"/>
+				<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			</component>
+	</component>
+		<component id="system.L1Directory0" name="L1Directory0">
+				<param name="Directory_type" value="0"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="2048,1,0,1, 4, 4,8"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="800000"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="20"/>	
+				<stat name="duty_cycle" value="0.45"/>	
+		</component>
+		<component id="system.L2Directory0" name="L2Directory0">
+				<param name="Directory_type" value="1"/>
+			    <!--0 cam based shadowed tag. 1 directory cache -->	
+				<param name="Dir_config" value="1048576,16,16,1,2, 100"/>
+				<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
+			    <param name="buffer_sizes" value="8, 8, 8, 8"/>	
+				<!-- all the buffer related are optional -->
+			    <param name="clockrate" value="1400"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw search ports -->
+				<param name="device_type" value="0"/>
+				<!-- altough there are multiple access types, 
+				Performance simulator needs to cast them into reads or writes
+				e.g. the invalidates can be considered as writes -->
+				<stat name="read_accesses" value="0"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>
+			    <stat name="duty_cycle" value="0.45"/>		
+		</component>
+		<component id="system.L20" name="L20">
+			<!-- all the buffer related are optional -->
+				<param name="L2_config" value="131072,128,16,1, 4,23, 64, 1"/>
+			    <!-- consider 4-way bank interleaving for Niagara 1 -->
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<param name="clockrate" value="2962"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<stat name="read_accesses" value="200000"/>
+				<stat name="write_accesses" value="0"/>
+				<stat name="read_misses" value="0"/>
+				<stat name="write_misses" value="0"/>
+				<stat name="conflicts" value="0"/>	
+			    <stat name="duty_cycle" value="0.5"/>	
+		</component>
+		
+<!--**********************************************************************-->
+<component id="system.L30" name="L30">
+				<param name="L3_config" value="1048576,64,16,1, 2,100, 64,1"/>
+				<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
+				<param name="clockrate" value="3500"/>
+				<param name="ports" value="1,1,1"/>
+				<!-- number of r, w, and rw ports -->
+				<param name="device_type" value="0"/>
+				<param name="buffer_sizes" value="16, 16, 16, 16"/>
+				<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
+				<stat name="read_accesses" value="58824"/>
+				<stat name="write_accesses" value="27276"/>
+				<stat name="read_misses" value="1632"/>
+				<stat name="write_misses" value="183"/>
+				<stat name="conflicts" value="0"/>	
+	            <stat name="duty_cycle" value="0.35"/>	
+		</component>
+
+
+<!--**********************************************************************-->
+		<component id="system.NoC0" name="noc0">
+			<param name="clockrate" value="700"/>
+			<param name="type" value="1"/>
+			<!-- 1 NoC, O bus -->
+			<param name="horizontal_nodes" value="2"/>
+			<param name="vertical_nodes" value="1"/>
+			<param name="has_global_link" value="0"/>
+			<!-- 1 has global link, 0 does not have global link -->
+			<param name="link_throughput" value="1"/><!--w.r.t clock -->
+			<param name="link_latency" value="1"/><!--w.r.t clock -->
+			<!-- througput >= latency -->
+			<!-- Router architecture -->
+			<param name="input_ports" value="6"/>
+			<param name="output_ports" value="6"/>
+			<param name="virtual_channel_per_port" value="1"/>
+			<!-- input buffer; in classic routers only input ports need buffers -->
+			<param name="flit_bits" value="32"/>
+			<param name="input_buffer_entries_per_vc" value="1"/><!--VCs within the same ports share input buffers whose size is propotional to the number of VCs-->
+			<param name="chip_coverage" value="1"/>
+			<!-- When multiple NOC present, one NOC will cover part of the whole chip. chip_coverage <=1 -->
+			<stat name="total_accesses" value="0"/>
+			<!-- This is the number of total accesses within the whole network not for each router -->
+			<stat name="duty_cycle" value="0.6"/>
+		</component>	
+<!--**********************************************************************-->
+<!--**********************************************************************-->
+
+		<component id="system.mem" name="mem">
+			<!-- Main memory property -->
+			<param name="mem_tech_node" value="23"/>
+			<param name="device_clock" value="200"/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
+			<param name="peak_transfer_rate" value="3200"/><!--MB/S-->
+			<param name="internal_prefetch_of_DRAM_chip" value="4"/>
+			<!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
+			<!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
+			<!-- above numbers can be easily found from Wikipedia -->
+			<param name="capacity_per_channel" value="4096"/> <!-- MB -->
+			<!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
+			Current McPAT assumes single DIMMs are used.--> 		
+			<param name="number_ranks" value="2"/>
+			<param name="num_banks_of_DRAM_chip" value="6"/>			
+			<param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
+			<param name="output_width_of_DRAM_chip" value="8"/>
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<!--number of Dram_chips_per_rank=" 72/output_width_of_DRAM_chip-->
+			<param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
+			<param name="burstlength_of_DRAM_chip" value="8"/>
+			<stat name="memory_accesses" value="1052"/>
+			<stat name="memory_reads" value="1052"/>
+			<stat name="memory_writes" value="1052"/>									
+		</component>
+		<component id="system.mc" name="mc">
+			<!-- Memeory controllers are for DDR(2,3...) DIMMs -->
+			<!-- current version of McPAT uses published values for base parameters of memory controller
+			improvments on MC will be added in later versions. -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="mc_clock" value="1848"/><!--DIMM IO bus clock rate MHz DDR2-400 for Niagara 1--> 
+			<param name="peak_transfer_rate" value="29568"/><!--MB/S  Syed: GTX 470 has 177.4GB/s mem transfer rate with 6 MCs -->
+			<param name="block_size" value="64"/><!--B-->
+			<param name="number_mcs" value="6"/><!-- 6 GDDR5 memory controllers  -->
+			<!-- current McPAT only supports homogeneous memory controllers -->
+			<param name="memory_channels_per_mc" value="2"/>
+			<param name="number_ranks" value="1"/>
+			<param name="withPHY" value="0"/>
+			<!-- # of ranks of each channel-->
+			<param name="req_window_size_per_channel" value="16"/>
+			<param name="IO_buffer_size_per_channel" value="16"/>
+			<param name="databus_width" value="32"/>
+			<param name="addressbus_width" value="32"/>
+			<param name="PRT_entries" value="32"/>
+			<!-- # of empirical DRAM model parameter -->
+			<param name="dram_cmd_coeff" value="0"/>
+			<param name="dram_act_coeff" value="0"/>
+			<param name="dram_nop_coeff" value="0"/>
+			<param name="dram_activity_coeff" value="0"/>
+			<param name="dram_pre_coeff" value="3.8475e-8f"/>
+			<param name="dram_rd_coeff" value="7.74707143e-8f"/>
+			<param name="dram_wr_coeff" value="3.54664286e-8f"/>
+			<param name="dram_req_coeff" value="0"/>
+			<param name="dram_const_coeff" value="0"/>
+
+			<!-- McPAT will add the control bus width to the addressbus width automatically -->
+			<stat name="memory_accesses" value="memory_accesses_match_mcpat"/>
+			<stat name="memory_reads" value="memory_reads_match_mcpat"/>
+			<stat name="memory_writes" value="memory_writes_match_mcpat"/>
+			<!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
+			the average power per MC or per channel. This is sufficent for most application. 
+			Further trackdown can be easily added in later versions. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.niu" name="niu">
+			<!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
+			<!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
+				 the low bound of clock rate of a 10Gb MAC is 150Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
+			the average power per nic or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.pcie" name="pcie">
+			<!-- On chip PCIe controller, including Phy-->
+			<!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
+				 the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
+			<param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
+			<param name="withPHY" value="1"/>
+			<param name="clockrate" value="350"/>
+			<param name="number_units" value="0"/>
+			<param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
+			the average power per pcie controller or per channel. This is sufficent for most application. -->  			
+		</component>
+<!--**********************************************************************-->
+		<component id="system.flashc" name="flashc">
+		    <param name="number_flashcs" value="0"/>
+			<param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
+            <param name="withPHY" value="1"/>
+			<param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
+			<stat name="duty_cycle" value="1.0"/> <!-- achievable max load <= 1.0 -->
+			<stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
+			<!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
+			the average power per fc or per channel. This is sufficent for most application -->  			
+		</component>
+<!--**********************************************************************-->
+
+		</component>
+</component>
+\ No newline at end of file
diff --git a/configs/tested-cfgs/SM7_TITANV/gpgpusim.config b/configs/tested-cfgs/SM7_TITANV/gpgpusim.config
index 0c69c70..5c6be22 100644
--- a/configs/tested-cfgs/SM7_TITANV/gpgpusim.config
+++ b/configs/tested-cfgs/SM7_TITANV/gpgpusim.config
@@ -200,9 +200,6 @@
 -enable_ptx_file_line_stats 1
 -visualizer_enabled 0
 
-# power model configs, disable it untill we create a real energy model for Volta
--power_simulation_enabled 0
-
 # tracing functionality
 #-trace_enabled 1
 #-trace_components WARP_SCHEDULER,SCOREBOARD
diff --git a/format-code.sh b/format-code.sh
index 9f47085..ac753f0 100755
--- a/format-code.sh
+++ b/format-code.sh
@@ -8,5 +8,5 @@ clang-format -i ${THIS_DIR}/src/gpgpu-sim/*.h
 clang-format -i ${THIS_DIR}/src/gpgpu-sim/*.cc
 clang-format -i ${THIS_DIR}/src/cuda-sim/*.h
 clang-format -i ${THIS_DIR}/src/cuda-sim/*.cc
-clang-format -i ${THIS_DIR}/src/gpuwattch/*.h
-clang-format -i ${THIS_DIR}/src/gpuwattch/*.cc
-\ No newline at end of file
+clang-format -i ${THIS_DIR}/src/accelwattch/*.h
+clang-format -i ${THIS_DIR}/src/accelwattch/*.cc
+\ No newline at end of file
diff --git a/setup_environment b/setup_environment
index 07d0788..d3ff840 100644
--- a/setup_environment
+++ b/setup_environment
@@ -117,18 +117,18 @@ fi
 
 # The following checks to see if the GPGPU-Sim power model is enabled.
 # GPGPUSIM_POWER_MODEL points to the directory where gpgpusim_mcpat is located.
-# If this is not set, it checks the default directory "$GPGPUSIM_ROOT/src/gpuwattch/".
-if [ -d $GPGPUSIM_ROOT/src/gpuwattch/ ]; then
-	if [ ! -f $GPGPUSIM_ROOT/src/gpuwattch/gpgpu_sim.verify ]; then
-		echo "ERROR ** gpgpu_sim.verify not found in $GPGPUSIM_ROOT/src/gpuwattch";
+# If this is not set, it checks the default directory "$GPGPUSIM_ROOT/src/accelwattch/".
+if [ -d $GPGPUSIM_ROOT/src/accelwattch/ ]; then
+	if [ ! -f $GPGPUSIM_ROOT/src/accelwattch/gpgpu_sim.verify ]; then
+		echo "ERROR ** gpgpu_sim.verify not found in $GPGPUSIM_ROOT/src/accelwattch";
 		return;
 	fi
-	export GPGPUSIM_POWER_MODEL=$GPGPUSIM_ROOT/src/gpuwattch/;
-	echo "configured with GPUWattch.";
+	export GPGPUSIM_POWER_MODEL=$GPGPUSIM_ROOT/src/accelwattch/;
+	echo "configured with AccelWattch.";
 elif [ -n "$GPGPUSIM_POWER_MODEL" ]; then
 	if [ ! -f $GPGPUSIM_POWER_MODEL/gpgpu_sim.verify ]; then
 		echo "";
-		echo "ERROR ** gpgpu_sim.verify not found in $GPGPUSIM_ROOT/src/gpuwattch/ - Either incorrect directory or incorrect McPAT version";
+		echo "ERROR ** gpgpu_sim.verify not found in $GPGPUSIM_ROOT/src/accelwattch/ - Either incorrect directory or incorrect McPAT version";
 		return;
 	fi
 	echo "configure with power model in $GPGPUSIM_POWER_MODEL.";
diff --git a/src/abstract_hardware_model.cc b/src/abstract_hardware_model.cc
index 30aee60..fda84e8 100644
--- a/src/abstract_hardware_model.cc
+++ b/src/abstract_hardware_model.cc
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Inderpreet Singh, Timothy Rogers,
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Inderpreet Singh, Timothy Rogers, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -26,6 +28,7 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 
+
 #include "abstract_hardware_model.h"
 #include <sys/stat.h>
 #include <algorithm>
@@ -281,14 +284,16 @@ void warp_inst_t::broadcast_barrier_reduction(
 void warp_inst_t::generate_mem_accesses() {
   if (empty() || op == MEMORY_BARRIER_OP || m_mem_accesses_created) return;
   if (!((op == LOAD_OP) || (op == TENSOR_CORE_LOAD_OP) || (op == STORE_OP) ||
-        (op == TENSOR_CORE_STORE_OP)))
+        (op == TENSOR_CORE_STORE_OP) ))
     return;
   if (m_warp_active_mask.count() == 0) return;  // predicated off
 
   const size_t starting_queue_size = m_accessq.size();
 
   assert(is_load() || is_store());
-  assert(m_per_scalar_thread_valid);  // need address information per thread
+
+  //if((space.get_type() != tex_space) && (space.get_type() != const_space))
+    assert(m_per_scalar_thread_valid);  // need address information per thread
 
   bool is_write = is_store();
 
diff --git a/src/abstract_hardware_model.h b/src/abstract_hardware_model.h
index 35e28ca..e9d7c76 100644
--- a/src/abstract_hardware_model.h
+++ b/src/abstract_hardware_model.h
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Inderpreet Singh,
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Inderpreet Singh, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -59,6 +61,30 @@ enum _memory_space_t {
   instruction_space
 };
 
+#ifndef COEFF_STRUCT
+#define COEFF_STRUCT
+
+struct PowerscalingCoefficients{
+    double int_coeff;
+    double int_mul_coeff;
+    double int_mul24_coeff;
+    double int_mul32_coeff;
+    double int_div_coeff;
+    double fp_coeff;
+    double dp_coeff;
+    double fp_mul_coeff;
+    double fp_div_coeff;
+    double dp_mul_coeff;
+    double dp_div_coeff;
+    double sqrt_coeff;
+    double log_coeff;
+    double sin_coeff;
+    double exp_coeff;
+    double tensor_coeff;
+    double tex_coeff;
+};
+#endif
+
 enum FuncCache {
   FuncCachePreferNone = 0,
   FuncCachePreferShared = 1,
@@ -134,8 +160,14 @@ enum special_operations_t {
   FP_SQRT_OP,
   FP_LG_OP,
   FP_SIN_OP,
-  FP_EXP_OP
+  FP_EXP_OP,
+  DP_MUL_OP,
+  DP_DIV_OP,
+  DP___OP,
+  TENSOR__OP,
+  TEX__OP
 };
+
 typedef enum special_operations_t
     special_ops;  // Required to identify for the power model
 enum operation_pipeline_t {
@@ -911,6 +943,7 @@ class inst_t {
     sp_op = OTHER_OP;
     op_pipe = UNKOWN_OP;
     mem_op = NOT_TEX;
+    const_cache_operand = 0;
     num_operands = 0;
     num_regs = 0;
     memset(out, 0, sizeof(unsigned));
@@ -939,6 +972,20 @@ class inst_t {
     return (op == STORE_OP || op == TENSOR_CORE_STORE_OP ||
             memory_op == memory_store);
   }
+
+  bool is_fp() const { return ((sp_op == FP__OP));}    //VIJAY
+  bool is_fpdiv() const { return ((sp_op == FP_DIV_OP));} 
+  bool is_fpmul() const { return ((sp_op == FP_MUL_OP));} 
+  bool is_dp() const { return ((sp_op == DP___OP));}    
+  bool is_dpdiv() const { return ((sp_op == DP_DIV_OP));} 
+  bool is_dpmul() const { return ((sp_op == DP_MUL_OP));}
+  bool is_imul() const { return ((sp_op == INT_MUL_OP));} 
+  bool is_imul24() const { return ((sp_op == INT_MUL24_OP));} 
+  bool is_imul32() const { return ((sp_op == INT_MUL32_OP));} 
+  bool is_idiv() const { return ((sp_op == INT_DIV_OP));}   
+  bool is_sfu() const {return ((sp_op == FP_SQRT_OP) || (sp_op == FP_LG_OP)  || (sp_op == FP_SIN_OP)  || (sp_op == FP_EXP_OP) || (sp_op == TENSOR__OP));}
+  bool is_alu() const {return (sp_op == INT__OP);}
+
   unsigned get_num_operands() const { return num_operands; }
   unsigned get_num_regs() const { return num_regs; }
   void set_num_regs(unsigned num) { num_regs = num; }
@@ -962,6 +1009,7 @@ class inst_t {
   operation_pipeline op_pipe;  // code (uarch visible) identify the pipeline of
                                // the operation (SP, SFU or MEM)
   mem_operation mem_op;        // code (uarch visible) identify memory type
+  bool const_cache_operand;   // has a load from constant memory as an operand
   _memory_op_t memory_op;      // memory_op used by ptxplus
   unsigned num_operands;
   unsigned num_regs;  // count vector operand as one register operand
diff --git a/src/gpuwattch/Alpha21364.xml b/src/accelwattch/Alpha21364.xml
index c40c4f5..c40c4f5 100644
--- a/src/gpuwattch/Alpha21364.xml
+++ b/src/accelwattch/Alpha21364.xml
diff --git a/src/gpuwattch/Niagara1.xml b/src/accelwattch/Niagara1.xml
index ae748e2..ae748e2 100644
--- a/src/gpuwattch/Niagara1.xml
+++ b/src/accelwattch/Niagara1.xml
diff --git a/src/gpuwattch/Niagara1_sharing.xml b/src/accelwattch/Niagara1_sharing.xml
index 93531ae..93531ae 100644
--- a/src/gpuwattch/Niagara1_sharing.xml
+++ b/src/accelwattch/Niagara1_sharing.xml
diff --git a/src/gpuwattch/Niagara1_sharing_DC.xml b/src/accelwattch/Niagara1_sharing_DC.xml
index 574ec81..574ec81 100644
--- a/src/gpuwattch/Niagara1_sharing_DC.xml
+++ b/src/accelwattch/Niagara1_sharing_DC.xml
diff --git a/src/gpuwattch/Niagara1_sharing_SBT.xml b/src/accelwattch/Niagara1_sharing_SBT.xml
index 32eeca3..32eeca3 100644
--- a/src/gpuwattch/Niagara1_sharing_SBT.xml
+++ b/src/accelwattch/Niagara1_sharing_SBT.xml
diff --git a/src/gpuwattch/Niagara1_sharing_ST.xml b/src/accelwattch/Niagara1_sharing_ST.xml
index 3f0573f..3f0573f 100644
--- a/src/gpuwattch/Niagara1_sharing_ST.xml
+++ b/src/accelwattch/Niagara1_sharing_ST.xml
diff --git a/src/gpuwattch/Niagara2.xml b/src/accelwattch/Niagara2.xml
index c7e311f..c7e311f 100644
--- a/src/gpuwattch/Niagara2.xml
+++ b/src/accelwattch/Niagara2.xml
diff --git a/src/gpuwattch/Penryn.xml b/src/accelwattch/Penryn.xml
index fe9715b..fe9715b 100644
--- a/src/gpuwattch/Penryn.xml
+++ b/src/accelwattch/Penryn.xml
diff --git a/src/gpuwattch/README b/src/accelwattch/README
index 4887b10..4887b10 100644
--- a/src/gpuwattch/README
+++ b/src/accelwattch/README
diff --git a/src/gpuwattch/XML_Parse.cc b/src/accelwattch/XML_Parse.cc
index 1b9a38a..eaec748 100644
--- a/src/gpuwattch/XML_Parse.cc
+++ b/src/accelwattch/XML_Parse.cc
@@ -30,12 +30,14 @@
  ***************************************************************************/
 /********************************************************************
  *      Modified by:
- ** Jingwen Leng, Univeristy of Texas, Austin                   * Syed Gilani,
- *University of Wisconsin–Madison                * Tayler Hetherington,
- *University of British Columbia         * Ahmed ElTantawy, University of
- *British Columbia             *
+ * Jingwen Leng, University of Texas, Austin                
+ * Syed Gilani, University of Wisconsin–Madison         
+ * Tayler Hetherington, University of British Columbia
+ * Ahmed ElTantawy, University of British Columbia
+ * Vijay Kandiah, Northwestern University
  ********************************************************************/
 
+
 #include "XML_Parse.h"
 #include <stdio.h>
 #include <string>
@@ -43,13 +45,14 @@
 
 using namespace std;
 
-const char* perf_count_label[] = {
-    "TOT_INST,",    "FP_INT,",  "IC_H,",     "IC_M,",        "DC_RH,",
-    "DC_RM,",       "DC_WH,",   "DC_WM,",    "TC_H,",        "TC_M,",
-    "CC_H,",        "CC_M,",    "SHRD_ACC,", "REG_RD,",      "REG_WR,",
-    "NON_REG_OPs,", "SP_ACC,",  "SFU_ACC,",  "FPU_ACC,",     "MEM_RD,",
-    "MEM_WR,",      "MEM_PRE,", "L2_RH,",    "L2_RM,",       "L2_WH,",
-    "L2_WM,",       "NOC_A,",   "PIPE_A,",   "IDLE_CORE_N,", "CONST_DYNAMICN"};
+const char * perf_count_label[] = {
+  "TOT_INST,", "FP_INT,", "IC_H,", "IC_M,", "DC_RH,", "DC_RM,", "DC_WH,", "DC_WM,",
+  "TC_H,", "TC_M,", "CC_H,", "CC_M,", "SHRD_ACC,", "REG_RD,", "REG_WR,", "NON_REG_OPs,",
+  "INT_ACC,", "FPU_ACC,", "DPU_ACC,", "INT_MUL24_ACC,", "INT_MUL32_ACC,", "INT_MUL_ACC,","INT_DIV_ACC,", 
+  "FP_MUL_ACC,", "FP_DIV_ACC,", "FP_SQRT_ACC,", "FP_LG_ACC,", "FP_SIN_ACC,", "FP_EXP_ACC,", "DP_MUL_ACC,", 
+  "DP_DIV_ACC,", "TENSOR_ACC,", "TEX_ACC,", "MEM_RD,","MEM_WR,", "MEM_PRE,", "L2_RH,", "L2_RM,", "L2_WH,",
+  "L2_WM,", "NOC_A,", "PIPE_A,", "IDLE_CORE_N,", "constant_power"};
+
 
 void ParseXML::parse(char* filepath) {
   unsigned int i, j, k, m, n;
@@ -160,6 +163,199 @@ void ParseXML::parse(char* filepath) {
           atoi(xNode2.getChildNode("param", i).getAttribute("value"));
       continue;
     }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "modeled_chip_voltage_ref") == 0) {
+      sys.modeled_chip_voltage_ref =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat1_flane") == 0) {
+      sys.static_cat1_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat2_flane") == 0) {
+      sys.static_cat2_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat3_flane") == 0) {
+      sys.static_cat3_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat4_flane") == 0) {
+      sys.static_cat4_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat5_flane") == 0) {
+      sys.static_cat5_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat6_flane") == 0) {
+      sys.static_cat6_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_shared_flane") == 0) {
+      sys.static_shared_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_l1_flane") == 0) {
+      sys.static_l1_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_l2_flane") == 0) {
+      sys.static_l2_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_light_flane") == 0) {
+      sys.static_light_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_intadd_flane") == 0) {
+      sys.static_intadd_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_intmul_flane") == 0) {
+      sys.static_intmul_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_geomean_flane") == 0) {
+      sys.static_geomean_flane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat1_addlane") == 0) {
+      sys.static_cat1_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat2_addlane") == 0) {
+      sys.static_cat2_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat3_addlane") == 0) {
+      sys.static_cat3_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat4_addlane") == 0) {
+      sys.static_cat4_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat5_addlane") == 0) {
+      sys.static_cat5_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_cat6_addlane") == 0) {
+      sys.static_cat6_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_shared_addlane") == 0) {
+      sys.static_shared_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_l1_addlane") == 0) {
+      sys.static_l1_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_l2_addlane") == 0) {
+      sys.static_l2_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_light_addlane") == 0) {
+      sys.static_light_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_intadd_addlane") == 0) {
+      sys.static_intadd_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_intmul_addlane") == 0) {
+      sys.static_intmul_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
+               "static_geomean_addlane") == 0) {
+      sys.static_geomean_addlane =
+          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+      continue;
+    }
+
+
     if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
                "target_chip_area") == 0) {
       sys.target_chip_area =
@@ -419,22 +615,106 @@ void ParseXML::parse(char* filepath) {
           atof(xNode2.getChildNode("param", i).getAttribute("value"));
       continue;
     }
-    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
-               "SP_ACC") == 0) {
-      sys.scaling_coefficients[SP_ACC] =
-          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "INT_ACC")==0) {
+      sys.scaling_coefficients[INT_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
       continue;
     }
-    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
-               "SFU_ACC") == 0) {
-      sys.scaling_coefficients[SFU_ACC] =
-          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_ACC")==0) {
+      sys.scaling_coefficients[FP_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
       continue;
     }
-    if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
-               "FPU_ACC") == 0) {
-      sys.scaling_coefficients[FPU_ACC] =
-          atof(xNode2.getChildNode("param", i).getAttribute("value"));
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "DP_ACC")==0) {
+      sys.scaling_coefficients[DP_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "INT_MUL24_ACC")==0) {
+      sys.scaling_coefficients[INT_MUL24_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "INT_MUL32_ACC")==0) {
+      sys.scaling_coefficients[INT_MUL32_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "INT_MUL_ACC")==0) {
+      sys.scaling_coefficients[INT_MUL_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "INT_DIV_ACC")==0) {
+      sys.scaling_coefficients[INT_DIV_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_MUL_ACC")==0) {
+      sys.scaling_coefficients[FP_MUL_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_DIV_ACC")==0) {
+      sys.scaling_coefficients[FP_DIV_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_SQRT_ACC")==0) {
+      sys.scaling_coefficients[FP_SQRT_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_LG_ACC")==0) {
+      sys.scaling_coefficients[FP_LG_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_SIN_ACC")==0) {
+      sys.scaling_coefficients[FP_SIN_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "FP_EXP_ACC")==0) {
+      sys.scaling_coefficients[FP_EXP_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "DP_MUL_ACC")==0) {
+      sys.scaling_coefficients[DP_MUL_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "DP_DIV_ACC")==0) {
+      sys.scaling_coefficients[DP_DIV_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "TENSOR_ACC")==0) {
+      sys.scaling_coefficients[TENSOR_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
+      continue;
+    }
+    if (strcmp(xNode2.getChildNode("param",i).getAttribute("name"),
+                "TEX_ACC")==0) {
+      sys.scaling_coefficients[TEX_ACC] =
+          atof(xNode2.getChildNode("param",i).getAttribute("value"));
       continue;
     }
     if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
@@ -498,8 +778,8 @@ void ParseXML::parse(char* filepath) {
       continue;
     }
     if (strcmp(xNode2.getChildNode("param", i).getAttribute("name"),
-               "CONST_DYNAMICN") == 0) {
-      sys.scaling_coefficients[CONST_DYNAMICN] =
+               "constant_power") == 0) {
+      sys.scaling_coefficients[constant_power] =
           atof(xNode2.getChildNode("param", i).getAttribute("value"));
       continue;
     }
@@ -4187,8 +4467,9 @@ void ParseXML::initialize()  // Initialize all
   // strcpy(sys.homogeneous_cores,"default");
   sys.core_tech_node = 1;
   sys.target_core_clockrate = 1;
+  sys.modeled_chip_voltage_ref = 1;
   sys.target_chip_area = 1;
-  sys.temperature = 1;
+  sys.temperature = 340;
   sys.number_cache_levels = 1;
   sys.homogeneous_cores = 1;
   sys.homogeneous_L1Directories = 1;
@@ -4198,6 +4479,34 @@ void ParseXML::initialize()  // Initialize all
   sys.homogeneous_NoCs = 1;
   sys.homogeneous_ccs = 1;
 
+  sys.static_cat1_flane = 0;
+  sys.static_cat2_flane = 0;
+  sys.static_cat3_flane = 0;
+  sys.static_cat4_flane = 0;
+  sys.static_cat5_flane = 0;
+  sys.static_cat6_flane = 0;
+  sys.static_shared_flane = 0;
+  sys.static_l1_flane = 0;
+  sys.static_l2_flane = 0;
+  sys.static_light_flane = 0;
+  sys.static_intadd_flane = 0;
+  sys.static_intmul_flane = 0;
+  sys.static_geomean_flane = 0;
+
+  sys.static_cat1_addlane = 0;
+  sys.static_cat2_addlane = 0;
+  sys.static_cat3_addlane = 0;
+  sys.static_cat4_addlane = 0;
+  sys.static_cat5_addlane = 0;
+  sys.static_cat6_addlane = 0;
+  sys.static_shared_addlane = 0;
+  sys.static_l1_addlane = 0;
+  sys.static_l2_addlane = 0;
+  sys.static_light_addlane = 0;
+  sys.static_intadd_addlane = 0;
+  sys.static_intmul_addlane = 0;
+  sys.static_geomean_addlane = 0;
+
   sys.Max_area_deviation = 1;
   sys.Max_power_deviation = 1;
   sys.device_type = 1;
diff --git a/src/gpuwattch/XML_Parse.h b/src/accelwattch/XML_Parse.h
index 30c4e4b..c82359f 100644
--- a/src/gpuwattch/XML_Parse.h
+++ b/src/accelwattch/XML_Parse.h
@@ -30,10 +30,11 @@
  ***************************************************************************/
 /********************************************************************
  *      Modified by:
- ** Jingwen Leng, Univeristy of Texas, Austin                   * Syed Gilani,
- *University of Wisconsin–Madison                * Tayler Hetherington,
- *University of British Columbia         * Ahmed ElTantawy, University of
- *British Columbia             *
+ * Jingwen Leng, University of Texas, Austin                
+ * Syed Gilani, University of Wisconsin–Madison         
+ * Tayler Hetherington, University of British Columbia
+ * Ahmed ElTantawy, University of British Columbia
+ * Vijay Kandiah, Northwestern University
  ********************************************************************/
 
 #ifndef XML_PARSE_H_
@@ -69,7 +70,7 @@ ToXMLStringTool tx,tx2;
 extern const char* perf_count_label[];
 
 enum perf_count_t {
-  TOT_INST = 0,
+  TOT_INST=0,
   FP_INT,
   IC_H,
   IC_M,
@@ -85,9 +86,23 @@ enum perf_count_t {
   REG_RD,
   REG_WR,
   NON_REG_OPs,
-  SP_ACC,
-  SFU_ACC,
-  FPU_ACC,
+  INT_ACC, //SPU
+  FP_ACC, //FPU
+  DP_ACC, //FPU
+  INT_MUL24_ACC, //SFU
+  INT_MUL32_ACC, //SFU
+  INT_MUL_ACC, //SFU 
+  INT_DIV_ACC, //SFU
+  FP_MUL_ACC, //SFU
+  FP_DIV_ACC, //SFU
+  FP_SQRT_ACC, //SFU
+  FP_LG_ACC, //SFU
+  FP_SIN_ACC, //SFU
+  FP_EXP_ACC, //SFU
+  DP_MUL_ACC, //SFU
+  DP_DIV_ACC, //SFU 
+  TENSOR_ACC, //SFU
+  TEX_ACC, //SFU 
   MEM_RD,
   MEM_WR,
   MEM_PRE,
@@ -98,7 +113,7 @@ enum perf_count_t {
   NOC_A,
   PIPE_A,
   IDLE_CORE_N,
-  CONST_DYNAMICN,
+  constant_power,
   NUM_PERFORMANCE_COUNTERS
 };
 
@@ -635,6 +650,33 @@ typedef struct {
   int homogeneous_L2Directories;
   double core_tech_node;
   int target_core_clockrate;
+  double modeled_chip_voltage_ref;
+  double static_cat1_flane;
+  double static_cat2_flane;
+  double static_cat3_flane;
+  double static_cat4_flane;
+  double static_cat5_flane;
+  double static_cat6_flane;
+  double static_shared_flane;
+  double static_l1_flane;
+  double static_l2_flane;
+  double static_light_flane;
+  double static_intadd_flane;
+  double static_intmul_flane;
+  double static_geomean_flane;
+  double static_cat1_addlane;
+  double static_cat2_addlane;
+  double static_cat3_addlane;
+  double static_cat4_addlane;
+  double static_cat5_addlane;
+  double static_cat6_addlane;
+  double static_shared_addlane;
+  double static_l1_addlane;
+  double static_l2_addlane;
+  double static_light_addlane;
+  double static_intadd_addlane;
+  double static_intmul_addlane;
+  double static_geomean_addlane;
   int target_chip_area;
   int temperature;
   int number_cache_levels;
diff --git a/src/gpuwattch/Xeon.xml b/src/accelwattch/Xeon.xml
index 5342104..5342104 100644
--- a/src/gpuwattch/Xeon.xml
+++ b/src/accelwattch/Xeon.xml
diff --git a/src/gpuwattch/arch_const.h b/src/accelwattch/arch_const.h
index 555cc17..555cc17 100644
--- a/src/gpuwattch/arch_const.h
+++ b/src/accelwattch/arch_const.h
diff --git a/src/gpuwattch/array.cc b/src/accelwattch/array.cc
index 108a16b..108a16b 100644
--- a/src/gpuwattch/array.cc
+++ b/src/accelwattch/array.cc
diff --git a/src/gpuwattch/array.h b/src/accelwattch/array.h
index e2dc3d1..e2dc3d1 100644
--- a/src/gpuwattch/array.h
+++ b/src/accelwattch/array.h
diff --git a/src/gpuwattch/basic_components.cc b/src/accelwattch/basic_components.cc
index d58023a..d58023a 100644
--- a/src/gpuwattch/basic_components.cc
+++ b/src/accelwattch/basic_components.cc
diff --git a/src/gpuwattch/basic_components.h b/src/accelwattch/basic_components.h
index 2e9907a..2e9907a 100644
--- a/src/gpuwattch/basic_components.h
+++ b/src/accelwattch/basic_components.h
diff --git a/src/gpuwattch/cacti/README b/src/accelwattch/cacti/README
index de429d2..de429d2 100644
--- a/src/gpuwattch/cacti/README
+++ b/src/accelwattch/cacti/README
diff --git a/src/gpuwattch/cacti/Ucache.cc b/src/accelwattch/cacti/Ucache.cc
index 8f733f7..e92e67b 100644
--- a/src/gpuwattch/cacti/Ucache.cc
+++ b/src/accelwattch/cacti/Ucache.cc
@@ -223,7 +223,7 @@ void * calc_time_mt_wrapper(void * void_obj)
   delete tag_arr.back();
   data_arr.pop_back();
   tag_arr.pop_back();
-
+  pthread_exit(NULL);
 }
 
 
@@ -246,7 +246,7 @@ bool calculate_time(
 {
   DynamicParameter dyn_p(is_tag, pure_ram, pure_cam, Nspd, Ndwl, Ndbl, Ndcm, Ndsam_lev_1, Ndsam_lev_2, is_main_mem);
 
-  if (dyn_p.is_valid == false)
+  if (dyn_p.is_valid != true)
   {
     return false;
   }
diff --git a/src/gpuwattch/cacti/Ucache.h b/src/accelwattch/cacti/Ucache.h
index cbd578f..cbd578f 100644
--- a/src/gpuwattch/cacti/Ucache.h
+++ b/src/accelwattch/cacti/Ucache.h
diff --git a/src/gpuwattch/cacti/arbiter.cc b/src/accelwattch/cacti/arbiter.cc
index f4f5204..f4f5204 100644
--- a/src/gpuwattch/cacti/arbiter.cc
+++ b/src/accelwattch/cacti/arbiter.cc
diff --git a/src/gpuwattch/cacti/arbiter.h b/src/accelwattch/cacti/arbiter.h
index 0884a04..0884a04 100644
--- a/src/gpuwattch/cacti/arbiter.h
+++ b/src/accelwattch/cacti/arbiter.h
diff --git a/src/gpuwattch/cacti/area.cc b/src/accelwattch/cacti/area.cc
index 0d8d4b7..0d8d4b7 100644
--- a/src/gpuwattch/cacti/area.cc
+++ b/src/accelwattch/cacti/area.cc
diff --git a/src/gpuwattch/cacti/area.h b/src/accelwattch/cacti/area.h
index 92272f0..92272f0 100644
--- a/src/gpuwattch/cacti/area.h
+++ b/src/accelwattch/cacti/area.h
diff --git a/src/gpuwattch/cacti/bank.cc b/src/accelwattch/cacti/bank.cc
index 2e58080..2e58080 100755
--- a/src/gpuwattch/cacti/bank.cc
+++ b/src/accelwattch/cacti/bank.cc
diff --git a/src/gpuwattch/cacti/bank.h b/src/accelwattch/cacti/bank.h
index 47300da..47300da 100755
--- a/src/gpuwattch/cacti/bank.h
+++ b/src/accelwattch/cacti/bank.h
diff --git a/src/gpuwattch/cacti/basic_circuit.cc b/src/accelwattch/cacti/basic_circuit.cc
index a8ea501..a8ea501 100644
--- a/src/gpuwattch/cacti/basic_circuit.cc
+++ b/src/accelwattch/cacti/basic_circuit.cc
diff --git a/src/gpuwattch/cacti/basic_circuit.h b/src/accelwattch/cacti/basic_circuit.h
index bafd3d3..bafd3d3 100644
--- a/src/gpuwattch/cacti/basic_circuit.h
+++ b/src/accelwattch/cacti/basic_circuit.h
diff --git a/src/gpuwattch/cacti/batch_tests b/src/accelwattch/cacti/batch_tests
index 45a0389..45a0389 100755
--- a/src/gpuwattch/cacti/batch_tests
+++ b/src/accelwattch/cacti/batch_tests
diff --git a/src/gpuwattch/cacti/cache.cfg b/src/accelwattch/cacti/cache.cfg
index 03de34a..03de34a 100755
--- a/src/gpuwattch/cacti/cache.cfg
+++ b/src/accelwattch/cacti/cache.cfg
diff --git a/src/gpuwattch/cacti/cacti.i b/src/accelwattch/cacti/cacti.i
index 7964138..7964138 100644
--- a/src/gpuwattch/cacti/cacti.i
+++ b/src/accelwattch/cacti/cacti.i
diff --git a/src/gpuwattch/cacti/cacti.mk b/src/accelwattch/cacti/cacti.mk
index 7f3c573..41f9218 100644
--- a/src/gpuwattch/cacti/cacti.mk
+++ b/src/accelwattch/cacti/cacti.mk
@@ -1,5 +1,5 @@
 
-OUTPUT_DIR=$(SIM_OBJ_FILES_DIR)/gpuwattch/cacti
+OUTPUT_DIR=$(SIM_OBJ_FILES_DIR)/accelwattch/cacti
 TARGET = cacti
 SHELL = /bin/sh
 .PHONY: all depend clean
diff --git a/src/gpuwattch/cacti/cacti_interface.cc b/src/accelwattch/cacti/cacti_interface.cc
index 99d734d..99d734d 100644
--- a/src/gpuwattch/cacti/cacti_interface.cc
+++ b/src/accelwattch/cacti/cacti_interface.cc
diff --git a/src/gpuwattch/cacti/cacti_interface.h b/src/accelwattch/cacti/cacti_interface.h
index ff639da..ff639da 100644
--- a/src/gpuwattch/cacti/cacti_interface.h
+++ b/src/accelwattch/cacti/cacti_interface.h
diff --git a/src/gpuwattch/cacti/component.cc b/src/accelwattch/cacti/component.cc
index abe5cb9..abe5cb9 100644
--- a/src/gpuwattch/cacti/component.cc
+++ b/src/accelwattch/cacti/component.cc
diff --git a/src/gpuwattch/cacti/component.h b/src/accelwattch/cacti/component.h
index 74a089d..74a089d 100644
--- a/src/gpuwattch/cacti/component.h
+++ b/src/accelwattch/cacti/component.h
diff --git a/src/gpuwattch/cacti/const.h b/src/accelwattch/cacti/const.h
index ada91f9..ada91f9 100644
--- a/src/gpuwattch/cacti/const.h
+++ b/src/accelwattch/cacti/const.h
diff --git a/src/gpuwattch/cacti/contention.dat b/src/accelwattch/cacti/contention.dat
index 826553e..826553e 100755
--- a/src/gpuwattch/cacti/contention.dat
+++ b/src/accelwattch/cacti/contention.dat
diff --git a/src/gpuwattch/cacti/crossbar.cc b/src/accelwattch/cacti/crossbar.cc
index d7386a8..d7386a8 100644
--- a/src/gpuwattch/cacti/crossbar.cc
+++ b/src/accelwattch/cacti/crossbar.cc
diff --git a/src/gpuwattch/cacti/crossbar.h b/src/accelwattch/cacti/crossbar.h
index 47339c0..47339c0 100644
--- a/src/gpuwattch/cacti/crossbar.h
+++ b/src/accelwattch/cacti/crossbar.h
diff --git a/src/gpuwattch/cacti/decoder.cc b/src/accelwattch/cacti/decoder.cc
index 32644d9..32644d9 100644
--- a/src/gpuwattch/cacti/decoder.cc
+++ b/src/accelwattch/cacti/decoder.cc
diff --git a/src/gpuwattch/cacti/decoder.h b/src/accelwattch/cacti/decoder.h
index 6366e16..6366e16 100644
--- a/src/gpuwattch/cacti/decoder.h
+++ b/src/accelwattch/cacti/decoder.h
diff --git a/src/gpuwattch/cacti/highradix.cc b/src/accelwattch/cacti/highradix.cc
index e06cad7..e06cad7 100644
--- a/src/gpuwattch/cacti/highradix.cc
+++ b/src/accelwattch/cacti/highradix.cc
diff --git a/src/gpuwattch/cacti/highradix.h b/src/accelwattch/cacti/highradix.h
index 7b41801..7b41801 100644
--- a/src/gpuwattch/cacti/highradix.h
+++ b/src/accelwattch/cacti/highradix.h
diff --git a/src/gpuwattch/cacti/htree2.cc b/src/accelwattch/cacti/htree2.cc
index c40a880..c40a880 100644
--- a/src/gpuwattch/cacti/htree2.cc
+++ b/src/accelwattch/cacti/htree2.cc
diff --git a/src/gpuwattch/cacti/htree2.h b/src/accelwattch/cacti/htree2.h
index 6700e80..6700e80 100644
--- a/src/gpuwattch/cacti/htree2.h
+++ b/src/accelwattch/cacti/htree2.h
diff --git a/src/gpuwattch/cacti/io.cc b/src/accelwattch/cacti/io.cc
index c513dbf..c513dbf 100644
--- a/src/gpuwattch/cacti/io.cc
+++ b/src/accelwattch/cacti/io.cc
diff --git a/src/gpuwattch/cacti/io.h b/src/accelwattch/cacti/io.h
index 1bd06cf..1bd06cf 100644
--- a/src/gpuwattch/cacti/io.h
+++ b/src/accelwattch/cacti/io.h
diff --git a/src/gpuwattch/cacti/main.cc b/src/accelwattch/cacti/main.cc
index 58c2fe1..58c2fe1 100644
--- a/src/gpuwattch/cacti/main.cc
+++ b/src/accelwattch/cacti/main.cc
diff --git a/src/gpuwattch/cacti/makefile b/src/accelwattch/cacti/makefile
index 6cc36db..6cc36db 100644
--- a/src/gpuwattch/cacti/makefile
+++ b/src/accelwattch/cacti/makefile
diff --git a/src/gpuwattch/cacti/mat.cc b/src/accelwattch/cacti/mat.cc
index dc903da..dc903da 100755
--- a/src/gpuwattch/cacti/mat.cc
+++ b/src/accelwattch/cacti/mat.cc
diff --git a/src/gpuwattch/cacti/mat.h b/src/accelwattch/cacti/mat.h
index e408a7d..e408a7d 100755
--- a/src/gpuwattch/cacti/mat.h
+++ b/src/accelwattch/cacti/mat.h
diff --git a/src/gpuwattch/cacti/nuca.cc b/src/accelwattch/cacti/nuca.cc
index f31b0c8..f31b0c8 100644
--- a/src/gpuwattch/cacti/nuca.cc
+++ b/src/accelwattch/cacti/nuca.cc
diff --git a/src/gpuwattch/cacti/nuca.h b/src/accelwattch/cacti/nuca.h
index bbdee7d..bbdee7d 100644
--- a/src/gpuwattch/cacti/nuca.h
+++ b/src/accelwattch/cacti/nuca.h
diff --git a/src/gpuwattch/cacti/out_batch_test_result.csv b/src/accelwattch/cacti/out_batch_test_result.csv
index 74cd5f2..74cd5f2 100644
--- a/src/gpuwattch/cacti/out_batch_test_result.csv
+++ b/src/accelwattch/cacti/out_batch_test_result.csv
diff --git a/src/gpuwattch/cacti/parameter.cc b/src/accelwattch/cacti/parameter.cc
index 3f5a802..3f5a802 100644
--- a/src/gpuwattch/cacti/parameter.cc
+++ b/src/accelwattch/cacti/parameter.cc
diff --git a/src/gpuwattch/cacti/parameter.h b/src/accelwattch/cacti/parameter.h
index 2c977ee..2c977ee 100644
--- a/src/gpuwattch/cacti/parameter.h
+++ b/src/accelwattch/cacti/parameter.h
diff --git a/src/gpuwattch/cacti/router.cc b/src/accelwattch/cacti/router.cc
index 9826c69..9826c69 100644
--- a/src/gpuwattch/cacti/router.cc
+++ b/src/accelwattch/cacti/router.cc
diff --git a/src/gpuwattch/cacti/router.h b/src/accelwattch/cacti/router.h
index 21023c4..21023c4 100644
--- a/src/gpuwattch/cacti/router.h
+++ b/src/accelwattch/cacti/router.h
diff --git a/src/gpuwattch/cacti/subarray.cc b/src/accelwattch/cacti/subarray.cc
index ef5737d..ef5737d 100755
--- a/src/gpuwattch/cacti/subarray.cc
+++ b/src/accelwattch/cacti/subarray.cc
diff --git a/src/gpuwattch/cacti/subarray.h b/src/accelwattch/cacti/subarray.h
index 5fb0624..5fb0624 100755
--- a/src/gpuwattch/cacti/subarray.h
+++ b/src/accelwattch/cacti/subarray.h
diff --git a/src/gpuwattch/cacti/technology.cc b/src/accelwattch/cacti/technology.cc
index 7067470..7067470 100644
--- a/src/gpuwattch/cacti/technology.cc
+++ b/src/accelwattch/cacti/technology.cc
diff --git a/src/gpuwattch/cacti/uca.cc b/src/accelwattch/cacti/uca.cc
index ed9be49..ed9be49 100755
--- a/src/gpuwattch/cacti/uca.cc
+++ b/src/accelwattch/cacti/uca.cc
diff --git a/src/gpuwattch/cacti/uca.h b/src/accelwattch/cacti/uca.h
index 93ae3c5..93ae3c5 100755
--- a/src/gpuwattch/cacti/uca.h
+++ b/src/accelwattch/cacti/uca.h
diff --git a/src/gpuwattch/cacti/wire.cc b/src/accelwattch/cacti/wire.cc
index 3da3e84..3da3e84 100644
--- a/src/gpuwattch/cacti/wire.cc
+++ b/src/accelwattch/cacti/wire.cc
diff --git a/src/gpuwattch/cacti/wire.h b/src/accelwattch/cacti/wire.h
index ace7c9c..ace7c9c 100644
--- a/src/gpuwattch/cacti/wire.h
+++ b/src/accelwattch/cacti/wire.h
diff --git a/src/gpuwattch/core.cc b/src/accelwattch/core.cc
index cbaefc7..cbaefc7 100644
--- a/src/gpuwattch/core.cc
+++ b/src/accelwattch/core.cc
diff --git a/src/gpuwattch/core.h b/src/accelwattch/core.h
index 67ff4b1..67ff4b1 100644
--- a/src/gpuwattch/core.h
+++ b/src/accelwattch/core.h
diff --git a/src/gpuwattch/fermi.xml b/src/accelwattch/fermi.xml
index 5b09d45..5b09d45 100755
--- a/src/gpuwattch/fermi.xml
+++ b/src/accelwattch/fermi.xml
diff --git a/src/gpuwattch/globalvar.h b/src/accelwattch/globalvar.h
index e0b76c2..e0b76c2 100644
--- a/src/gpuwattch/globalvar.h
+++ b/src/accelwattch/globalvar.h
diff --git a/src/gpuwattch/gpgpu.xml b/src/accelwattch/gpgpu.xml
index 313527c..313527c 100644
--- a/src/gpuwattch/gpgpu.xml
+++ b/src/accelwattch/gpgpu.xml
diff --git a/src/gpuwattch/gpgpu_sim.verify b/src/accelwattch/gpgpu_sim.verify
index 3b32656..3b32656 100644
--- a/src/gpuwattch/gpgpu_sim.verify
+++ b/src/accelwattch/gpgpu_sim.verify
diff --git a/src/accelwattch/gpgpu_sim_wrapper.cc b/src/accelwattch/gpgpu_sim_wrapper.cc
new file mode 100644
index 0000000..67d9daa
--- /dev/null
+++ b/src/accelwattch/gpgpu_sim_wrapper.cc
@@ -0,0 +1,1143 @@
+// Copyright (c) 2009-2021, Tor M. Aamodt, Tayler Hetherington, Ahmed ElTantawy, Vijay Kandiah, Nikos Hardavellas
+// The University of British Columbia, Northwestern University
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+
+#include "gpgpu_sim_wrapper.h"
+#include <sys/stat.h>
+#define SP_BASE_POWER 0
+#define SFU_BASE_POWER 0
+
+static const char* pwr_cmp_label[] = {
+    "IBP,", "ICP,", "DCP,", "TCP,", "CCP,", "SHRDP,", "RFP,", "INTP,", 
+    "FPUP,", "DPUP,", "INT_MUL24P,", "INT_MUL32P,", "INT_MULP,", "INT_DIVP,", 
+    "FP_MULP,", "FP_DIVP,", "FP_SQRTP,", "FP_LGP,", "FP_SINP,", "FP_EXP,", 
+    "DP_MULP,", "DP_DIVP,", "TENSORP,", "TEXP,", "SCHEDP,", "L2CP,", "MCP,", "NOCP,", 
+    "DRAMP,", "PIPEP,", "IDLE_COREP,", "CONSTP", "STATICP"};
+
+enum pwr_cmp_t {
+  IBP=0,
+  ICP,
+  DCP,
+  TCP,
+  CCP,
+  SHRDP,
+  RFP,
+  INTP,
+  FPUP,
+  DPUP,
+  INT_MUL24P,
+  INT_MUL32P,
+  INT_MULP,
+  INT_DIVP,
+  FP_MULP,
+  FP_DIVP,
+  FP_SQRTP,
+  FP_LGP,
+  FP_SINP,
+  FP_EXP,
+  DP_MULP,
+  DP_DIVP,
+  TENSORP,
+  TEXP,
+  SCHEDP,
+  L2CP,
+  MCP,
+  NOCP,
+  DRAMP,
+  PIPEP,
+  IDLE_COREP,
+  CONSTP,
+  STATICP,
+  NUM_COMPONENTS_MODELLED
+};
+
+gpgpu_sim_wrapper::gpgpu_sim_wrapper(bool power_simulation_enabled,
+                                     char* xmlfile, int power_simulation_mode, bool dvfs_enabled) {
+  kernel_sample_count = 0;
+  total_sample_count = 0;
+
+  kernel_tot_power = 0;
+  avg_threads_per_warp_tot = 0;
+  num_pwr_cmps = NUM_COMPONENTS_MODELLED;
+  num_perf_counters = NUM_PERFORMANCE_COUNTERS;
+
+  // Initialize per-component counter/power vectors
+  avg_max_min_counters<double> init;
+  kernel_cmp_pwr.resize(NUM_COMPONENTS_MODELLED, init);
+  kernel_cmp_perf_counters.resize(NUM_PERFORMANCE_COUNTERS, init);
+
+  kernel_power = init;   // Per-kernel powers
+  gpu_tot_power = init;  // Global powers
+
+  sample_cmp_pwr.resize(NUM_COMPONENTS_MODELLED, 0);
+
+  sample_perf_counters.resize(NUM_PERFORMANCE_COUNTERS, 0);
+  initpower_coeff.resize(NUM_PERFORMANCE_COUNTERS, 0);
+  effpower_coeff.resize(NUM_PERFORMANCE_COUNTERS, 0);
+
+  const_dynamic_power = 0;
+  proc_power = 0;
+
+  g_power_filename = NULL;
+  g_power_trace_filename = NULL;
+  g_metric_trace_filename = NULL;
+  g_steady_state_tracking_filename = NULL;
+  xml_filename = xmlfile;
+  g_power_simulation_enabled = power_simulation_enabled;
+  g_power_simulation_mode = power_simulation_mode;
+  g_dvfs_enabled = dvfs_enabled;
+  g_power_trace_enabled = false;
+  g_steady_power_levels_enabled = false;
+  g_power_trace_zlevel = 0;
+  g_power_per_cycle_dump = false;
+  gpu_steady_power_deviation = 0;
+  gpu_steady_min_period = 0;
+
+  gpu_stat_sample_freq = 0;
+  p = new ParseXML();
+  if (g_power_simulation_enabled) {
+    p->parse(xml_filename);
+  }
+  proc = new Processor(p);
+  power_trace_file = NULL;
+  metric_trace_file = NULL;
+  steady_state_tacking_file = NULL;
+  has_written_avg = false;
+  init_inst_val = false;
+}
+
+gpgpu_sim_wrapper::~gpgpu_sim_wrapper() {}
+
+bool gpgpu_sim_wrapper::sanity_check(double a, double b) {
+  if (b == 0)
+    return (abs(a - b) < 0.00001);
+  else
+    return (abs(a - b) / abs(b) < 0.00001);
+
+  return false;
+}
+void gpgpu_sim_wrapper::init_mcpat_hw_mode(unsigned gpu_sim_cycle) {
+   p->sys.total_cycles = gpu_sim_cycle; //total simulated cycles for current kernel
+}
+
+void gpgpu_sim_wrapper::init_mcpat(
+    char* xmlfile, char* powerfilename, char* power_trace_filename,
+    char* metric_trace_filename, char* steady_state_filename,
+    bool power_sim_enabled, bool trace_enabled, bool steady_state_enabled,
+    bool power_per_cycle_dump, double steady_power_deviation,
+    double steady_min_period, int zlevel, double init_val,
+    int stat_sample_freq, int power_sim_mode, bool dvfs_enabled,
+    unsigned clock_freq, unsigned num_shaders) {
+  // Write File Headers for (-metrics trace, -power trace)
+
+  reset_counters();
+  static bool mcpat_init = true;
+
+  // initialize file name if it is not set
+  time_t curr_time;
+  time(&curr_time);
+  char* date = ctime(&curr_time);
+  char* s = date;
+  while (*s) {
+    if (*s == ' ' || *s == '\t' || *s == ':') *s = '-';
+    if (*s == '\n' || *s == '\r') *s = 0;
+    s++;
+  }
+
+  if (mcpat_init) {
+    g_power_filename = powerfilename;
+    g_power_trace_filename = power_trace_filename;
+    g_metric_trace_filename = metric_trace_filename;
+    g_steady_state_tracking_filename = steady_state_filename;
+    xml_filename = xmlfile;
+    g_power_simulation_enabled = power_sim_enabled;
+    g_power_simulation_mode = power_sim_mode;
+    g_dvfs_enabled = dvfs_enabled;
+    g_power_trace_enabled = trace_enabled;
+    g_steady_power_levels_enabled = steady_state_enabled;
+    g_power_trace_zlevel = zlevel;
+    g_power_per_cycle_dump = power_per_cycle_dump;
+    gpu_steady_power_deviation = steady_power_deviation;
+    gpu_steady_min_period = steady_min_period;
+
+    gpu_stat_sample_freq = stat_sample_freq;
+
+    // p->sys.total_cycles=gpu_stat_sample_freq*4;
+    p->sys.total_cycles = gpu_stat_sample_freq;
+    p->sys.target_core_clockrate = clock_freq;
+    p->sys.number_of_cores = num_shaders;
+    p->sys.core[0].clock_rate = clock_freq;
+    power_trace_file = NULL;
+    metric_trace_file = NULL;
+    steady_state_tacking_file = NULL;
+
+    if (g_power_trace_enabled) {
+      power_trace_file = gzopen(g_power_trace_filename, "w");
+      metric_trace_file = gzopen(g_metric_trace_filename, "w");
+      if ((power_trace_file == NULL) || (metric_trace_file == NULL)) {
+        printf("error - could not open trace files \n");
+        exit(1);
+      }
+      gzsetparams(power_trace_file, g_power_trace_zlevel, Z_DEFAULT_STRATEGY);
+
+      gzprintf(power_trace_file, "power,");
+      for (unsigned i = 0; i < num_pwr_cmps; i++) {
+        gzprintf(power_trace_file, pwr_cmp_label[i]);
+      }
+      gzprintf(power_trace_file, "\n");
+
+      gzsetparams(metric_trace_file, g_power_trace_zlevel, Z_DEFAULT_STRATEGY);
+      for (unsigned i = 0; i < num_perf_counters; i++) {
+        gzprintf(metric_trace_file, perf_count_label[i]);
+      }
+      gzprintf(metric_trace_file, "\n");
+
+      gzclose(power_trace_file);
+      gzclose(metric_trace_file);
+    }
+    if (g_steady_power_levels_enabled) {
+      steady_state_tacking_file = gzopen(g_steady_state_tracking_filename, "w");
+      if ((steady_state_tacking_file == NULL)) {
+        printf("error - could not open trace files \n");
+        exit(1);
+      }
+      gzsetparams(steady_state_tacking_file, g_power_trace_zlevel,
+                  Z_DEFAULT_STRATEGY);
+      gzprintf(steady_state_tacking_file, "start,end,power,IPC,");
+      for (unsigned i = 0; i < num_perf_counters; i++) {
+        gzprintf(steady_state_tacking_file, perf_count_label[i]);
+      }
+      gzprintf(steady_state_tacking_file, "\n");
+
+      gzclose(steady_state_tacking_file);
+    }
+
+    mcpat_init = false;
+    has_written_avg = false;
+    powerfile.open(g_power_filename);
+    int flg = chmod(g_power_filename, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+    assert(flg == 0);
+  }
+  sample_val = 0;
+  init_inst_val = init_val;  // gpu_tot_sim_insn+gpu_sim_insn;
+}
+
+void gpgpu_sim_wrapper::reset_counters() {
+  avg_max_min_counters<double> init;
+  for (unsigned i = 0; i < num_perf_counters; ++i) {
+    sample_perf_counters[i] = 0;
+    kernel_cmp_perf_counters[i] = init;
+  }
+  for (unsigned i = 0; i < num_pwr_cmps; ++i) {
+    sample_cmp_pwr[i] = 0;
+    kernel_cmp_pwr[i] = init;
+  }
+
+  // Reset per-kernel counters
+  kernel_sample_count = 0;
+  kernel_tot_power = 0;
+  kernel_power = init;
+  avg_threads_per_warp_tot = 0;
+  return;
+}
+
+void gpgpu_sim_wrapper::set_inst_power(bool clk_gated_lanes, double tot_cycles,
+                                       double busy_cycles, double tot_inst,
+                                       double int_inst, double fp_inst,
+                                       double load_inst, double store_inst,
+                                       double committed_inst) {
+  p->sys.core[0].gpgpu_clock_gated_lanes = clk_gated_lanes;
+  p->sys.core[0].total_cycles = tot_cycles;
+  p->sys.core[0].busy_cycles = busy_cycles;
+  p->sys.core[0].total_instructions =
+      tot_inst * p->sys.scaling_coefficients[TOT_INST];
+  p->sys.core[0].int_instructions =
+      int_inst * p->sys.scaling_coefficients[FP_INT];
+  p->sys.core[0].fp_instructions =
+      fp_inst * p->sys.scaling_coefficients[FP_INT];
+  p->sys.core[0].load_instructions = load_inst;
+  p->sys.core[0].store_instructions = store_inst;
+  p->sys.core[0].committed_instructions = committed_inst;
+  sample_perf_counters[FP_INT] = int_inst + fp_inst;
+  sample_perf_counters[TOT_INST] = tot_inst;
+}
+
+void gpgpu_sim_wrapper::set_regfile_power(double reads, double writes,
+                                          double ops) {
+  p->sys.core[0].int_regfile_reads =
+      reads * p->sys.scaling_coefficients[REG_RD];
+  p->sys.core[0].int_regfile_writes =
+      writes * p->sys.scaling_coefficients[REG_WR];
+  p->sys.core[0].non_rf_operands =
+      ops * p->sys.scaling_coefficients[NON_REG_OPs];
+  sample_perf_counters[REG_RD] = reads;
+  sample_perf_counters[REG_WR] = writes;
+  sample_perf_counters[NON_REG_OPs] = ops;
+}
+
+void gpgpu_sim_wrapper::set_icache_power(double hits, double misses) {
+  p->sys.core[0].icache.read_accesses =
+      hits * p->sys.scaling_coefficients[IC_H] +
+      misses * p->sys.scaling_coefficients[IC_M];
+  p->sys.core[0].icache.read_misses =
+      misses * p->sys.scaling_coefficients[IC_M];
+  sample_perf_counters[IC_H] = hits;
+  sample_perf_counters[IC_M] = misses;
+}
+
+void gpgpu_sim_wrapper::set_ccache_power(double hits, double misses) {
+  p->sys.core[0].ccache.read_accesses =
+      hits * p->sys.scaling_coefficients[CC_H] +
+      misses * p->sys.scaling_coefficients[CC_M];
+  p->sys.core[0].ccache.read_misses =
+      misses * p->sys.scaling_coefficients[CC_M];
+  sample_perf_counters[CC_H] = hits;
+  sample_perf_counters[CC_M] = misses;
+  // TODO: coalescing logic is counted as part of the caches power (this is not
+  // valid for no-caches architectures)
+}
+
+void gpgpu_sim_wrapper::set_tcache_power(double hits, double misses) {
+  p->sys.core[0].tcache.read_accesses =
+      hits * p->sys.scaling_coefficients[TC_H] +
+      misses * p->sys.scaling_coefficients[TC_M];
+  p->sys.core[0].tcache.read_misses =
+      misses * p->sys.scaling_coefficients[TC_M];
+  sample_perf_counters[TC_H] = hits;
+  sample_perf_counters[TC_M] = misses;
+  // TODO: coalescing logic is counted as part of the caches power (this is not
+  // valid for no-caches architectures)
+}
+
+void gpgpu_sim_wrapper::set_shrd_mem_power(double accesses) {
+  p->sys.core[0].sharedmemory.read_accesses =
+      accesses * p->sys.scaling_coefficients[SHRD_ACC];
+  sample_perf_counters[SHRD_ACC] = accesses;
+}
+
+void gpgpu_sim_wrapper::set_l1cache_power(double read_hits, double read_misses,
+                                          double write_hits,
+                                          double write_misses) {
+  p->sys.core[0].dcache.read_accesses =
+      read_hits * p->sys.scaling_coefficients[DC_RH] +
+      read_misses * p->sys.scaling_coefficients[DC_RM];
+  p->sys.core[0].dcache.read_misses =
+      read_misses * p->sys.scaling_coefficients[DC_RM];
+  p->sys.core[0].dcache.write_accesses =
+      write_hits * p->sys.scaling_coefficients[DC_WH] +
+      write_misses * p->sys.scaling_coefficients[DC_WM];
+  p->sys.core[0].dcache.write_misses =
+      write_misses * p->sys.scaling_coefficients[DC_WM];
+  sample_perf_counters[DC_RH] = read_hits;
+  sample_perf_counters[DC_RM] = read_misses;
+  sample_perf_counters[DC_WH] = write_hits;
+  sample_perf_counters[DC_WM] = write_misses;
+  // TODO: coalescing logic is counted as part of the caches power (this is not
+  // valid for no-caches architectures)
+}
+
+void gpgpu_sim_wrapper::set_l2cache_power(double read_hits, double read_misses,
+                                          double write_hits,
+                                          double write_misses) {
+  p->sys.l2.total_accesses = read_hits * p->sys.scaling_coefficients[L2_RH] +
+                             read_misses * p->sys.scaling_coefficients[L2_RM] +
+                             write_hits * p->sys.scaling_coefficients[L2_WH] +
+                             write_misses * p->sys.scaling_coefficients[L2_WM];
+  p->sys.l2.read_accesses = read_hits * p->sys.scaling_coefficients[L2_RH] +
+                            read_misses * p->sys.scaling_coefficients[L2_RM];
+  p->sys.l2.write_accesses = write_hits * p->sys.scaling_coefficients[L2_WH] +
+                             write_misses * p->sys.scaling_coefficients[L2_WM];
+  p->sys.l2.read_hits = read_hits * p->sys.scaling_coefficients[L2_RH];
+  p->sys.l2.read_misses = read_misses * p->sys.scaling_coefficients[L2_RM];
+  p->sys.l2.write_hits = write_hits * p->sys.scaling_coefficients[L2_WH];
+  p->sys.l2.write_misses = write_misses * p->sys.scaling_coefficients[L2_WM];
+  sample_perf_counters[L2_RH] = read_hits;
+  sample_perf_counters[L2_RM] = read_misses;
+  sample_perf_counters[L2_WH] = write_hits;
+  sample_perf_counters[L2_WM] = write_misses;
+}
+
+void gpgpu_sim_wrapper::set_num_cores(double num_core) {
+  
+  num_cores = num_core;
+}
+
+void gpgpu_sim_wrapper::set_idle_core_power(double num_idle_core) {
+  p->sys.num_idle_cores = num_idle_core;
+  sample_perf_counters[IDLE_CORE_N] = num_idle_core;
+  num_idle_cores = num_idle_core;
+}
+
+void gpgpu_sim_wrapper::set_duty_cycle_power(double duty_cycle) {
+  p->sys.core[0].pipeline_duty_cycle =
+      duty_cycle * p->sys.scaling_coefficients[PIPE_A];
+  sample_perf_counters[PIPE_A] = duty_cycle;
+}
+
+void gpgpu_sim_wrapper::set_mem_ctrl_power(double reads, double writes,
+                                           double dram_precharge) {
+  p->sys.mc.memory_accesses = reads * p->sys.scaling_coefficients[MEM_RD] +
+                              writes * p->sys.scaling_coefficients[MEM_WR];
+  p->sys.mc.memory_reads = reads * p->sys.scaling_coefficients[MEM_RD];
+  p->sys.mc.memory_writes = writes * p->sys.scaling_coefficients[MEM_WR];
+  p->sys.mc.dram_pre = dram_precharge * p->sys.scaling_coefficients[MEM_PRE];
+  sample_perf_counters[MEM_RD] = reads;
+  sample_perf_counters[MEM_WR] = writes;
+  sample_perf_counters[MEM_PRE] = dram_precharge;
+}
+
+
+void gpgpu_sim_wrapper::set_model_voltage(double model_voltage) {
+	modeled_chip_voltage = model_voltage;
+}
+
+
+void gpgpu_sim_wrapper::set_exec_unit_power(double fpu_accesses,
+                                            double ialu_accesses,
+                                            double sfu_accesses) {
+  p->sys.core[0].fpu_accesses = fpu_accesses;
+  tot_fpu_accesses = fpu_accesses;
+  //Integer ALU (not present in Tesla)
+  p->sys.core[0].ialu_accesses = ialu_accesses;
+
+  //Sfu accesses
+  p->sys.core[0].mul_accesses = sfu_accesses;
+  tot_sfu_accesses = sfu_accesses;
+}
+
+PowerscalingCoefficients * gpgpu_sim_wrapper::get_scaling_coeffs()
+{
+
+  PowerscalingCoefficients * scalingCoeffs = new PowerscalingCoefficients();
+
+  scalingCoeffs->int_coeff = p->sys.scaling_coefficients[INT_ACC];
+  scalingCoeffs->int_mul_coeff = p->sys.scaling_coefficients[INT_MUL_ACC];
+  scalingCoeffs->int_mul24_coeff = p->sys.scaling_coefficients[INT_MUL24_ACC];
+  scalingCoeffs->int_mul32_coeff = p->sys.scaling_coefficients[INT_MUL32_ACC];
+  scalingCoeffs->int_div_coeff = p->sys.scaling_coefficients[INT_DIV_ACC];
+  scalingCoeffs->fp_coeff = p->sys.scaling_coefficients[FP_ACC];
+  scalingCoeffs->dp_coeff = p->sys.scaling_coefficients[DP_ACC];
+  scalingCoeffs->fp_mul_coeff = p->sys.scaling_coefficients[FP_MUL_ACC];
+  scalingCoeffs->fp_div_coeff = p->sys.scaling_coefficients[FP_DIV_ACC];
+  scalingCoeffs->dp_mul_coeff = p->sys.scaling_coefficients[DP_MUL_ACC];
+  scalingCoeffs->dp_div_coeff = p->sys.scaling_coefficients[DP_DIV_ACC];
+  scalingCoeffs->sqrt_coeff = p->sys.scaling_coefficients[FP_SQRT_ACC];
+  scalingCoeffs->log_coeff = p->sys.scaling_coefficients[FP_LG_ACC];
+  scalingCoeffs->sin_coeff = p->sys.scaling_coefficients[FP_SIN_ACC];
+  scalingCoeffs->exp_coeff = p->sys.scaling_coefficients[FP_EXP_ACC];
+  scalingCoeffs->tensor_coeff = p->sys.scaling_coefficients[TENSOR_ACC];
+  scalingCoeffs->tex_coeff = p->sys.scaling_coefficients[TEX_ACC];
+  return scalingCoeffs;
+
+}
+
+void gpgpu_sim_wrapper::set_int_accesses(double ialu_accesses, 
+                                        double imul24_accesses, 
+                                        double imul32_accesses, 
+                                        double imul_accesses, 
+                                        double idiv_accesses)
+{
+
+  sample_perf_counters[INT_ACC]=ialu_accesses;
+  sample_perf_counters[INT_MUL24_ACC]=imul24_accesses;
+  sample_perf_counters[INT_MUL32_ACC]=imul32_accesses;
+  sample_perf_counters[INT_MUL_ACC]=imul_accesses;
+  sample_perf_counters[INT_DIV_ACC]=idiv_accesses;
+}
+
+void gpgpu_sim_wrapper::set_dp_accesses(double dpu_accesses, 
+                                        double dpmul_accesses, 
+                                        double dpdiv_accesses)
+{
+  sample_perf_counters[DP_ACC]=dpu_accesses;
+  sample_perf_counters[DP_MUL_ACC]=dpmul_accesses;
+  sample_perf_counters[DP_DIV_ACC]=dpdiv_accesses;
+}
+
+void gpgpu_sim_wrapper::set_fp_accesses(double fpu_accesses, 
+                                        double fpmul_accesses, 
+                                        double fpdiv_accesses)
+{
+  sample_perf_counters[FP_ACC]=fpu_accesses;
+  sample_perf_counters[FP_MUL_ACC]=fpmul_accesses;
+  sample_perf_counters[FP_DIV_ACC]=fpdiv_accesses;
+}
+
+void gpgpu_sim_wrapper::set_trans_accesses(double sqrt_accesses, 
+                                           double log_accesses, 
+                                           double sin_accesses, 
+                                           double exp_accesses)
+{
+
+  sample_perf_counters[FP_SQRT_ACC]=sqrt_accesses;
+  sample_perf_counters[FP_LG_ACC]=log_accesses;
+  sample_perf_counters[FP_SIN_ACC]=sin_accesses;
+  sample_perf_counters[FP_EXP_ACC]=exp_accesses;
+
+}
+
+void gpgpu_sim_wrapper::set_tensor_accesses(double tensor_accesses)
+{
+  sample_perf_counters[TENSOR_ACC]=tensor_accesses;
+
+}
+
+void gpgpu_sim_wrapper::set_tex_accesses(double tex_accesses)
+{
+  sample_perf_counters[TEX_ACC]=tex_accesses;
+
+}
+
+void gpgpu_sim_wrapper::set_avg_active_threads(float active_threads)
+{
+  avg_threads_per_warp = (unsigned)ceil(active_threads);
+  avg_threads_per_warp_tot += active_threads;
+}
+
+void gpgpu_sim_wrapper::set_active_lanes_power(double sp_avg_active_lane,
+                                               double sfu_avg_active_lane) {
+  p->sys.core[0].sp_average_active_lanes = sp_avg_active_lane;
+  p->sys.core[0].sfu_average_active_lanes = sfu_avg_active_lane;
+}
+
+void gpgpu_sim_wrapper::set_NoC_power(double noc_tot_acc) {
+  p->sys.NoC[0].total_accesses =
+      noc_tot_acc * p->sys.scaling_coefficients[NOC_A];
+  sample_perf_counters[NOC_A] = noc_tot_acc;
+}
+
+void gpgpu_sim_wrapper::power_metrics_calculations() {
+  total_sample_count++;
+  kernel_sample_count++;
+
+  // Current sample power
+  double sample_power = proc->rt_power.readOp.dynamic + sample_cmp_pwr[CONSTP] + sample_cmp_pwr[STATICP];
+  // double sample_power;
+  // for(unsigned i=0; i<num_pwr_cmps; i++){
+  //   sample_power+=sample_cmp_pwr[i]; //fix for dvfs
+  // }
+
+  // Average power
+  // Previous + new + constant dynamic power (e.g., dynamic clocking power)
+  kernel_tot_power += sample_power;
+  kernel_power.avg = kernel_tot_power / kernel_sample_count;
+  for (unsigned ind = 0; ind < num_pwr_cmps; ++ind) {
+    kernel_cmp_pwr[ind].avg += (double)sample_cmp_pwr[ind];
+  }
+
+  for (unsigned ind = 0; ind < num_perf_counters; ++ind) {
+    kernel_cmp_perf_counters[ind].avg += (double)sample_perf_counters[ind];
+  }
+
+  // Max Power
+  if (sample_power > kernel_power.max) {
+    kernel_power.max = sample_power;
+    for (unsigned ind = 0; ind < num_pwr_cmps; ++ind) {
+      kernel_cmp_pwr[ind].max = (double)sample_cmp_pwr[ind];
+    }
+    for (unsigned ind = 0; ind < num_perf_counters; ++ind) {
+      kernel_cmp_perf_counters[ind].max = sample_perf_counters[ind];
+    }
+  }
+
+  // Min Power
+  if (sample_power < kernel_power.min || (kernel_power.min == 0)) {
+    kernel_power.min = sample_power;
+    for (unsigned ind = 0; ind < num_pwr_cmps; ++ind) {
+      kernel_cmp_pwr[ind].min = (double)sample_cmp_pwr[ind];
+    }
+    for (unsigned ind = 0; ind < num_perf_counters; ++ind) {
+      kernel_cmp_perf_counters[ind].min = sample_perf_counters[ind];
+    }
+  }
+
+  gpu_tot_power.avg = (gpu_tot_power.avg + sample_power);
+  gpu_tot_power.max =
+      (sample_power > gpu_tot_power.max) ? sample_power : gpu_tot_power.max;
+  gpu_tot_power.min =
+      ((sample_power < gpu_tot_power.min) || (gpu_tot_power.min == 0))
+          ? sample_power
+          : gpu_tot_power.min;
+}
+
+void gpgpu_sim_wrapper::print_trace_files() {
+  open_files();
+
+  for (unsigned i = 0; i < num_perf_counters; ++i) {
+    gzprintf(metric_trace_file, "%f,", sample_perf_counters[i]);
+  }
+  gzprintf(metric_trace_file, "\n");
+
+  gzprintf(power_trace_file, "%f,", proc_power);
+  for (unsigned i = 0; i < num_pwr_cmps; ++i) {
+    gzprintf(power_trace_file, "%f,", sample_cmp_pwr[i]);
+  }
+  gzprintf(power_trace_file, "\n");
+
+  close_files();
+}
+
+void gpgpu_sim_wrapper::update_coefficients()
+{
+
+  initpower_coeff[FP_INT]=proc->cores[0]->get_coefficient_fpint_insts();
+  effpower_coeff[FP_INT]=initpower_coeff[FP_INT] * p->sys.scaling_coefficients[FP_INT];
+
+  initpower_coeff[TOT_INST]=proc->cores[0]->get_coefficient_tot_insts();
+  effpower_coeff[TOT_INST]=initpower_coeff[TOT_INST] * p->sys.scaling_coefficients[TOT_INST];
+
+  initpower_coeff[REG_RD]=proc->cores[0]->get_coefficient_regreads_accesses()*(proc->cores[0]->exu->rf_fu_clockRate/proc->cores[0]->exu->clockRate);
+  initpower_coeff[REG_WR]=proc->cores[0]->get_coefficient_regwrites_accesses()*(proc->cores[0]->exu->rf_fu_clockRate/proc->cores[0]->exu->clockRate);
+  initpower_coeff[NON_REG_OPs]=proc->cores[0]->get_coefficient_noregfileops_accesses()*(proc->cores[0]->exu->rf_fu_clockRate/proc->cores[0]->exu->clockRate);
+  effpower_coeff[REG_RD]=initpower_coeff[REG_RD]*p->sys.scaling_coefficients[REG_RD];
+  effpower_coeff[REG_WR]=initpower_coeff[REG_WR]*p->sys.scaling_coefficients[REG_WR];
+  effpower_coeff[NON_REG_OPs]=initpower_coeff[NON_REG_OPs]*p->sys.scaling_coefficients[NON_REG_OPs];
+
+  initpower_coeff[IC_H]=proc->cores[0]->get_coefficient_icache_hits();
+  initpower_coeff[IC_M]=proc->cores[0]->get_coefficient_icache_misses();
+  effpower_coeff[IC_H]=initpower_coeff[IC_H]*p->sys.scaling_coefficients[IC_H];
+  effpower_coeff[IC_M]=initpower_coeff[IC_M]*p->sys.scaling_coefficients[IC_M];
+
+  initpower_coeff[CC_H]=(proc->cores[0]->get_coefficient_ccache_readhits()+proc->get_coefficient_readcoalescing());
+  initpower_coeff[CC_M]=(proc->cores[0]->get_coefficient_ccache_readmisses()+proc->get_coefficient_readcoalescing());
+  effpower_coeff[CC_H]=initpower_coeff[CC_H]*p->sys.scaling_coefficients[CC_H];
+  effpower_coeff[CC_M]=initpower_coeff[CC_M]*p->sys.scaling_coefficients[CC_M];
+
+  initpower_coeff[TC_H]=(proc->cores[0]->get_coefficient_tcache_readhits()+proc->get_coefficient_readcoalescing());
+  initpower_coeff[TC_M]=(proc->cores[0]->get_coefficient_tcache_readmisses()+proc->get_coefficient_readcoalescing());
+  effpower_coeff[TC_H]=initpower_coeff[TC_H]*p->sys.scaling_coefficients[TC_H];
+  effpower_coeff[TC_M]=initpower_coeff[TC_M]*p->sys.scaling_coefficients[TC_M];
+
+  initpower_coeff[SHRD_ACC]=proc->cores[0]->get_coefficient_sharedmemory_readhits();
+  effpower_coeff[SHRD_ACC]=initpower_coeff[SHRD_ACC]*p->sys.scaling_coefficients[SHRD_ACC];
+
+  initpower_coeff[DC_RH]=(proc->cores[0]->get_coefficient_dcache_readhits() + proc->get_coefficient_readcoalescing());
+  initpower_coeff[DC_RM]=(proc->cores[0]->get_coefficient_dcache_readmisses() + proc->get_coefficient_readcoalescing());
+  initpower_coeff[DC_WH]=(proc->cores[0]->get_coefficient_dcache_writehits() + proc->get_coefficient_writecoalescing());
+  initpower_coeff[DC_WM]=(proc->cores[0]->get_coefficient_dcache_writemisses() + proc->get_coefficient_writecoalescing());
+  effpower_coeff[DC_RH]=initpower_coeff[DC_RH]*p->sys.scaling_coefficients[DC_RH];
+  effpower_coeff[DC_RM]=initpower_coeff[DC_RM]*p->sys.scaling_coefficients[DC_RM];
+  effpower_coeff[DC_WH]=initpower_coeff[DC_WH]*p->sys.scaling_coefficients[DC_WH];
+  effpower_coeff[DC_WM]=initpower_coeff[DC_WM]*p->sys.scaling_coefficients[DC_WM];
+
+  initpower_coeff[L2_RH]=proc->get_coefficient_l2_read_hits();
+  initpower_coeff[L2_RM]=proc->get_coefficient_l2_read_misses();
+  initpower_coeff[L2_WH]=proc->get_coefficient_l2_write_hits();
+  initpower_coeff[L2_WM]=proc->get_coefficient_l2_write_misses();
+  effpower_coeff[L2_RH]=initpower_coeff[L2_RH]*p->sys.scaling_coefficients[L2_RH];
+  effpower_coeff[L2_RM]=initpower_coeff[L2_RM]*p->sys.scaling_coefficients[L2_RM];
+  effpower_coeff[L2_WH]=initpower_coeff[L2_WH]*p->sys.scaling_coefficients[L2_WH];
+  effpower_coeff[L2_WM]=initpower_coeff[L2_WM]*p->sys.scaling_coefficients[L2_WM];
+
+  initpower_coeff[IDLE_CORE_N]=p->sys.idle_core_power * proc->cores[0]->executionTime;
+  effpower_coeff[IDLE_CORE_N]=initpower_coeff[IDLE_CORE_N]*p->sys.scaling_coefficients[IDLE_CORE_N];
+
+  initpower_coeff[PIPE_A]=proc->cores[0]->get_coefficient_duty_cycle();
+  effpower_coeff[PIPE_A]=initpower_coeff[PIPE_A]*p->sys.scaling_coefficients[PIPE_A];
+
+  initpower_coeff[MEM_RD]=proc->get_coefficient_mem_reads();
+  initpower_coeff[MEM_WR]=proc->get_coefficient_mem_writes();
+  initpower_coeff[MEM_PRE]=proc->get_coefficient_mem_pre();
+  effpower_coeff[MEM_RD]=initpower_coeff[MEM_RD]*p->sys.scaling_coefficients[MEM_RD];
+  effpower_coeff[MEM_WR]=initpower_coeff[MEM_WR]*p->sys.scaling_coefficients[MEM_WR];
+  effpower_coeff[MEM_PRE]=initpower_coeff[MEM_PRE]*p->sys.scaling_coefficients[MEM_PRE];
+  
+  double fp_coeff = proc->cores[0]->get_coefficient_fpu_accesses();
+  double sfu_coeff = proc->cores[0]->get_coefficient_sfu_accesses();
+
+  initpower_coeff[INT_ACC]= proc->cores[0]->get_coefficient_ialu_accesses()*(proc->cores[0]->exu->rf_fu_clockRate/proc->cores[0]->exu->clockRate);
+
+  if(tot_fpu_accesses != 0){
+    initpower_coeff[FP_ACC]= fp_coeff * sample_perf_counters[FP_ACC]/tot_fpu_accesses;
+    initpower_coeff[DP_ACC]= fp_coeff * sample_perf_counters[DP_ACC]/tot_fpu_accesses;
+  }
+  else{
+    initpower_coeff[FP_ACC]= 0;
+    initpower_coeff[DP_ACC]= 0;
+  }
+
+  if(tot_sfu_accesses != 0){
+    initpower_coeff[INT_MUL24_ACC]= sfu_coeff * sample_perf_counters[INT_MUL24_ACC]/tot_sfu_accesses;
+    initpower_coeff[INT_MUL32_ACC]= sfu_coeff * sample_perf_counters[INT_MUL32_ACC]/tot_sfu_accesses;
+    initpower_coeff[INT_MUL_ACC]= sfu_coeff * sample_perf_counters[INT_MUL_ACC]/tot_sfu_accesses;
+    initpower_coeff[INT_DIV_ACC]= sfu_coeff * sample_perf_counters[INT_DIV_ACC]/tot_sfu_accesses;
+    initpower_coeff[DP_MUL_ACC]= sfu_coeff * sample_perf_counters[DP_MUL_ACC]/tot_sfu_accesses;
+    initpower_coeff[DP_DIV_ACC]= sfu_coeff * sample_perf_counters[DP_DIV_ACC]/tot_sfu_accesses;
+    initpower_coeff[FP_MUL_ACC]= sfu_coeff * sample_perf_counters[FP_MUL_ACC]/tot_sfu_accesses;
+    initpower_coeff[FP_DIV_ACC]= sfu_coeff * sample_perf_counters[FP_DIV_ACC]/tot_sfu_accesses;
+    initpower_coeff[FP_SQRT_ACC]= sfu_coeff * sample_perf_counters[FP_SQRT_ACC]/tot_sfu_accesses;
+    initpower_coeff[FP_LG_ACC]= sfu_coeff * sample_perf_counters[FP_LG_ACC]/tot_sfu_accesses;
+    initpower_coeff[FP_SIN_ACC]= sfu_coeff * sample_perf_counters[FP_SIN_ACC]/tot_sfu_accesses;
+    initpower_coeff[FP_EXP_ACC]= sfu_coeff * sample_perf_counters[FP_EXP_ACC]/tot_sfu_accesses;
+    initpower_coeff[TENSOR_ACC]= sfu_coeff * sample_perf_counters[TENSOR_ACC]/tot_sfu_accesses;
+    initpower_coeff[TEX_ACC]= sfu_coeff * sample_perf_counters[TEX_ACC]/tot_sfu_accesses;
+  }
+  else{
+    initpower_coeff[INT_MUL24_ACC]= 0;
+    initpower_coeff[INT_MUL32_ACC]= 0;
+    initpower_coeff[INT_MUL_ACC]= 0;
+    initpower_coeff[INT_DIV_ACC]= 0;
+    initpower_coeff[DP_MUL_ACC]= 0;
+    initpower_coeff[DP_DIV_ACC]= 0;
+    initpower_coeff[FP_MUL_ACC]= 0;
+    initpower_coeff[FP_DIV_ACC]= 0;
+    initpower_coeff[FP_SQRT_ACC]= 0;
+    initpower_coeff[FP_LG_ACC]= 0;
+    initpower_coeff[FP_SIN_ACC]= 0;
+    initpower_coeff[FP_EXP_ACC]= 0;
+    initpower_coeff[TENSOR_ACC]= 0;
+    initpower_coeff[TEX_ACC]= 0;
+  }
+
+  effpower_coeff[INT_ACC]= initpower_coeff[INT_ACC];
+  effpower_coeff[FP_ACC]= initpower_coeff[FP_ACC];
+  effpower_coeff[DP_ACC]= initpower_coeff[DP_ACC];
+  effpower_coeff[INT_MUL24_ACC]= initpower_coeff[INT_MUL24_ACC];
+  effpower_coeff[INT_MUL32_ACC]= initpower_coeff[INT_MUL32_ACC];
+  effpower_coeff[INT_MUL_ACC]= initpower_coeff[INT_MUL_ACC];
+  effpower_coeff[INT_DIV_ACC]= initpower_coeff[INT_DIV_ACC];
+  effpower_coeff[DP_MUL_ACC]= initpower_coeff[DP_MUL_ACC];
+  effpower_coeff[DP_DIV_ACC]= initpower_coeff[DP_DIV_ACC];
+  effpower_coeff[FP_MUL_ACC]= initpower_coeff[FP_MUL_ACC];
+  effpower_coeff[FP_DIV_ACC]= initpower_coeff[FP_DIV_ACC];
+  effpower_coeff[FP_SQRT_ACC]= initpower_coeff[FP_SQRT_ACC];
+  effpower_coeff[FP_LG_ACC]= initpower_coeff[FP_LG_ACC];
+  effpower_coeff[FP_SIN_ACC]= initpower_coeff[FP_SIN_ACC];
+  effpower_coeff[FP_EXP_ACC]= initpower_coeff[FP_EXP_ACC];
+  effpower_coeff[TENSOR_ACC]= initpower_coeff[TENSOR_ACC];
+  effpower_coeff[TEX_ACC]= initpower_coeff[TEX_ACC];
+
+  initpower_coeff[NOC_A]=proc->get_coefficient_noc_accesses();
+  effpower_coeff[NOC_A]=initpower_coeff[NOC_A]*p->sys.scaling_coefficients[NOC_A];
+
+  //const_dynamic_power=proc->get_const_dynamic_power()/(proc->cores[0]->executionTime);
+
+  for(unsigned i=0; i<num_perf_counters; i++){
+    initpower_coeff[i]/=(proc->cores[0]->executionTime);
+    effpower_coeff[i]/=(proc->cores[0]->executionTime);
+  }
+}
+
+double gpgpu_sim_wrapper::calculate_static_power(){ 
+	double int_accesses = initpower_coeff[INT_ACC] + initpower_coeff[INT_MUL24_ACC] + initpower_coeff[INT_MUL32_ACC] + initpower_coeff[INT_MUL_ACC] + initpower_coeff[INT_DIV_ACC];
+	double int_add_accesses = initpower_coeff[INT_ACC];
+	double int_mul_accesses = initpower_coeff[INT_MUL24_ACC] + initpower_coeff[INT_MUL32_ACC] + initpower_coeff[INT_MUL_ACC] + initpower_coeff[INT_DIV_ACC];
+	double fp_accesses = initpower_coeff[FP_ACC] + initpower_coeff[FP_MUL_ACC] + initpower_coeff[FP_DIV_ACC];
+	double dp_accesses = initpower_coeff[DP_ACC] + initpower_coeff[DP_MUL_ACC] + initpower_coeff[DP_DIV_ACC];
+	double sfu_accesses = initpower_coeff[FP_SQRT_ACC] + initpower_coeff[FP_LG_ACC] + initpower_coeff[FP_SIN_ACC] + initpower_coeff[FP_EXP_ACC];
+	double tensor_accesses = initpower_coeff[TENSOR_ACC];
+	double tex_accesses = initpower_coeff[TEX_ACC];
+	double total_static_power = 0.0;
+	double base_static_power = 0.0; 
+	double lane_static_power = 0.0;
+	double per_active_core = (num_cores - num_idle_cores)/num_cores;
+
+
+	double l1_accesses = initpower_coeff[DC_RH] + initpower_coeff[DC_RM] + initpower_coeff[DC_WH] + initpower_coeff[DC_WM];
+	double l2_accesses = initpower_coeff[L2_RH] + initpower_coeff[L2_RM] + initpower_coeff[L2_WH] + initpower_coeff[L2_WM];
+	double shared_accesses = initpower_coeff[SHRD_ACC];
+
+
+	if(avg_threads_per_warp == 0){ //no functional unit threads, check for memory or a 'LIGHT_SM'
+		if(l1_accesses != 0.0)
+			return (p->sys.static_l1_flane*per_active_core);
+		else if(shared_accesses != 0.0)
+			return (p->sys.static_shared_flane*per_active_core);
+		else if(l2_accesses != 0.0)
+			return (p->sys.static_l2_flane*per_active_core);
+		else //LIGHT_SM
+			return (p->sys.static_light_flane*per_active_core); //return LIGHT_SM base static power
+	}
+
+	/* using a linear model for thread divergence */
+	if((int_accesses != 0.0) && (fp_accesses != 0.0) && (dp_accesses != 0.0) && (sfu_accesses == 0.0) && (tensor_accesses == 0.0) && (tex_accesses == 0.0)){
+		/* INT_FP_DP */
+		base_static_power = p->sys.static_cat3_flane;
+		lane_static_power = p->sys.static_cat3_addlane;
+	}
+
+	else if((int_accesses != 0.0) && (fp_accesses != 0.0) && (dp_accesses == 0.0) && (sfu_accesses == 0.0) && (tensor_accesses != 0.0) && (tex_accesses == 0.0)){
+		/* INT_FP_TENSOR */
+		base_static_power = p->sys.static_cat6_flane;
+		lane_static_power = p->sys.static_cat6_addlane;
+	}
+
+	else if((int_accesses != 0.0) && (fp_accesses != 0.0) && (dp_accesses == 0.0) && (sfu_accesses != 0.0) && (tensor_accesses == 0.0) && (tex_accesses == 0.0)){
+		/* INT_FP_SFU */
+		base_static_power = p->sys.static_cat4_flane;
+		lane_static_power = p->sys.static_cat4_addlane;
+	}
+
+	else if((int_accesses != 0.0) && (fp_accesses != 0.0) && (dp_accesses == 0.0) && (sfu_accesses == 0.0) && (tensor_accesses == 0.0) && (tex_accesses != 0.0)){
+		/* INT_FP_TEX */
+		base_static_power = p->sys.static_cat5_flane;
+		lane_static_power = p->sys.static_cat5_addlane;
+	}
+
+	else if((int_accesses != 0.0) && (fp_accesses != 0.0) && (dp_accesses == 0.0) && (sfu_accesses == 0.0) && (tensor_accesses == 0.0) && (tex_accesses == 0.0)){
+		/* INT_FP */
+		base_static_power = p->sys.static_cat2_flane;
+		lane_static_power = p->sys.static_cat2_addlane;
+	}
+
+	else if((int_accesses != 0.0) && (fp_accesses == 0.0) && (dp_accesses == 0.0) && (sfu_accesses == 0.0) && (tensor_accesses == 0.0) && (tex_accesses == 0.0)){
+		/* INT */
+		/* Seperating INT_ADD only and INT_MUL only from mix of INT instructions */
+		if((int_add_accesses != 0.0) && (int_mul_accesses == 0.0)){ //INT_ADD
+			base_static_power = p->sys.static_intadd_flane;
+			lane_static_power = p->sys.static_intadd_addlane;
+		}
+		else if((int_add_accesses == 0.0) && (int_mul_accesses != 0.0)){ //INT_MUL
+			base_static_power = p->sys.static_intmul_flane;
+			lane_static_power = p->sys.static_intmul_addlane;
+		}
+		else{ //INT_ADD+MUL
+			base_static_power = p->sys.static_cat1_flane;
+			lane_static_power = p->sys.static_cat1_addlane;
+		}
+	}
+
+	else if((int_accesses == 0.0) && (fp_accesses == 0.0) && (dp_accesses == 0.0) && (sfu_accesses == 0.0) && (tensor_accesses == 0.0) && (tex_accesses == 0.0)){
+		/* LIGHT_SM or memory only sample */
+		lane_static_power = 0.0; //addlane static power is 0 for l1/l2/shared memory only accesses
+		if(l1_accesses != 0.0)
+			base_static_power = p->sys.static_l1_flane;
+		else if(shared_accesses != 0.0)
+			base_static_power = p->sys.static_shared_flane;
+		else if(l2_accesses != 0.0)
+			base_static_power = p->sys.static_l2_flane;
+		else{
+			base_static_power = p->sys.static_light_flane;
+			lane_static_power = p->sys.static_light_addlane;
+		}
+	}
+	else{
+		base_static_power = p->sys.static_geomean_flane; //GEOMEAN except LIGHT_SM if we don't fall into any of the categories above
+		lane_static_power = p->sys.static_geomean_addlane;
+	}
+
+	total_static_power = base_static_power + (((double)avg_threads_per_warp-1.0)*lane_static_power); //Linear Model
+	return (total_static_power*per_active_core);
+}
+
+void gpgpu_sim_wrapper::update_components_power()
+{
+
+  update_coefficients();
+
+  proc_power=proc->rt_power.readOp.dynamic;
+  sample_cmp_pwr[IBP]=(proc->cores[0]->ifu->IB->rt_power.readOp.dynamic
+          +proc->cores[0]->ifu->IB->rt_power.writeOp.dynamic
+          +proc->cores[0]->ifu->ID_misc->rt_power.readOp.dynamic
+          +proc->cores[0]->ifu->ID_operand->rt_power.readOp.dynamic
+          +proc->cores[0]->ifu->ID_inst->rt_power.readOp.dynamic)/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[ICP]=proc->cores[0]->ifu->icache.rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[DCP]=proc->cores[0]->lsu->dcache.rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[TCP]=proc->cores[0]->lsu->tcache.rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[CCP]=proc->cores[0]->lsu->ccache.rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[SHRDP]=proc->cores[0]->lsu->sharedmemory.rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[RFP]=(proc->cores[0]->exu->rfu->rt_power.readOp.dynamic/(proc->cores[0]->executionTime))
+         *(proc->cores[0]->exu->rf_fu_clockRate/proc->cores[0]->exu->clockRate);
+
+  double sample_fp_pwr = (proc->cores[0]->exu->fp_u->rt_power.readOp.dynamic/(proc->cores[0]->executionTime));
+
+  double sample_sfu_pwr = (proc->cores[0]->exu->mul->rt_power.readOp.dynamic/(proc->cores[0]->executionTime));
+
+  sample_cmp_pwr[INTP]=(proc->cores[0]->exu->exeu->rt_power.readOp.dynamic/(proc->cores[0]->executionTime))
+         *(proc->cores[0]->exu->rf_fu_clockRate/proc->cores[0]->exu->clockRate);
+
+  
+  if(tot_fpu_accesses != 0){
+    sample_cmp_pwr[FPUP]= sample_fp_pwr * sample_perf_counters[FP_ACC]/tot_fpu_accesses;
+    sample_cmp_pwr[DPUP]= sample_fp_pwr * sample_perf_counters[DP_ACC]/tot_fpu_accesses;
+  }
+  else{
+    sample_cmp_pwr[FPUP]= 0;
+    sample_cmp_pwr[DPUP]= 0;
+  }
+  if(tot_sfu_accesses != 0){
+    sample_cmp_pwr[INT_MUL24P]= sample_sfu_pwr * sample_perf_counters[INT_MUL24_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[INT_MUL32P]= sample_sfu_pwr * sample_perf_counters[INT_MUL32_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[INT_MULP]= sample_sfu_pwr * sample_perf_counters[INT_MUL_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[INT_DIVP]= sample_sfu_pwr * sample_perf_counters[INT_DIV_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[FP_MULP]= sample_sfu_pwr * sample_perf_counters[FP_MUL_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[FP_DIVP]= sample_sfu_pwr * sample_perf_counters[FP_DIV_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[FP_SQRTP]= sample_sfu_pwr * sample_perf_counters[FP_SQRT_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[FP_LGP]= sample_sfu_pwr * sample_perf_counters[FP_LG_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[FP_SINP]= sample_sfu_pwr * sample_perf_counters[FP_SIN_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[FP_EXP]= sample_sfu_pwr * sample_perf_counters[FP_EXP_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[DP_MULP]= sample_sfu_pwr * sample_perf_counters[DP_MUL_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[DP_DIVP]= sample_sfu_pwr * sample_perf_counters[DP_DIV_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[TENSORP]= sample_sfu_pwr * sample_perf_counters[TENSOR_ACC]/tot_sfu_accesses;
+    sample_cmp_pwr[TEXP]= sample_sfu_pwr * sample_perf_counters[TEX_ACC]/tot_sfu_accesses;
+  }
+  else{
+    sample_cmp_pwr[INT_MUL24P]= 0;
+    sample_cmp_pwr[INT_MUL32P]= 0;
+    sample_cmp_pwr[INT_MULP]= 0;
+    sample_cmp_pwr[INT_DIVP]= 0;
+    sample_cmp_pwr[FP_MULP]= 0;
+    sample_cmp_pwr[FP_DIVP]= 0;
+    sample_cmp_pwr[FP_SQRTP]= 0;
+    sample_cmp_pwr[FP_LGP]= 0;
+    sample_cmp_pwr[FP_SINP]= 0;
+    sample_cmp_pwr[FP_EXP]= 0;
+    sample_cmp_pwr[DP_MULP]= 0;
+    sample_cmp_pwr[DP_DIVP]= 0;
+    sample_cmp_pwr[TENSORP]= 0;
+    sample_cmp_pwr[TEXP]= 0;
+  }
+
+  sample_cmp_pwr[SCHEDP]=proc->cores[0]->exu->scheu->rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[L2CP]=(proc->XML->sys.number_of_L2s>0)? proc->l2array[0]->rt_power.readOp.dynamic/(proc->cores[0]->executionTime):0;
+
+  sample_cmp_pwr[MCP]=(proc->mc->rt_power.readOp.dynamic-proc->mc->dram->rt_power.readOp.dynamic)/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[NOCP]=proc->nocs[0]->rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[DRAMP]=proc->mc->dram->rt_power.readOp.dynamic/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[PIPEP]=proc->cores[0]->Pipeline_energy/(proc->cores[0]->executionTime);
+
+  sample_cmp_pwr[IDLE_COREP]=proc->cores[0]->IdleCoreEnergy/(proc->cores[0]->executionTime);
+
+  // This constant dynamic power (e.g., clock power) part is estimated via regression model.
+  sample_cmp_pwr[CONSTP]=0;
+  sample_cmp_pwr[STATICP]=0;
+  // double cnst_dyn = proc->get_const_dynamic_power()/(proc->cores[0]->executionTime);
+  // // If the regression scaling term is greater than the recorded constant dynamic power
+  // // then use the difference (other portion already added to dynamic power). Else,
+  // // all the constant dynamic power is accounted for, add nothing.
+  // if(p->sys.scaling_coefficients[constant_power] > cnst_dyn)
+  //   sample_cmp_pwr[CONSTP] = (p->sys.scaling_coefficients[constant_power]-cnst_dyn);
+  sample_cmp_pwr[CONSTP] = p->sys.scaling_coefficients[constant_power];
+  sample_cmp_pwr[STATICP] = calculate_static_power();
+
+  if(g_dvfs_enabled){
+  	double voltage_ratio = modeled_chip_voltage/p->sys.modeled_chip_voltage_ref; 
+  	sample_cmp_pwr[IDLE_COREP] *= voltage_ratio; // static power scaled by voltage_ratio
+  	sample_cmp_pwr[STATICP] *= voltage_ratio;  // static power scaled by voltage_ratio
+  	for(unsigned i=0; i<num_pwr_cmps; i++){
+    	if((i != IDLE_COREP) && (i != STATICP)){ 
+    		sample_cmp_pwr[i] *= voltage_ratio*voltage_ratio; // dynamic power scaled by square of voltage_ratio
+    	}
+  	}
+  }
+  
+  proc_power+=sample_cmp_pwr[CONSTP]+sample_cmp_pwr[STATICP];
+  if(!g_dvfs_enabled){ // sanity check will fail when voltage scaling is applied, fix later
+	  double sum_pwr_cmp=0;
+	  for(unsigned i=0; i<num_pwr_cmps; i++){
+	    sum_pwr_cmp+=sample_cmp_pwr[i];
+	  }
+	  bool check=false;
+	  check=sanity_check(sum_pwr_cmp,proc_power);
+	  if(!check)
+	    printf("sum_pwr_cmp %f : proc_power %f \n",sum_pwr_cmp,proc_power);
+	  assert("Total Power does not equal the sum of the components\n" && (check));
+  }
+}
+
+void gpgpu_sim_wrapper::compute() { proc->compute(); }
+void gpgpu_sim_wrapper::print_power_kernel_stats(
+    double gpu_sim_cycle, double gpu_tot_sim_cycle, double init_value,
+    const std::string& kernel_info_string, bool print_trace) {
+  detect_print_steady_state(1, init_value);
+  if (g_power_simulation_enabled) {
+    powerfile << kernel_info_string << std::endl;
+
+    sanity_check((kernel_power.avg * kernel_sample_count), kernel_tot_power);
+    powerfile << "Kernel Average Power Data:" << std::endl;
+    powerfile << "kernel_avg_power = " << kernel_power.avg << std::endl;
+
+    for (unsigned i = 0; i < num_pwr_cmps; ++i) {
+      powerfile << "gpu_avg_" << pwr_cmp_label[i] << " = "
+                << kernel_cmp_pwr[i].avg / kernel_sample_count << std::endl;
+    }
+    for (unsigned i = 0; i < num_perf_counters; ++i) {
+      powerfile << "gpu_avg_" << perf_count_label[i] << " = "
+                << kernel_cmp_perf_counters[i].avg / kernel_sample_count
+                << std::endl;
+    }
+
+    powerfile << "gpu_avg_threads_per_warp = "
+                << avg_threads_per_warp_tot / (double)kernel_sample_count
+                << std::endl;
+
+    for (unsigned i = 0; i < num_perf_counters; ++i) {
+      powerfile << "gpu_tot_" << perf_count_label[i] << " = "
+                << kernel_cmp_perf_counters[i].avg
+                << std::endl;
+    }
+
+    powerfile << std::endl << "Kernel Maximum Power Data:" << std::endl;
+    powerfile << "kernel_max_power = " << kernel_power.max << std::endl;
+    for (unsigned i = 0; i < num_pwr_cmps; ++i) {
+      powerfile << "gpu_max_" << pwr_cmp_label[i] << " = "
+                << kernel_cmp_pwr[i].max << std::endl;
+    }
+    for (unsigned i = 0; i < num_perf_counters; ++i) {
+      powerfile << "gpu_max_" << perf_count_label[i] << " = "
+                << kernel_cmp_perf_counters[i].max << std::endl;
+    }
+
+    powerfile << std::endl << "Kernel Minimum Power Data:" << std::endl;
+    powerfile << "kernel_min_power = " << kernel_power.min << std::endl;
+    for (unsigned i = 0; i < num_pwr_cmps; ++i) {
+      powerfile << "gpu_min_" << pwr_cmp_label[i] << " = "
+                << kernel_cmp_pwr[i].min << std::endl;
+    }
+    for (unsigned i = 0; i < num_perf_counters; ++i) {
+      powerfile << "gpu_min_" << perf_count_label[i] << " = "
+                << kernel_cmp_perf_counters[i].min << std::endl;
+    }
+
+    powerfile << std::endl
+              << "Accumulative Power Statistics Over Previous Kernels:"
+              << std::endl;
+    powerfile << "gpu_tot_avg_power = "
+              << gpu_tot_power.avg / total_sample_count << std::endl;
+    powerfile << "gpu_tot_max_power = " << gpu_tot_power.max << std::endl;
+    powerfile << "gpu_tot_min_power = " << gpu_tot_power.min << std::endl;
+    powerfile << std::endl << std::endl;
+    powerfile.flush();
+
+    if (print_trace) {
+      print_trace_files();
+    }
+  }
+}
+void gpgpu_sim_wrapper::dump() {
+  if (g_power_per_cycle_dump) proc->displayEnergy(2, 5);
+}
+
+void gpgpu_sim_wrapper::print_steady_state(int position, double init_val) {
+  double temp_avg = sample_val / (double)samples.size();
+  double temp_ipc = (init_val - init_inst_val) /
+                    (double)(samples.size() * gpu_stat_sample_freq);
+
+  if ((samples.size() >
+       gpu_steady_min_period)) {  // If steady state occurred for some time,
+                                  // print to file
+    has_written_avg = true;
+    gzprintf(steady_state_tacking_file, "%u,%d,%f,%f,", sample_start,
+             total_sample_count, temp_avg, temp_ipc);
+    for (unsigned i = 0; i < num_perf_counters; ++i) {
+      gzprintf(steady_state_tacking_file, "%f,",
+               samples_counter.at(i) / ((double)samples.size()));
+    }
+    gzprintf(steady_state_tacking_file, "\n");
+  } else {
+    if (!has_written_avg && position)
+      gzprintf(steady_state_tacking_file,
+               "ERROR! Not enough steady state points to generate average\n");
+  }
+
+  sample_start = 0;
+  sample_val = 0;
+  init_inst_val = init_val;
+  samples.clear();
+  samples_counter.clear();
+  pwr_counter.clear();
+  assert(samples.size() == 0);
+}
+
+void gpgpu_sim_wrapper::detect_print_steady_state(int position,
+                                                  double init_val) {
+  // Calculating Average
+  if (g_power_simulation_enabled && g_steady_power_levels_enabled) {
+    steady_state_tacking_file = gzopen(g_steady_state_tracking_filename, "a");
+    if (position == 0) {
+      if (samples.size() == 0) {
+        // First sample
+        sample_start = total_sample_count;
+        sample_val = proc->rt_power.readOp.dynamic;
+        init_inst_val = init_val;
+        samples.push_back(proc->rt_power.readOp.dynamic);
+        assert(samples_counter.size() == 0);
+        assert(pwr_counter.size() == 0);
+
+        for (unsigned i = 0; i < (num_perf_counters); ++i) {
+          samples_counter.push_back(sample_perf_counters[i]);
+        }
+
+        for (unsigned i = 0; i < (num_pwr_cmps); ++i) {
+          pwr_counter.push_back(sample_cmp_pwr[i]);
+        }
+        assert(pwr_counter.size() == (double)num_pwr_cmps);
+        assert(samples_counter.size() == (double)num_perf_counters);
+      } else {
+        // Get current average
+        double temp_avg = sample_val / (double)samples.size();
+
+        if (abs(proc->rt_power.readOp.dynamic - temp_avg) <
+            gpu_steady_power_deviation) {  // Value is within threshold
+          sample_val += proc->rt_power.readOp.dynamic;
+          samples.push_back(proc->rt_power.readOp.dynamic);
+          for (unsigned i = 0; i < (num_perf_counters); ++i) {
+            samples_counter.at(i) += sample_perf_counters[i];
+          }
+
+          for (unsigned i = 0; i < (num_pwr_cmps); ++i) {
+            pwr_counter.at(i) += sample_cmp_pwr[i];
+          }
+
+        } else {  // Value exceeds threshold, not considered steady state
+          print_steady_state(position, init_val);
+        }
+      }
+    } else {
+      print_steady_state(position, init_val);
+    }
+    gzclose(steady_state_tacking_file);
+  }
+}
+
+void gpgpu_sim_wrapper::open_files() {
+  if (g_power_simulation_enabled) {
+    if (g_power_trace_enabled) {
+      power_trace_file = gzopen(g_power_trace_filename, "a");
+      metric_trace_file = gzopen(g_metric_trace_filename, "a");
+    }
+  }
+}
+void gpgpu_sim_wrapper::close_files() {
+  if (g_power_simulation_enabled) {
+    if (g_power_trace_enabled) {
+      gzclose(power_trace_file);
+      gzclose(metric_trace_file);
+    }
+  }
+}
diff --git a/src/gpuwattch/gpgpu_sim_wrapper.h b/src/accelwattch/gpgpu_sim_wrapper.h
index 00e4f07..33c4b72 100644
--- a/src/gpuwattch/gpgpu_sim_wrapper.h
+++ b/src/accelwattch/gpgpu_sim_wrapper.h
@@ -1,18 +1,19 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Tayler Hetherington, Ahmed ElTantawy,
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Tayler Hetherington, Ahmed ElTantawy, Vijay Kandiah, Nikos Hardavellas
+// The University of British Columbia, Northwestern University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -54,9 +55,34 @@ struct avg_max_min_counters {
   }
 };
 
+#ifndef COEFF_STRUCT
+#define COEFF_STRUCT
+
+struct PowerscalingCoefficients{
+    double int_coeff;
+    double int_mul_coeff;
+    double int_mul24_coeff;
+    double int_mul32_coeff;
+    double int_div_coeff;
+    double fp_coeff;
+    double dp_coeff;
+    double fp_mul_coeff;
+    double fp_div_coeff;
+    double dp_mul_coeff;
+    double dp_div_coeff;
+    double sqrt_coeff;
+    double log_coeff;
+    double sin_coeff;
+    double exp_coeff;
+    double tensor_coeff;
+    double tex_coeff;
+};
+
+#endif
+
 class gpgpu_sim_wrapper {
  public:
-  gpgpu_sim_wrapper(bool power_simulation_enabled, char* xmlfile);
+  gpgpu_sim_wrapper(bool power_simulation_enabled, char* xmlfile, int power_simulation_mode, bool dvfs_enabled);
   ~gpgpu_sim_wrapper();
 
   void init_mcpat(char* xmlfile, char* powerfile, char* power_trace_file,
@@ -64,7 +90,9 @@ class gpgpu_sim_wrapper {
                   bool power_sim_enabled, bool trace_enabled,
                   bool steady_state_enabled, bool power_per_cycle_dump,
                   double steady_power_deviation, double steady_min_period,
-                  int zlevel, double init_val, int stat_sample_freq);
+                  int zlevel, double init_val, int stat_sample_freq, int power_sim_mode, 
+                  bool dvfs_enabled, unsigned clock_freq, unsigned num_shaders);
+  void init_mcpat_hw_mode(unsigned gpu_sim_cycle);
   void detect_print_steady_state(int position, double init_val);
   void close_files();
   void open_files();
@@ -72,6 +100,7 @@ class gpgpu_sim_wrapper {
   void dump();
   void print_trace_files();
   void update_components_power();
+  double calculate_static_power();
   void update_coefficients();
   void reset_counters();
   void print_power_kernel_stats(double gpu_sim_cycle, double gpu_tot_sim_cycle,
@@ -79,6 +108,7 @@ class gpgpu_sim_wrapper {
                                 const std::string& kernel_info_string,
                                 bool print_trace);
   void power_metrics_calculations();
+  void set_model_voltage(double model_voltage);
   void set_inst_power(bool clk_gated_lanes, double tot_cycles,
                       double busy_cycles, double tot_inst, double int_inst,
                       double fp_inst, double load_inst, double store_inst,
@@ -92,16 +122,31 @@ class gpgpu_sim_wrapper {
                          double write_accesses, double write_misses);
   void set_l2cache_power(double read_accesses, double read_misses,
                          double write_accesses, double write_misses);
+  void set_num_cores(double num_core);
   void set_idle_core_power(double num_idle_core);
   void set_duty_cycle_power(double duty_cycle);
   void set_mem_ctrl_power(double reads, double writes, double dram_precharge);
   void set_exec_unit_power(double fpu_accesses, double ialu_accesses,
                            double sfu_accesses);
+  void set_int_accesses(double ialu_accesses, double imul24_accesses, 
+                        double imul32_accesses, double imul_accesses, 
+                        double idiv_accesses);
+  void set_dp_accesses(double dpu_accesses, double dpmul_accesses, 
+                       double dpdiv_accesses);
+  void set_fp_accesses(double fpu_accesses, double fpmul_accesses, 
+                       double fpdiv_accesses);
+  void set_trans_accesses(double sqrt_accesses, double log_accesses, 
+                       double sin_accesses, double exp_accesses);
+  void set_tensor_accesses(double tensor_accesses);
+  void set_tex_accesses(double tex_accesses);
+  void set_avg_active_threads(float active_threads);
   void set_active_lanes_power(double sp_avg_active_lane,
                               double sfu_avg_active_lane);
-  void set_NoC_power(double noc_tot_reads, double noc_tot_write);
+  void set_NoC_power(double noc_tot_acc);
   bool sanity_check(double a, double b);
 
+  PowerscalingCoefficients * get_scaling_coeffs();
+
  private:
   void print_steady_state(int position, double init_val);
 
@@ -109,8 +154,10 @@ class gpgpu_sim_wrapper {
   ParseXML* p;
   // power parameters
   double const_dynamic_power;
+  double avg_threads_per_warp_tot;
   double proc_power;
-
+  double num_cores;
+  double num_idle_cores;
   unsigned num_perf_counters;  // # of performance counters
   unsigned num_pwr_cmps;       // # of components modelled
   int kernel_sample_count;     // # of samples per kernel
@@ -140,6 +187,10 @@ class gpgpu_sim_wrapper {
   unsigned sample_start;
   double sample_val;
   double init_inst_val;
+  double tot_sfu_accesses;
+  double tot_fpu_accesses;
+  double modeled_chip_voltage;
+  unsigned avg_threads_per_warp;
   std::vector<double> samples;
   std::vector<double> samples_counter;
   std::vector<double> pwr_counter;
@@ -150,6 +201,8 @@ class gpgpu_sim_wrapper {
   char* g_metric_trace_filename;
   char* g_steady_state_tracking_filename;
   bool g_power_simulation_enabled;
+  int g_power_simulation_mode;
+  bool g_dvfs_enabled;
   bool g_steady_power_levels_enabled;
   bool g_power_trace_enabled;
   bool g_power_per_cycle_dump;
diff --git a/src/gpuwattch/gpgpu_static.xml b/src/accelwattch/gpgpu_static.xml
index befa95e..befa95e 100644
--- a/src/gpuwattch/gpgpu_static.xml
+++ b/src/accelwattch/gpgpu_static.xml
diff --git a/src/gpuwattch/interconnect.cc b/src/accelwattch/interconnect.cc
index caf66b3..caf66b3 100644
--- a/src/gpuwattch/interconnect.cc
+++ b/src/accelwattch/interconnect.cc
diff --git a/src/gpuwattch/interconnect.h b/src/accelwattch/interconnect.h
index b725c1d..b725c1d 100644
--- a/src/gpuwattch/interconnect.h
+++ b/src/accelwattch/interconnect.h
diff --git a/src/gpuwattch/iocontrollers.cc b/src/accelwattch/iocontrollers.cc
index f5e2502..f5e2502 100644
--- a/src/gpuwattch/iocontrollers.cc
+++ b/src/accelwattch/iocontrollers.cc
diff --git a/src/gpuwattch/iocontrollers.h b/src/accelwattch/iocontrollers.h
index 9d6c48a..9d6c48a 100644
--- a/src/gpuwattch/iocontrollers.h
+++ b/src/accelwattch/iocontrollers.h
diff --git a/src/gpuwattch/logic.cc b/src/accelwattch/logic.cc
index 7f40189..7f40189 100644
--- a/src/gpuwattch/logic.cc
+++ b/src/accelwattch/logic.cc
diff --git a/src/gpuwattch/logic.h b/src/accelwattch/logic.h
index 1e7a23d..1e7a23d 100644
--- a/src/gpuwattch/logic.h
+++ b/src/accelwattch/logic.h
diff --git a/src/gpuwattch/main.cc b/src/accelwattch/main.cc
index 03d3e7c..03d3e7c 100644
--- a/src/gpuwattch/main.cc
+++ b/src/accelwattch/main.cc
diff --git a/src/gpuwattch/makefile b/src/accelwattch/makefile
index 354c9ec..354c9ec 100644
--- a/src/gpuwattch/makefile
+++ b/src/accelwattch/makefile
diff --git a/src/gpuwattch/mcpat.mk b/src/accelwattch/mcpat.mk
index a09c23b..ad2d6c2 100644
--- a/src/gpuwattch/mcpat.mk
+++ b/src/accelwattch/mcpat.mk
@@ -1,5 +1,5 @@
 
-OUTPUT_DIR=$(SIM_OBJ_FILES_DIR)/gpuwattch
+OUTPUT_DIR=$(SIM_OBJ_FILES_DIR)/accelwattch
 TARGET = mcpat
 SHELL = /bin/sh
 .PHONY: all depend clean
diff --git a/src/gpuwattch/mcpatXeonCore.mk b/src/accelwattch/mcpatXeonCore.mk
index 20cf0dd..20cf0dd 100644
--- a/src/gpuwattch/mcpatXeonCore.mk
+++ b/src/accelwattch/mcpatXeonCore.mk
diff --git a/src/gpuwattch/memoryctrl.cc b/src/accelwattch/memoryctrl.cc
index 2abb1d9..2abb1d9 100644
--- a/src/gpuwattch/memoryctrl.cc
+++ b/src/accelwattch/memoryctrl.cc
diff --git a/src/gpuwattch/memoryctrl.h b/src/accelwattch/memoryctrl.h
index 4ac55fc..4ac55fc 100644
--- a/src/gpuwattch/memoryctrl.h
+++ b/src/accelwattch/memoryctrl.h
diff --git a/src/gpuwattch/noc.cc b/src/accelwattch/noc.cc
index b7ccdb3..b7ccdb3 100644
--- a/src/gpuwattch/noc.cc
+++ b/src/accelwattch/noc.cc
diff --git a/src/gpuwattch/noc.h b/src/accelwattch/noc.h
index 3dc3ac2..3dc3ac2 100644
--- a/src/gpuwattch/noc.h
+++ b/src/accelwattch/noc.h
diff --git a/src/gpuwattch/processor.cc b/src/accelwattch/processor.cc
index fc6db46..9e7f5b2 100644
--- a/src/gpuwattch/processor.cc
+++ b/src/accelwattch/processor.cc
@@ -30,11 +30,13 @@
  ***************************************************************************/
 /********************************************************************
  *      Modified by:
- ** Jingwen Leng, Univeristy of Texas, Austin                   * Syed Gilani,
- *University of Wisconsin–Madison                * Tayler Hetherington,
- *University of British Columbia         * Ahmed ElTantawy, University of
- *British Columbia             *
+ * Jingwen Leng, University of Texas, Austin                
+ * Syed Gilani, University of Wisconsin–Madison         
+ * Tayler Hetherington, University of British Columbia
+ * Ahmed ElTantawy, University of British Columbia
+ * Vijay Kandiah, Northwestern University
  ********************************************************************/
+
 #include "processor.h"
 #include <assert.h>
 #include <stdio.h>
@@ -118,7 +120,7 @@ Processor::Processor(ParseXML *XML_interface)
       set_pppm(pppm_t, cores[i]->clockRate * procdynp.numCore, procdynp.numCore,
                procdynp.numCore, procdynp.numCore);
       // set the exClockRate
-      exClockRate = cores[0]->clockRate * 2;  // TODO; get from XML file
+      exClockRate = cores[0]->clockRate;  // TODO; get from XML file
       // cout<<"****EX clock rate:"<<exClockRate<<endl;
       core.power = core.power + cores[i]->power * pppm_t;
       set_pppm(pppm_t, 1 / cores[i]->executionTime, procdynp.numCore,
diff --git a/src/gpuwattch/processor.h b/src/accelwattch/processor.h
index 888ba31..888ba31 100644
--- a/src/gpuwattch/processor.h
+++ b/src/accelwattch/processor.h
diff --git a/src/gpuwattch/quadro.xml b/src/accelwattch/quadro.xml
index 934e027..934e027 100644
--- a/src/gpuwattch/quadro.xml
+++ b/src/accelwattch/quadro.xml
diff --git a/src/gpuwattch/results/Alpha21364 b/src/accelwattch/results/Alpha21364
index 1b3d9e4..1b3d9e4 100644
--- a/src/gpuwattch/results/Alpha21364
+++ b/src/accelwattch/results/Alpha21364
diff --git a/src/gpuwattch/results/Alpha21364_90nm b/src/accelwattch/results/Alpha21364_90nm
index 2a97d77..2a97d77 100644
--- a/src/gpuwattch/results/Alpha21364_90nm
+++ b/src/accelwattch/results/Alpha21364_90nm
diff --git a/src/gpuwattch/results/Penryn b/src/accelwattch/results/Penryn
index af39390..af39390 100644
--- a/src/gpuwattch/results/Penryn
+++ b/src/accelwattch/results/Penryn
diff --git a/src/gpuwattch/results/T1 b/src/accelwattch/results/T1
index f63e51c..f63e51c 100644
--- a/src/gpuwattch/results/T1
+++ b/src/accelwattch/results/T1
diff --git a/src/gpuwattch/results/T1_DC_64 b/src/accelwattch/results/T1_DC_64
index cdb0a1b..cdb0a1b 100644
--- a/src/gpuwattch/results/T1_DC_64
+++ b/src/accelwattch/results/T1_DC_64
diff --git a/src/gpuwattch/results/T1_SBT_64 b/src/accelwattch/results/T1_SBT_64
index ec8968a..ec8968a 100644
--- a/src/gpuwattch/results/T1_SBT_64
+++ b/src/accelwattch/results/T1_SBT_64
diff --git a/src/gpuwattch/results/T1_ST_64 b/src/accelwattch/results/T1_ST_64
index f3d95b5..f3d95b5 100644
--- a/src/gpuwattch/results/T1_ST_64
+++ b/src/accelwattch/results/T1_ST_64
diff --git a/src/gpuwattch/results/T2 b/src/accelwattch/results/T2
index e24701a..e24701a 100644
--- a/src/gpuwattch/results/T2
+++ b/src/accelwattch/results/T2
diff --git a/src/gpuwattch/results/Xeon_core b/src/accelwattch/results/Xeon_core
index 0cc9ae6..0cc9ae6 100644
--- a/src/gpuwattch/results/Xeon_core
+++ b/src/accelwattch/results/Xeon_core
diff --git a/src/gpuwattch/results/Xeon_uncore b/src/accelwattch/results/Xeon_uncore
index 558331c..558331c 100644
--- a/src/gpuwattch/results/Xeon_uncore
+++ b/src/accelwattch/results/Xeon_uncore
diff --git a/src/gpuwattch/sharedcache.cc b/src/accelwattch/sharedcache.cc
index e28202d..e28202d 100644
--- a/src/gpuwattch/sharedcache.cc
+++ b/src/accelwattch/sharedcache.cc
diff --git a/src/gpuwattch/sharedcache.h b/src/accelwattch/sharedcache.h
index c5aba19..c5aba19 100644
--- a/src/gpuwattch/sharedcache.h
+++ b/src/accelwattch/sharedcache.h
diff --git a/src/gpuwattch/technology_xeon_core.cc b/src/accelwattch/technology_xeon_core.cc
index 6f95cc2..6f95cc2 100644
--- a/src/gpuwattch/technology_xeon_core.cc
+++ b/src/accelwattch/technology_xeon_core.cc
diff --git a/src/gpuwattch/version.h b/src/accelwattch/version.h
index 41bd5b9..41bd5b9 100644
--- a/src/gpuwattch/version.h
+++ b/src/accelwattch/version.h
diff --git a/src/gpuwattch/xmlParser.cc b/src/accelwattch/xmlParser.cc
index 8f49b39..8f49b39 100644
--- a/src/gpuwattch/xmlParser.cc
+++ b/src/accelwattch/xmlParser.cc
diff --git a/src/gpuwattch/xmlParser.h b/src/accelwattch/xmlParser.h
index 71a1f57..71a1f57 100644
--- a/src/gpuwattch/xmlParser.h
+++ b/src/accelwattch/xmlParser.h
diff --git a/src/cuda-sim/cuda-sim.cc b/src/cuda-sim/cuda-sim.cc
index 71f0703..680ce79 100644
--- a/src/cuda-sim/cuda-sim.cc
+++ b/src/cuda-sim/cuda-sim.cc
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ali Bakhoda, Wilson W.L. Fung,
-// George L. Yuan, Jimmy Kwa
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Ali Bakhoda, Wilson W.L. Fung,
+// George L. Yuan, Jimmy Kwa, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -588,65 +590,119 @@ void ptx_instruction::set_fp_or_int_archop() {
       oprnd_type = INT_OP;
   }
 }
-void ptx_instruction::set_mul_div_or_other_archop() {
-  sp_op = OTHER_OP;
-  if ((m_opcode != MEMBAR_OP) && (m_opcode != SSY_OP) && (m_opcode != BRA_OP) &&
-      (m_opcode != BAR_OP) && (m_opcode != EXIT_OP) && (m_opcode != NOP_OP) &&
-      (m_opcode != RETP_OP) && (m_opcode != RET_OP) && (m_opcode != CALLP_OP) &&
-      (m_opcode != CALL_OP)) {
-    if (get_type() == F32_TYPE || get_type() == F64_TYPE ||
-        get_type() == FF64_TYPE) {
-      switch (get_opcode()) {
-        case MUL_OP:
-        case MAD_OP:
-          sp_op = FP_MUL_OP;
-          break;
-        case DIV_OP:
-          sp_op = FP_DIV_OP;
-          break;
-        case LG2_OP:
-          sp_op = FP_LG_OP;
-          break;
-        case RSQRT_OP:
-        case SQRT_OP:
-          sp_op = FP_SQRT_OP;
-          break;
-        case RCP_OP:
-          sp_op = FP_DIV_OP;
-          break;
-        case SIN_OP:
-        case COS_OP:
-          sp_op = FP_SIN_OP;
-          break;
-        case EX2_OP:
-          sp_op = FP_EXP_OP;
-          break;
-        default:
-          if ((op == ALU_OP) || (op == TENSOR_CORE_OP)) sp_op = FP__OP;
-          break;
+
+void ptx_instruction::set_mul_div_or_other_archop(){
+  sp_op=OTHER_OP;
+  if((m_opcode != MEMBAR_OP) && (m_opcode != SSY_OP) && (m_opcode != BRA_OP) && (m_opcode != BAR_OP) && (m_opcode != EXIT_OP) && (m_opcode != NOP_OP) && (m_opcode != RETP_OP) && (m_opcode != RET_OP) && (m_opcode != CALLP_OP) && (m_opcode != CALL_OP)){
+    if(get_type() == F64_TYPE || get_type() == FF64_TYPE){
+         switch(get_opcode()){
+            case MUL_OP:
+            case MAD_OP:
+            case FMA_OP:
+                sp_op=DP_MUL_OP;
+               break;
+            case DIV_OP:
+            case REM_OP:
+                sp_op=DP_DIV_OP;
+               break;
+            case RCP_OP:
+                sp_op=DP_DIV_OP;
+               break;
+            case LG2_OP:
+                sp_op=FP_LG_OP;
+               break;
+            case RSQRT_OP:
+            case SQRT_OP:
+                sp_op=FP_SQRT_OP;
+               break;            
+            case SIN_OP:
+            case COS_OP:
+                sp_op=FP_SIN_OP;
+               break;
+            case EX2_OP:
+                sp_op=FP_EXP_OP;
+               break;
+            case MMA_OP:
+                sp_op=TENSOR__OP;
+            break;
+            case TEX_OP:
+                sp_op=TEX__OP;
+            break;
+            default:
+               if((op==DP_OP) || (op==ALU_OP))
+                  sp_op=DP___OP;
+               break;
+         }
       }
-    } else {
-      switch (get_opcode()) {
-        case MUL24_OP:
-        case MAD24_OP:
-          sp_op = INT_MUL24_OP;
-          break;
-        case MUL_OP:
-        case MAD_OP:
-          if (get_type() == U32_TYPE || get_type() == S32_TYPE ||
-              get_type() == B32_TYPE)
-            sp_op = INT_MUL32_OP;
-          else
-            sp_op = INT_MUL_OP;
-          break;
-        case DIV_OP:
-          sp_op = INT_DIV_OP;
-          break;
-        default:
-          if ((op == ALU_OP)) sp_op = INT__OP;
-          break;
+      else if(get_type()==F16_TYPE || get_type()==F32_TYPE){
+         switch(get_opcode()){
+            case MUL_OP:
+            case MAD_OP:
+            case FMA_OP:
+                sp_op=FP_MUL_OP;
+               break;
+            case DIV_OP:
+            case REM_OP:
+                sp_op=FP_DIV_OP;
+               break;
+            case RCP_OP:
+                sp_op=FP_DIV_OP;
+               break;
+            case LG2_OP:
+                sp_op=FP_LG_OP;
+               break;
+            case RSQRT_OP:
+            case SQRT_OP:
+                sp_op=FP_SQRT_OP;
+               break;            
+            case SIN_OP:
+            case COS_OP:
+                sp_op=FP_SIN_OP;
+               break;
+            case EX2_OP:
+                sp_op=FP_EXP_OP;
+               break;
+            case MMA_OP:
+                sp_op=TENSOR__OP;
+            break;
+            case TEX_OP:
+                sp_op=TEX__OP;
+            break;
+            default:
+               if((op==SP_OP) || (op==ALU_OP))
+                  sp_op=FP__OP;
+               break;
+         }
+      }else {
+         switch(get_opcode()){
+            case MUL24_OP:
+            case MAD24_OP:
+                sp_op=INT_MUL24_OP;
+            break;
+            case MUL_OP:
+            case MAD_OP:
+            case FMA_OP:
+               if(get_type()==U32_TYPE || get_type()==S32_TYPE || get_type()==B32_TYPE)
+                   sp_op=INT_MUL32_OP;
+               else
+                   sp_op=INT_MUL_OP;
+            break;
+            case DIV_OP:
+            case REM_OP:
+                sp_op=INT_DIV_OP;
+            break;
+            case MMA_OP:
+                sp_op=TENSOR__OP;
+            break;
+            case TEX_OP:
+                sp_op=TEX__OP;
+            break;
+            default:
+               if((op==INTP_OP) || (op==ALU_OP))
+                   sp_op=INT__OP;
+               break;
+         }
       }
-    }
   }
 }
 
@@ -880,6 +936,7 @@ void ptx_instruction::set_opcode_and_latency() {
     case MAD_OP:
     case MADC_OP:
     case MADP_OP:
+    case FMA_OP:
       // MAD latency
       switch (get_type()) {
         case F32_TYPE:
@@ -903,7 +960,18 @@ void ptx_instruction::set_opcode_and_latency() {
           break;
       }
       break;
+    case MUL24_OP: //MUL24 is performed on mul32 units (with additional instructions for bitmasking) on devices with compute capability >1.x
+      latency = int_latency[2]+1;
+      initiation_interval = int_init[2]+1;
+      op = INTP_OP;
+      break;
+    case MAD24_OP:
+      latency = int_latency[3]+1;
+      initiation_interval = int_init[3]+1;
+      op = INTP_OP;
+      break;
     case DIV_OP:
+    case REM_OP:
       // Floating point only
       op = SFU_OP;
       switch (get_type()) {
diff --git a/src/cuda-sim/instructions.cc b/src/cuda-sim/instructions.cc
index 0b990e8..e22d88a 100644
--- a/src/cuda-sim/instructions.cc
+++ b/src/cuda-sim/instructions.cc
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Wilson W.L. Fung, Ali Bakhoda,
-// Jimmy Kwa, George L. Yuan
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Wilson W.L. Fung, Ali Bakhoda,
+// Jimmy Kwa, George L. Yuan, Vijay Kandiah, Nikos Hardavellas,
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -26,6 +28,7 @@
 // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
+
 #include "instructions.h"
 #include "half.h"
 #include "half.hpp"
@@ -3977,7 +3980,7 @@ void mad_def(const ptx_instruction *pI, ptx_thread_info *thread,
           fesetround(FE_TOWARDZERO);
           break;
         default:
-          assert(0);
+          //assert(0);
           break;
       }
       d.f32 = a.f32 * b.f32 + c.f32;
@@ -4323,11 +4326,8 @@ void mul_impl(const ptx_instruction *pI, ptx_thread_info *thread) {
     case S64_TYPE:
       t.s64 = a.s64 * b.s64;
       assert(!pI->is_wide());
-      assert(!pI->is_hi());
-      if (pI->is_lo())
-        d.s64 = t.s64;
-      else
-        assert(0);
+      //assert(!pI->is_hi());
+      d.s64 = t.s64;
       break;
     case U16_TYPE:
       t.u32 = ((unsigned)a.u16) * ((unsigned)b.u16);
diff --git a/src/cuda-sim/ptx.l b/src/cuda-sim/ptx.l
index 6754045..15b3cf7 100644
--- a/src/cuda-sim/ptx.l
+++ b/src/cuda-sim/ptx.l
@@ -1,32 +1,35 @@
 /*
-Copyright (c) 2009-2011, Tor M. Aamodt
-The University of British Columbia
+Copyright (c) 2009-2021, Tor M. Aamodt, Vijay Kandiah, Nikos Hardavellas, 
+Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+The University of British Columbia, Northwestern University, Purdue University
 All rights reserved.
-
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
 
-Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-Redistributions in binary form must reproduce the above copyright notice, this
-list of conditions and the following disclaimer in the documentation and/or
-other materials provided with the distribution.
-Neither the name of The University of British Columbia nor the names of its
-contributors may be used to endorse or promote products derived from this
-software without specific prior written permission.
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer;
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution;
+3. Neither the names of The University of British Columbia, Northwestern 
+   University nor the names of their contributors may be used to
+   endorse or promote products derived from this software without specific
+   prior written permission.
 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
 */
 
+
 %option nounput
 %option noyywrap
 %option yylineno
@@ -69,6 +72,7 @@ andn	TC; yylval->int_value = ANDN_OP; return OPCODE;
 atom	TC; yylval->int_value = ATOM_OP; return OPCODE;
 bar.warp 	TC; yylval->int_value = NOP_OP; return OPCODE;
 bar 	TC; yylval->int_value = BAR_OP; return OPCODE;
+barrier	TC; yylval->int_value = BAR_OP; return OPCODE;
 bfe     TC; yylval->int_value = BFE_OP; return OPCODE;
 bfi     TC; yylval->int_value = BFI_OP; return OPCODE;
 bfind   TC; yylval->int_value = BFIND_OP; return OPCODE;
@@ -167,14 +171,22 @@ breakaddr  TC; yylval->int_value = BREAKADDR_OP; return OPCODE;
 "CPTX_END"	printf("ENDING CUSTOM PTX.\n"); BEGIN(IN_COMMENT);
 
 <INITIAL,NOT_OPCODE,IN_INST,IN_FUNC_DECL>{
-\.a\.sync TC; yylval->int_value = LOAD_A; return WMMA_DIRECTIVE;
-\.b\.sync TC; yylval->int_value = LOAD_B; return WMMA_DIRECTIVE;
-\.c\.sync TC; yylval->int_value = LOAD_C; return WMMA_DIRECTIVE;
-\.d\.sync TC; yylval->int_value = STORE_D; return WMMA_DIRECTIVE;
-\.mma\.sync TC;yylval->int_value=MMA; return WMMA_DIRECTIVE;
+\.a\.sync\.aligned TC; yylval->int_value = LOAD_A; return WMMA_DIRECTIVE;
+\.b\.sync\.aligned TC; yylval->int_value = LOAD_B; return WMMA_DIRECTIVE;
+\.c\.sync\.aligned TC; yylval->int_value = LOAD_C; return WMMA_DIRECTIVE;
+\.d\.sync\.aligned TC; yylval->int_value = STORE_D; return WMMA_DIRECTIVE;
+\.mma\.sync\.aligned TC;yylval->int_value=MMA; return WMMA_DIRECTIVE;
 
 \.row TC; yylval->int_value = ROW; return LAYOUT;
 \.col TC; yylval->int_value = COL; return LAYOUT;
+\.m16n16k16\.global TC; yylval->int_value = M16N16K16; return CONFIGURATION;
+\.m32n8k16\.global TC; yylval->int_value = M32N8K16; return CONFIGURATION;
+\.m8n32k16\.global TC;  yylval->int_value = M8N32K16; return CONFIGURATION;
+
+\.m16n16k16\.shared TC; yylval->int_value = M16N16K16; return CONFIGURATION;
+\.m32n8k16\.shared TC; yylval->int_value = M32N8K16; return CONFIGURATION;
+\.m8n32k16\.shared TC;  yylval->int_value = M8N32K16; return CONFIGURATION;
+
 \.m16n16k16 TC; yylval->int_value = M16N16K16; return CONFIGURATION;
 \.m32n8k16 TC; yylval->int_value = M32N8K16; return CONFIGURATION;
 \.m8n32k16 TC;  yylval->int_value = M8N32K16; return CONFIGURATION;
@@ -476,4 +488,4 @@ int ptx_error( yyscan_t yyscanner, ptx_recognizer* recognizer, const char *s )
 	fflush(stdout);
 	//exit(1);
 	return 0;
-}
+}
+\ No newline at end of file
diff --git a/src/cuda-sim/ptx_ir.cc b/src/cuda-sim/ptx_ir.cc
index d3da4b5..029cf73 100644
--- a/src/cuda-sim/ptx_ir.cc
+++ b/src/cuda-sim/ptx_ir.cc
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ali Bakhoda, Wilson W.L. Fung,
-// George L. Yuan
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Ali Bakhoda, Wilson W.L. Fung,
+// George L. Yuan, Vijay Kandiah, Nikos Hardavellas,
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -1384,6 +1386,8 @@ ptx_instruction::ptx_instruction(
       case CS_OPTION:
       case LU_OPTION:
       case CV_OPTION:
+      case WB_OPTION: 
+      case WT_OPTION:
         m_cache_option = last_ptx_inst_option;
         break;
       case HALF_OPTION:
diff --git a/src/gpgpu-sim/dram.cc b/src/gpgpu-sim/dram.cc
index ca47c46..662c2ed 100644
--- a/src/gpgpu-sim/dram.cc
+++ b/src/gpgpu-sim/dram.cc
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Wilson W.L. Fung, Ali Bakhoda,
-// Ivan Sham, George L. Yuan,
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Wilson W.L. Fung, Ali Bakhoda,
+// Ivan Sham, George L. Yuan, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -855,7 +857,7 @@ void dram_t::visualizer_print(gzFile visualizer_file) {
 
 void dram_t::set_dram_power_stats(unsigned &cmd, unsigned &activity,
                                   unsigned &nop, unsigned &act, unsigned &pre,
-                                  unsigned &rd, unsigned &wr,
+                                  unsigned &rd, unsigned &wr, unsigned &wr_WB,
                                   unsigned &req) const {
   // Point power performance counters to low-level DRAM counters
   cmd = n_cmd;
@@ -865,6 +867,7 @@ void dram_t::set_dram_power_stats(unsigned &cmd, unsigned &activity,
   pre = n_pre;
   rd = n_rd;
   wr = n_wr;
+  wr_WB = n_wr_WB;
   req = n_req;
 }
 
diff --git a/src/gpgpu-sim/dram.h b/src/gpgpu-sim/dram.h
index 6c212e9..90ea3e4 100644
--- a/src/gpgpu-sim/dram.h
+++ b/src/gpgpu-sim/dram.h
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ivan Sham, Ali Bakhoda,
-// George L. Yuan, Wilson W.L. Fung
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Ivan Sham, Ali Bakhoda,
+// George L. Yuan, Wilson W.L. Fung, Vijay Kandiah, Nikos Hardavellas,
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -135,7 +137,7 @@ class dram_t {
   // Power Model
   void set_dram_power_stats(unsigned &cmd, unsigned &activity, unsigned &nop,
                             unsigned &act, unsigned &pre, unsigned &rd,
-                            unsigned &wr, unsigned &req) const;
+                            unsigned &wr, unsigned &wr_WB, unsigned &req) const;
 
   const memory_config *m_config;
 
diff --git a/src/gpgpu-sim/gpu-cache.cc b/src/gpgpu-sim/gpu-cache.cc
index 7416246..3a5a67d 100644
--- a/src/gpgpu-sim/gpu-cache.cc
+++ b/src/gpgpu-sim/gpu-cache.cc
@@ -1,18 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Tayler Hetherington
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Tayler Hetherington, 
+// Vijay Kandiah, Nikos Hardavellas, Mahmoud Khairy, Junrui Pan,
+// Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -642,6 +645,7 @@ void cache_stats::clear() {
   ///
   for (unsigned i = 0; i < NUM_MEM_ACCESS_TYPE; ++i) {
     std::fill(m_stats[i].begin(), m_stats[i].end(), 0);
+    std::fill(m_stats_pw[i].begin(), m_stats_pw[i].end(), 0);
     std::fill(m_fail_stats[i].begin(), m_fail_stats[i].end(), 0);
   }
   m_cache_port_available_cycles = 0;
diff --git a/src/gpgpu-sim/gpu-cache.h b/src/gpgpu-sim/gpu-cache.h
index 67d084c..4bbf7e2 100644
--- a/src/gpgpu-sim/gpu-cache.h
+++ b/src/gpgpu-sim/gpu-cache.h
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Tayler Hetherington
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Tayler Hetherington, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
diff --git a/src/gpgpu-sim/gpu-sim.cc b/src/gpgpu-sim/gpu-sim.cc
index 56ede05..ee243c1 100644
--- a/src/gpgpu-sim/gpu-sim.cc
+++ b/src/gpgpu-sim/gpu-sim.cc
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Wilson W.L. Fung, George L. Yuan,
-// Ali Bakhoda, Andrew Turner, Ivan Sham
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Wilson W.L. Fung, George L. Yuan,
+// Ali Bakhoda, Andrew Turner, Ivan Sham, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -95,10 +97,11 @@ tr1_hash_map<new_addr_type, unsigned> address_random_interleaving;
 
 #include "mem_latency_stat.h"
 
+
 void power_config::reg_options(class OptionParser *opp) {
-  option_parser_register(opp, "-gpuwattch_xml_file", OPT_CSTR,
-                         &g_power_config_name, "GPUWattch XML file",
-                         "gpuwattch.xml");
+  option_parser_register(opp, "-accelwattch_xml_file", OPT_CSTR,
+                         &g_power_config_name, "AccelWattch XML file",
+                         "accelwattch_sass_sim.xml");
 
   option_parser_register(opp, "-power_simulation_enabled", OPT_BOOL,
                          &g_power_simulation_enabled,
@@ -108,6 +111,92 @@ void power_config::reg_options(class OptionParser *opp) {
                          &g_power_per_cycle_dump,
                          "Dump detailed power output each cycle", "0");
 
+
+
+
+  option_parser_register(opp, "-hw_perf_file_name", OPT_CSTR,
+                         &g_hw_perf_file_name, "Hardware Performance Statistics file",
+                         "hw_perf.csv");
+
+  option_parser_register(opp, "-hw_perf_bench_name", OPT_CSTR,
+                         &g_hw_perf_bench_name, "Kernel Name in Hardware Performance Statistics file",
+                         "");
+
+  option_parser_register(opp, "-power_simulation_mode", OPT_INT32,
+                         &g_power_simulation_mode,
+                         "Switch performance counter input for power simulation (0=Sim, 1=HW, 2=HW-Sim Hybrid)", "0");
+
+  option_parser_register(opp, "-dvfs_enabled", OPT_BOOL,
+                         &g_dvfs_enabled,
+                         "Turn on DVFS for power model", "0");
+  option_parser_register(opp, "-aggregate_power_stats", OPT_BOOL,
+                         &g_aggregate_power_stats,
+                         "Accumulate power across all kernels", "0");
+
+  //Accelwattch Hyrbid Configuration
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L1_RH", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L1_RH],
+                         "Get L1 Read Hits for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L1_RM", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L1_RM],
+                         "Get L1 Read Misses for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L1_WH", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L1_WH],
+                         "Get L1 Write Hits for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L1_WM", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L1_WM],
+                         "Get L1 Write Misses for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L2_RH", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L2_RH],
+                         "Get L2 Read Hits for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L2_RM", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L2_RM],
+                         "Get L2 Read Misses for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L2_WH", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L2_WH],
+                         "Get L2 Write Hits for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_L2_WM", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_L2_WM],
+                         "Get L2 Write Misses for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_CC_ACC", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_CC_ACC],
+                         "Get Constant Cache Acesses for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_SHARED_ACC", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_SHRD_ACC],
+                         "Get Shared Memory Acesses for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_DRAM_RD", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_DRAM_RD],
+                         "Get DRAM Reads for Accelwattch-Hybrid from Accel-Sim", "0");
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_DRAM_WR", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_DRAM_WR],
+                         "Get DRAM Writes for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_NOC", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_NOC],
+                         "Get Interconnect Acesses for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_PIPE_DUTY", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_PIPE_DUTY],
+                         "Get Pipeline Duty Cycle Acesses for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_NUM_SM_IDLE", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_NUM_SM_IDLE],
+                         "Get Number of Idle SMs for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_CYCLES", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_CYCLES],
+                         "Get Executed Cycles for Accelwattch-Hybrid from Accel-Sim", "0");
+
+  option_parser_register(opp, "-accelwattch_hybrid_perfsim_VOLTAGE", OPT_BOOL,
+                         &accelwattch_hybrid_configuration[HW_VOLTAGE],
+                         "Get Chip Voltage for Accelwattch-Hybrid from Accel-Sim", "0");
+
+
   // Output Data Formats
   option_parser_register(
       opp, "-power_trace_enabled", OPT_BOOL, &g_power_trace_enabled,
@@ -835,7 +924,7 @@ gpgpu_sim::gpgpu_sim(const gpgpu_sim_config &config, gpgpu_context *ctx)
 
 #ifdef GPGPUSIM_POWER_MODEL
   m_gpgpusim_wrapper = new gpgpu_sim_wrapper(config.g_power_simulation_enabled,
-                                             config.g_power_config_name);
+                                             config.g_power_config_name, config.g_power_simulation_mode, config.g_dvfs_enabled);
 #endif
 
   m_shader_stats = new shader_core_stats(m_shader_config);
@@ -1010,6 +1099,14 @@ void gpgpu_sim::init() {
   partiton_reqs_in_parallel_util = 0;
   gpu_sim_cycle_parition_util = 0;
 
+// McPAT initialization function. Called on first launch of GPU
+#ifdef GPGPUSIM_POWER_MODEL
+  if (m_config.g_power_simulation_enabled) {
+    init_mcpat(m_config, m_gpgpusim_wrapper, m_config.gpu_stat_sample_freq,
+               gpu_tot_sim_insn, gpu_sim_insn);
+  }
+#endif
+
   reinit_clock_domains();
   gpgpu_ctx->func_sim->set_param_gpgpu_num_shaders(m_config.num_shader());
   for (unsigned i = 0; i < m_shader_config->n_simt_clusters; i++)
@@ -1035,14 +1132,6 @@ void gpgpu_sim::init() {
   }
 
   if (g_network_mode) icnt_init();
-
-    // McPAT initialization function. Called on first launch of GPU
-#ifdef GPGPUSIM_POWER_MODEL
-  if (m_config.g_power_simulation_enabled) {
-    init_mcpat(m_config, m_gpgpusim_wrapper, m_config.gpu_stat_sample_freq,
-               gpu_tot_sim_insn, gpu_sim_insn);
-  }
-#endif
 }
 
 void gpgpu_sim::update_stats() {
@@ -1067,6 +1156,11 @@ void gpgpu_sim::update_stats() {
   gpu_occupancy = occupancy_stats();
 }
 
+PowerscalingCoefficients *gpgpu_sim::get_scaling_coeffs()
+{
+  return m_gpgpusim_wrapper->get_scaling_coeffs();
+}
+
 void gpgpu_sim::print_stats() {
   gpgpu_ctx->stats->ptx_file_line_stats_write_file();
   gpu_print_stat();
@@ -1146,6 +1240,18 @@ std::string gpgpu_sim::executed_kernel_info_string() {
 
   return statout.str();
 }
+
+std::string gpgpu_sim::executed_kernel_name() {
+  std::stringstream statout;  
+  if( m_executed_kernel_names.size() == 1)
+     statout << m_executed_kernel_names[0];
+  else{
+    for (unsigned int k = 0; k < m_executed_kernel_names.size(); k++) {
+      statout << m_executed_kernel_names[k] << " ";
+    }
+  }
+  return statout.str();
+}
 void gpgpu_sim::set_cache_config(std::string kernel_name,
                                  FuncCache cacheConfig) {
   m_special_cache_config[kernel_name] = cacheConfig;
@@ -1326,10 +1432,20 @@ void gpgpu_sim::gpu_print_stat() {
   m_shader_stats->print(stdout);
 #ifdef GPGPUSIM_POWER_MODEL
   if (m_config.g_power_simulation_enabled) {
+    if(m_config.g_power_simulation_mode > 0){
+        //if(!m_config.g_aggregate_power_stats)
+          mcpat_reset_perf_count(m_gpgpusim_wrapper);
+        calculate_hw_mcpat(m_config, getShaderCoreConfig(), m_gpgpusim_wrapper,
+                  m_power_stats, m_config.gpu_stat_sample_freq,
+                  gpu_tot_sim_cycle, gpu_sim_cycle, gpu_tot_sim_insn,
+                  gpu_sim_insn, m_config.g_power_simulation_mode, m_config.g_dvfs_enabled, 
+                  m_config.g_hw_perf_file_name, m_config.g_hw_perf_bench_name, executed_kernel_name(), m_config.accelwattch_hybrid_configuration, m_config.g_aggregate_power_stats);
+    }
     m_gpgpusim_wrapper->print_power_kernel_stats(
         gpu_sim_cycle, gpu_tot_sim_cycle, gpu_tot_sim_insn + gpu_sim_insn,
         kernel_info_str, true);
-    mcpat_reset_perf_count(m_gpgpusim_wrapper);
+    //if(!m_config.g_aggregate_power_stats)
+      mcpat_reset_perf_count(m_gpgpusim_wrapper);
   }
 #endif
 
@@ -1796,6 +1912,7 @@ void gpgpu_sim::cycle() {
           m_power_stats->pwr_mem_stat->n_pre[CURRENT_STAT_IDX][i],
           m_power_stats->pwr_mem_stat->n_rd[CURRENT_STAT_IDX][i],
           m_power_stats->pwr_mem_stat->n_wr[CURRENT_STAT_IDX][i],
+          m_power_stats->pwr_mem_stat->n_wr_WB[CURRENT_STAT_IDX][i],
           m_power_stats->pwr_mem_stat->n_req[CURRENT_STAT_IDX][i]);
     }
   }
@@ -1839,7 +1956,7 @@ void gpgpu_sim::cycle() {
         m_cluster[i]->core_cycle();
         *active_sms += m_cluster[i]->get_n_active_sms();
       }
-      // Update core icnt/cache stats for GPUWattch
+      // Update core icnt/cache stats for AccelWattch
       m_cluster[i]->get_icnt_stats(
           m_power_stats->pwr_mem_stat->n_simt_to_mem[CURRENT_STAT_IDX][i],
           m_power_stats->pwr_mem_stat->n_mem_to_simt[CURRENT_STAT_IDX][i]);
@@ -1869,10 +1986,12 @@ void gpgpu_sim::cycle() {
       // McPAT main cycle (interface with McPAT)
 #ifdef GPGPUSIM_POWER_MODEL
     if (m_config.g_power_simulation_enabled) {
+      if(m_config.g_power_simulation_mode == 0){
       mcpat_cycle(m_config, getShaderCoreConfig(), m_gpgpusim_wrapper,
                   m_power_stats, m_config.gpu_stat_sample_freq,
                   gpu_tot_sim_cycle, gpu_sim_cycle, gpu_tot_sim_insn,
-                  gpu_sim_insn);
+                  gpu_sim_insn, m_config.g_dvfs_enabled);
+      }
     }
 #endif
 
diff --git a/src/gpgpu-sim/gpu-sim.h b/src/gpgpu-sim/gpu-sim.h
index 2e6820d..de69ef8 100644
--- a/src/gpgpu-sim/gpu-sim.h
+++ b/src/gpgpu-sim/gpu-sim.h
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Wilson W.L. Fung
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Wilson W.L. Fung, Vijay Kandiah, Nikos Hardavellas
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -26,6 +28,7 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 
+
 #ifndef GPU_SIM_H
 #define GPU_SIM_H
 
@@ -68,6 +71,29 @@ extern tr1_hash_map<new_addr_type, unsigned> address_random_interleaving;
 
 enum dram_ctrl_t { DRAM_FIFO = 0, DRAM_FRFCFS = 1 };
 
+enum hw_perf_t {
+  HW_BENCH_NAME=0,
+  HW_KERNEL_NAME,
+  HW_L1_RH,
+  HW_L1_RM,
+  HW_L1_WH,
+  HW_L1_WM,
+  HW_CC_ACC,
+  HW_SHRD_ACC,
+  HW_DRAM_RD,
+  HW_DRAM_WR,
+  HW_L2_RH,
+  HW_L2_RM,
+  HW_L2_WH,
+  HW_L2_WM,
+  HW_NOC,
+  HW_PIPE_DUTY,
+  HW_NUM_SM_IDLE,
+  HW_CYCLES,
+  HW_VOLTAGE,
+  HW_TOTAL_STATS
+};
+
 struct power_config {
   power_config() { m_valid = true; }
   void init() {
@@ -82,7 +108,8 @@ struct power_config {
       s++;
     }
     char buf1[1024];
-    snprintf(buf1, 1024, "gpgpusim_power_report__%s.log", date);
+    //snprintf(buf1, 1024, "accelwattch_power_report__%s.log", date);
+    snprintf(buf1, 1024, "accelwattch_power_report.log");
     g_power_filename = strdup(buf1);
     char buf2[1024];
     snprintf(buf2, 1024, "gpgpusim_power_trace_report__%s.log.gz", date);
@@ -94,6 +121,9 @@ struct power_config {
     snprintf(buf4, 1024, "gpgpusim_steady_state_tracking_report__%s.log.gz",
              date);
     g_steady_state_tracking_filename = strdup(buf4);
+    // for(int i =0; i< hw_perf_t::HW_TOTAL_STATS; i++){
+    //   accelwattch_hybrid_configuration[i] = 0;
+    // }
 
     if (g_steady_power_levels_enabled) {
       sscanf(gpu_steady_state_definition, "%lf:%lf",
@@ -125,6 +155,14 @@ struct power_config {
   double gpu_steady_power_deviation;
   double gpu_steady_min_period;
 
+
+  char *g_hw_perf_file_name;
+  char *g_hw_perf_bench_name;
+  int g_power_simulation_mode;
+  bool g_dvfs_enabled;
+  bool g_aggregate_power_stats;
+  bool accelwattch_hybrid_configuration[hw_perf_t::HW_TOTAL_STATS];
+
   // Nonlinear power model
   bool g_use_nonlinear_model;
   char *gpu_nonlinear_model_config;
@@ -357,7 +395,7 @@ class gpgpu_sim_config : public power_config,
 
     m_valid = true;
   }
-
+  unsigned get_core_freq() const { return core_freq; }
   unsigned num_shader() const { return m_shader_config.num_shader(); }
   unsigned num_cluster() const { return m_shader_config.n_simt_clusters; }
   unsigned get_max_concurrent_kernel() const { return max_concurrent_kernel; }
@@ -527,6 +565,7 @@ class gpgpu_sim : public gpgpu_t {
   bool kernel_more_cta_left(kernel_info_t *kernel) const;
   bool hit_max_cta_count() const;
   kernel_info_t *select_kernel();
+  PowerscalingCoefficients *get_scaling_coeffs();
   void decrement_kernel_latency();
 
   const gpgpu_sim_config &get_config() const { return m_config; }
@@ -634,6 +673,7 @@ class gpgpu_sim : public gpgpu_t {
 
   std::string executed_kernel_info_string();  //< format the kernel information
                                               // into a string for stat printout
+  std::string executed_kernel_name();
   void clear_executed_kernel_info();  //< clear the kernel information after
                                       // stat printout
   virtual void createSIMTCluster() = 0;
diff --git a/src/gpgpu-sim/l2cache.cc b/src/gpgpu-sim/l2cache.cc
index f1c761f..44d793c 100644
--- a/src/gpgpu-sim/l2cache.cc
+++ b/src/gpgpu-sim/l2cache.cc
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -388,9 +390,9 @@ void memory_partition_unit::set_done(mem_fetch *mf) {
 
 void memory_partition_unit::set_dram_power_stats(
     unsigned &n_cmd, unsigned &n_activity, unsigned &n_nop, unsigned &n_act,
-    unsigned &n_pre, unsigned &n_rd, unsigned &n_wr, unsigned &n_req) const {
+    unsigned &n_pre, unsigned &n_rd, unsigned &n_wr, unsigned &n_wr_WB, unsigned &n_req) const {
   m_dram->set_dram_power_stats(n_cmd, n_activity, n_nop, n_act, n_pre, n_rd,
-                               n_wr, n_req);
+                               n_wr, n_wr_WB, n_req);
 }
 
 void memory_partition_unit::print(FILE *fp) const {
@@ -664,6 +666,7 @@ void gpgpu_sim::print_dram_stats(FILE *fout) const {
   unsigned pre = 0;
   unsigned rd = 0;
   unsigned wr = 0;
+  unsigned wr_WB = 0;
   unsigned req = 0;
   unsigned tot_cmd = 0;
   unsigned tot_nop = 0;
@@ -675,13 +678,13 @@ void gpgpu_sim::print_dram_stats(FILE *fout) const {
 
   for (unsigned i = 0; i < m_memory_config->m_n_mem; i++) {
     m_memory_partition_unit[i]->set_dram_power_stats(cmd, activity, nop, act,
-                                                     pre, rd, wr, req);
+                                                     pre, rd, wr, wr_WB, req);
     tot_cmd += cmd;
     tot_nop += nop;
     tot_act += act;
     tot_pre += pre;
     tot_rd += rd;
-    tot_wr += wr;
+    tot_wr += wr + wr_WB;
     tot_req += req;
   }
   fprintf(fout, "gpgpu_n_dram_reads = %d\n", tot_rd);
diff --git a/src/gpgpu-sim/l2cache.h b/src/gpgpu-sim/l2cache.h
index beed765..7fa1f29 100644
--- a/src/gpgpu-sim/l2cache.h
+++ b/src/gpgpu-sim/l2cache.h
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Vijay Kandiah, Nikos Hardavellas,
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -95,7 +97,7 @@ class memory_partition_unit {
   // Power model
   void set_dram_power_stats(unsigned &n_cmd, unsigned &n_activity,
                             unsigned &n_nop, unsigned &n_act, unsigned &n_pre,
-                            unsigned &n_rd, unsigned &n_wr,
+                            unsigned &n_rd, unsigned &n_wr, unsigned &n_wr_WB,
                             unsigned &n_req) const;
 
   int global_sub_partition_id_to_local_id(int global_sub_partition_id) const;
diff --git a/src/gpgpu-sim/power_interface.cc b/src/gpgpu-sim/power_interface.cc
index c637d84..470f2f9 100644
--- a/src/gpgpu-sim/power_interface.cc
+++ b/src/gpgpu-sim/power_interface.cc
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -26,8 +28,10 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 
+
 #include "power_interface.h"
 
+
 void init_mcpat(const gpgpu_sim_config &config,
                 class gpgpu_sim_wrapper *wrapper, unsigned stat_sample_freq,
                 unsigned tot_inst, unsigned inst) {
@@ -38,7 +42,11 @@ void init_mcpat(const gpgpu_sim_config &config,
       config.g_power_simulation_enabled, config.g_power_trace_enabled,
       config.g_steady_power_levels_enabled, config.g_power_per_cycle_dump,
       config.gpu_steady_power_deviation, config.gpu_steady_min_period,
-      config.g_power_trace_zlevel, tot_inst + inst, stat_sample_freq);
+      config.g_power_trace_zlevel, tot_inst + inst, stat_sample_freq,  
+      config.g_power_simulation_mode, 
+      config.g_dvfs_enabled,
+      config.get_core_freq()/1000000,
+      config.num_shader());
 }
 
 void mcpat_cycle(const gpgpu_sim_config &config,
@@ -46,7 +54,7 @@ void mcpat_cycle(const gpgpu_sim_config &config,
                  class gpgpu_sim_wrapper *wrapper,
                  class power_stat_t *power_stats, unsigned stat_sample_freq,
                  unsigned tot_cycle, unsigned cycle, unsigned tot_inst,
-                 unsigned inst) {
+                 unsigned inst, bool dvfs_enabled) {
   static bool mcpat_init = true;
 
   if (mcpat_init) {  // If first cycle, don't have any power numbers yet
@@ -55,41 +63,45 @@ void mcpat_cycle(const gpgpu_sim_config &config,
   }
 
   if ((tot_cycle + cycle) % stat_sample_freq == 0) {
+    if(dvfs_enabled){
+      wrapper->set_model_voltage(1); //performance model needs to support this.
+    }
+
     wrapper->set_inst_power(
         shdr_config->gpgpu_clock_gated_lanes, stat_sample_freq,
-        stat_sample_freq, power_stats->get_total_inst(),
-        power_stats->get_total_int_inst(), power_stats->get_total_fp_inst(),
-        power_stats->get_l1d_read_accesses(),
-        power_stats->get_l1d_write_accesses(),
-        power_stats->get_committed_inst());
+        stat_sample_freq, power_stats->get_total_inst(0),
+        power_stats->get_total_int_inst(0), power_stats->get_total_fp_inst(0),
+        power_stats->get_l1d_read_accesses(0),
+        power_stats->get_l1d_write_accesses(0),
+        power_stats->get_committed_inst(0));
 
     // Single RF for both int and fp ops
-    wrapper->set_regfile_power(power_stats->get_regfile_reads(),
-                               power_stats->get_regfile_writes(),
-                               power_stats->get_non_regfile_operands());
+    wrapper->set_regfile_power(power_stats->get_regfile_reads(0),
+                               power_stats->get_regfile_writes(0),
+                               power_stats->get_non_regfile_operands(0));
 
     // Instruction cache stats
-    wrapper->set_icache_power(power_stats->get_inst_c_hits(),
-                              power_stats->get_inst_c_misses());
+    wrapper->set_icache_power(power_stats->get_inst_c_hits(0),
+                              power_stats->get_inst_c_misses(0));
 
     // Constant Cache, shared memory, texture cache
-    wrapper->set_ccache_power(power_stats->get_constant_c_hits(),
-                              power_stats->get_constant_c_misses());
+    wrapper->set_ccache_power(power_stats->get_const_accessess(0), 0); //assuming all HITS in constant cache for now
     wrapper->set_tcache_power(power_stats->get_texture_c_hits(),
                               power_stats->get_texture_c_misses());
-    wrapper->set_shrd_mem_power(power_stats->get_shmem_read_access());
+    wrapper->set_shrd_mem_power(power_stats->get_shmem_access(0));
 
     wrapper->set_l1cache_power(
-        power_stats->get_l1d_read_hits(), power_stats->get_l1d_read_misses(),
-        power_stats->get_l1d_write_hits(), power_stats->get_l1d_write_misses());
+        power_stats->get_l1d_read_hits(0), power_stats->get_l1d_read_misses(0),
+        power_stats->get_l1d_write_hits(0), power_stats->get_l1d_write_misses(0));
 
     wrapper->set_l2cache_power(
-        power_stats->get_l2_read_hits(), power_stats->get_l2_read_misses(),
-        power_stats->get_l2_write_hits(), power_stats->get_l2_write_misses());
+        power_stats->get_l2_read_hits(0), power_stats->get_l2_read_misses(0),
+        power_stats->get_l2_write_hits(0), power_stats->get_l2_write_misses(0));
 
     float active_sms = (*power_stats->m_active_sms) / stat_sample_freq;
     float num_cores = shdr_config->num_shader();
     float num_idle_core = num_cores - active_sms;
+    wrapper->set_num_cores(num_cores);
     wrapper->set_idle_core_power(num_idle_core);
 
     // pipeline power - pipeline_duty_cycle *= percent_active_sms;
@@ -101,38 +113,64 @@ void mcpat_cycle(const gpgpu_sim_config &config,
     wrapper->set_duty_cycle_power(pipeline_duty_cycle);
 
     // Memory Controller
-    wrapper->set_mem_ctrl_power(power_stats->get_dram_rd(),
-                                power_stats->get_dram_wr(),
-                                power_stats->get_dram_pre());
+    wrapper->set_mem_ctrl_power(power_stats->get_dram_rd(0),
+                                power_stats->get_dram_wr(0),
+                                power_stats->get_dram_pre(0));
 
     // Execution pipeline accesses
     // FPU (SP) accesses, Integer ALU (not present in Tesla), Sfu accesses
-    wrapper->set_exec_unit_power(power_stats->get_tot_fpu_accessess(),
-                                 power_stats->get_ialu_accessess(),
-                                 power_stats->get_tot_sfu_accessess());
+
+    wrapper->set_int_accesses(power_stats->get_ialu_accessess(0), 
+                              power_stats->get_intmul24_accessess(0), 
+                              power_stats->get_intmul32_accessess(0), 
+                              power_stats->get_intmul_accessess(0), 
+                              power_stats->get_intdiv_accessess(0));
+
+    wrapper->set_dp_accesses(power_stats->get_dp_accessess(0), 
+                              power_stats->get_dpmul_accessess(0), 
+                              power_stats->get_dpdiv_accessess(0));
+
+    wrapper->set_fp_accesses(power_stats->get_fp_accessess(0), 
+                            power_stats->get_fpmul_accessess(0), 
+                            power_stats->get_fpdiv_accessess(0));
+
+    wrapper->set_trans_accesses(power_stats->get_sqrt_accessess(0), 
+                                power_stats->get_log_accessess(0), 
+                                power_stats->get_sin_accessess(0), 
+                                power_stats->get_exp_accessess(0));
+
+    wrapper->set_tensor_accesses(power_stats->get_tensor_accessess(0));
+
+    wrapper->set_tex_accesses(power_stats->get_tex_accessess(0));
+
+    wrapper->set_exec_unit_power(power_stats->get_tot_fpu_accessess(0),
+                                 power_stats->get_ialu_accessess(0),
+                                 power_stats->get_tot_sfu_accessess(0));
+
+    wrapper->set_avg_active_threads(power_stats->get_active_threads(0));
 
     // Average active lanes for sp and sfu pipelines
     float avg_sp_active_lanes =
         (power_stats->get_sp_active_lanes()) / stat_sample_freq;
     float avg_sfu_active_lanes =
         (power_stats->get_sfu_active_lanes()) / stat_sample_freq;
+    if(avg_sp_active_lanes >32.0 )
+      avg_sp_active_lanes = 32.0;
+    if(avg_sfu_active_lanes >32.0 )
+      avg_sfu_active_lanes = 32.0;
     assert(avg_sp_active_lanes <= 32);
     assert(avg_sfu_active_lanes <= 32);
-    wrapper->set_active_lanes_power(
-        (power_stats->get_sp_active_lanes()) / stat_sample_freq,
-        (power_stats->get_sfu_active_lanes()) / stat_sample_freq);
+    wrapper->set_active_lanes_power(avg_sp_active_lanes, avg_sfu_active_lanes);
 
     double n_icnt_simt_to_mem =
         (double)
-            power_stats->get_icnt_simt_to_mem();  // # flits from SIMT clusters
+            power_stats->get_icnt_simt_to_mem(0);  // # flits from SIMT clusters
                                                   // to memory partitions
     double n_icnt_mem_to_simt =
         (double)
-            power_stats->get_icnt_mem_to_simt();  // # flits from memory
+            power_stats->get_icnt_mem_to_simt(0);  // # flits from memory
                                                   // partitions to SIMT clusters
-    wrapper->set_NoC_power(
-        n_icnt_mem_to_simt,
-        n_icnt_simt_to_mem);  // Number of flits traversing the interconnect
+    wrapper->set_NoC_power(n_icnt_mem_to_simt + n_icnt_simt_to_mem);  // Number of flits traversing the interconnect
 
     wrapper->compute();
 
@@ -152,3 +190,336 @@ void mcpat_cycle(const gpgpu_sim_config &config,
 void mcpat_reset_perf_count(class gpgpu_sim_wrapper *wrapper) {
   wrapper->reset_counters();
 }
+
+bool parse_hw_file(char* hwpowerfile, bool find_target_kernel, vector<string> &hw_data, char* benchname, std::string executed_kernelname){
+  fstream hw_file;
+  hw_file.open(hwpowerfile, ios::in);
+  string line, word, temp;
+  while(!hw_file.eof()){
+    hw_data.clear();
+    getline(hw_file, line);
+    stringstream s(line);
+    while (getline(s,word,',')){
+      hw_data.push_back(word);
+    }
+    if(hw_data[HW_BENCH_NAME] == std::string(benchname)){
+      if(find_target_kernel){
+        if(hw_data[HW_KERNEL_NAME] == ""){
+          hw_file.close();
+          return true;
+        }
+        else{
+          if(hw_data[HW_KERNEL_NAME] == executed_kernelname){
+            hw_file.close();
+            return true;
+          }
+        }
+      }
+      else{
+        hw_file.close();
+        return true;
+      }
+    } 
+  }
+  hw_file.close();
+  return false;
+}
+
+
+void calculate_hw_mcpat(const gpgpu_sim_config &config,
+                 const shader_core_config *shdr_config,
+                 class gpgpu_sim_wrapper *wrapper,
+                 class power_stat_t *power_stats, unsigned stat_sample_freq,
+                 unsigned tot_cycle, unsigned cycle, unsigned tot_inst,
+                 unsigned inst, int power_simulation_mode, bool dvfs_enabled, char* hwpowerfile, 
+                 char* benchname, std::string executed_kernelname, 
+                 const bool *accelwattch_hybrid_configuration, bool aggregate_power_stats){
+
+  /* Reading HW data from CSV file */
+
+  vector<string> hw_data;
+  bool kernel_found = false;
+  kernel_found = parse_hw_file(hwpowerfile, true, hw_data, benchname, executed_kernelname); //Searching for matching executed_kernelname.
+  if(!kernel_found)
+    kernel_found = parse_hw_file(hwpowerfile, false, hw_data, benchname, executed_kernelname); //Searching for any kernel with same benchname. 
+  assert("Could not find perf stats for the target benchmark in hwpowerfile.\n" && (kernel_found));
+  unsigned perf_cycles = static_cast<unsigned int>(std::stod(hw_data[HW_CYCLES]) + 0.5);
+  if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_CYCLES]))
+    perf_cycles = cycle;
+  wrapper->init_mcpat_hw_mode(perf_cycles); //total PERF MODEL cycles for current kernel
+
+  if(dvfs_enabled){
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_VOLTAGE])) 
+      wrapper->set_model_voltage(1); //performance model needs to support this
+    else  
+      wrapper->set_model_voltage(std::stod(hw_data[HW_VOLTAGE])); //performance model needs to support this
+  }
+
+  double l1_read_hits = std::stod(hw_data[HW_L1_RH]);
+  double l1_read_misses = std::stod(hw_data[HW_L1_RM]);
+  double l1_write_hits = std::stod(hw_data[HW_L1_WH]);
+  double l1_write_misses = std::stod(hw_data[HW_L1_WM]);
+
+  if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L1_RH]))
+    l1_read_hits = power_stats->get_l1d_read_hits(1) - power_stats->l1r_hits_kernel;
+  if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L1_RM]))
+    l1_read_misses = power_stats->get_l1d_read_misses(1) - power_stats->l1r_misses_kernel;
+  if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L1_WH]))
+    l1_write_hits = power_stats->get_l1d_write_hits(1) - power_stats->l1w_hits_kernel;
+  if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L1_WM]))
+    l1_write_misses = power_stats->get_l1d_write_misses(1) - power_stats->l1w_misses_kernel;
+
+    if(aggregate_power_stats){
+      power_stats->tot_inst_execution += power_stats->get_total_inst(1);
+      power_stats->tot_int_inst_execution +=  power_stats->get_total_int_inst(1);
+      power_stats->tot_fp_inst_execution +=  power_stats->get_total_fp_inst(1);
+      power_stats->commited_inst_execution += power_stats->get_committed_inst(1);
+      wrapper->set_inst_power(
+        shdr_config->gpgpu_clock_gated_lanes, cycle, //TODO: core.[0] cycles counts don't matter, remove this
+        cycle, power_stats->tot_inst_execution,
+        power_stats->tot_int_inst_execution, power_stats->tot_fp_inst_execution,
+        l1_read_hits + l1_read_misses,
+        l1_write_hits + l1_write_misses,
+        power_stats->commited_inst_execution);
+    }
+    else{
+    wrapper->set_inst_power(
+        shdr_config->gpgpu_clock_gated_lanes, cycle, //TODO: core.[0] cycles counts don't matter, remove this
+        cycle, power_stats->get_total_inst(1),
+        power_stats->get_total_int_inst(1), power_stats->get_total_fp_inst(1),
+        l1_read_hits + l1_read_misses,
+        l1_write_hits + l1_write_misses,
+        power_stats->get_committed_inst(1));
+    }
+
+    // Single RF for both int and fp ops -- activity factor set to 0 for Accelwattch HW and Accelwattch Hybrid because no HW Perf Stats for register files
+    wrapper->set_regfile_power(power_stats->get_regfile_reads(1),
+                               power_stats->get_regfile_writes(1),
+                               power_stats->get_non_regfile_operands(1));
+
+    // Instruction cache stats -- activity factor set to 0 for Accelwattch HW and Accelwattch Hybrid because no HW Perf Stats for instruction cache
+    wrapper->set_icache_power(power_stats->get_inst_c_hits(1) - power_stats->l1i_hits_kernel,
+                              power_stats->get_inst_c_misses(1) - power_stats->l1i_misses_kernel);
+
+    // Constant Cache, shared memory, texture cache
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_CC_ACC]))
+      wrapper->set_ccache_power(power_stats->get_const_accessess(1) - power_stats->cc_accesses_kernel, 0); //assuming all HITS in constant cache for now
+    else  
+      wrapper->set_ccache_power(std::stod(hw_data[HW_CC_ACC]), 0); //assuming all HITS in constant cache for now
+
+    
+    // wrapper->set_tcache_power(power_stats->get_texture_c_hits(),
+    //                           power_stats->get_texture_c_misses());
+
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_SHRD_ACC]))
+      wrapper->set_shrd_mem_power(power_stats->get_shmem_access(1) - power_stats->shared_accesses_kernel);
+    else  
+      wrapper->set_shrd_mem_power(std::stod(hw_data[HW_SHRD_ACC]));
+
+    wrapper->set_l1cache_power( l1_read_hits,  l1_read_misses, l1_write_hits,  l1_write_misses);
+
+    double l2_read_hits = std::stod(hw_data[HW_L2_RH]);
+    double l2_read_misses = std::stod(hw_data[HW_L2_RM]);
+    double l2_write_hits = std::stod(hw_data[HW_L2_WH]);
+    double l2_write_misses = std::stod(hw_data[HW_L2_WM]);
+
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L2_RH]))
+      l2_read_hits = power_stats->get_l2_read_hits(1) - power_stats->l2r_hits_kernel;
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L2_RM]))
+      l2_read_misses = power_stats->get_l2_read_misses(1)  - power_stats->l2r_misses_kernel;
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L2_WH]))
+      l2_write_hits = power_stats->get_l2_write_hits(1) - power_stats->l2w_hits_kernel;
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_L2_WM]))
+      l2_write_misses = power_stats->get_l2_write_misses(1) - power_stats->l2w_misses_kernel;
+
+    wrapper->set_l2cache_power(l2_read_hits, l2_read_misses, l2_write_hits, l2_write_misses);
+    
+    float active_sms = (*power_stats->m_active_sms) / stat_sample_freq;
+    float num_cores = shdr_config->num_shader();
+    float num_idle_core = num_cores - active_sms;
+    wrapper->set_num_cores(num_cores);
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_NUM_SM_IDLE]))
+      wrapper->set_idle_core_power(num_idle_core);
+    else 
+      wrapper->set_idle_core_power(std::stod(hw_data[HW_NUM_SM_IDLE])); 
+
+    float pipeline_duty_cycle =
+        ((*power_stats->m_average_pipeline_duty_cycle / (stat_sample_freq)) <
+         0.8)
+            ? ((*power_stats->m_average_pipeline_duty_cycle) / stat_sample_freq)
+            : 0.8;
+    
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_PIPE_DUTY]))
+      wrapper->set_duty_cycle_power(pipeline_duty_cycle);
+    else
+      wrapper->set_duty_cycle_power(std::stod(hw_data[HW_PIPE_DUTY]));
+
+    // Memory Controller
+  
+    double dram_reads = std::stod(hw_data[HW_DRAM_RD]);
+    double dram_writes = std::stod(hw_data[HW_DRAM_WR]);
+    double dram_pre = 0;
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_DRAM_RD]))
+      dram_reads = power_stats->get_dram_rd(1) - power_stats->dram_rd_kernel;
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_DRAM_WR]))
+      dram_writes = power_stats->get_dram_wr(1) - power_stats->dram_wr_kernel;
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_DRAM_RD]))
+      dram_pre = power_stats->get_dram_pre(1) - power_stats->dram_pre_kernel;
+
+
+    wrapper->set_mem_ctrl_power(dram_reads, dram_writes, dram_pre);
+
+    if(aggregate_power_stats){
+      power_stats->ialu_acc_execution += power_stats->get_ialu_accessess(1);
+      power_stats->imul24_acc_execution += power_stats->get_intmul24_accessess(1);
+      power_stats->imul32_acc_execution += power_stats->get_intmul32_accessess(1);
+      power_stats->imul_acc_execution += power_stats->get_intmul_accessess(1);
+      power_stats->idiv_acc_execution += power_stats->get_intdiv_accessess(1);
+      power_stats->dp_acc_execution += power_stats->get_dp_accessess(1);
+      power_stats->dpmul_acc_execution += power_stats->get_dpmul_accessess(1);
+      power_stats->dpdiv_acc_execution += power_stats->get_dpdiv_accessess(1);
+      power_stats->fp_acc_execution += power_stats->get_fp_accessess(1);
+      power_stats->fpmul_acc_execution += power_stats->get_fpmul_accessess(1);
+      power_stats->fpdiv_acc_execution += power_stats->get_fpdiv_accessess(1);
+      power_stats->sqrt_acc_execution += power_stats->get_sqrt_accessess(1);
+      power_stats->log_acc_execution += power_stats->get_log_accessess(1);
+      power_stats->sin_acc_execution += power_stats->get_sin_accessess(1);
+      power_stats->exp_acc_execution += power_stats->get_exp_accessess(1);
+      power_stats->tensor_acc_execution += power_stats->get_tensor_accessess(1);
+      power_stats->tex_acc_execution += power_stats->get_tex_accessess(1);
+      power_stats->tot_fpu_acc_execution += power_stats->get_tot_fpu_accessess(1);
+      power_stats->tot_sfu_acc_execution += power_stats->get_tot_sfu_accessess(1);
+      power_stats->tot_threads_acc_execution += power_stats->get_tot_threads_kernel(1);
+      power_stats->tot_warps_acc_execution += power_stats->get_tot_warps_kernel(1);
+      
+      power_stats->sp_active_lanes_execution += (power_stats->get_sp_active_lanes() * shdr_config->num_shader() * shdr_config->gpgpu_num_sp_units);
+      power_stats->sfu_active_lanes_execution += (power_stats->get_sfu_active_lanes() * shdr_config->num_shader() * shdr_config->gpgpu_num_sp_units);
+
+      wrapper->set_int_accesses(power_stats->ialu_acc_execution, 
+                                power_stats->imul24_acc_execution, 
+                                power_stats->imul32_acc_execution, 
+                                power_stats->imul_acc_execution, 
+                                power_stats->idiv_acc_execution);
+
+      wrapper->set_dp_accesses(power_stats->dp_acc_execution, 
+                                power_stats->dpmul_acc_execution, 
+                                power_stats->dpdiv_acc_execution);
+
+      wrapper->set_fp_accesses(power_stats->fp_acc_execution, 
+                              power_stats->fpmul_acc_execution, 
+                              power_stats->fpdiv_acc_execution);
+
+      wrapper->set_trans_accesses(power_stats->sqrt_acc_execution, 
+                                  power_stats->log_acc_execution, 
+                                  power_stats->sin_acc_execution, 
+                                  power_stats->exp_acc_execution);
+
+      wrapper->set_tensor_accesses(power_stats->tensor_acc_execution);
+
+      wrapper->set_tex_accesses(power_stats->tex_acc_execution);
+
+      wrapper->set_exec_unit_power(power_stats->ialu_acc_execution,
+                                   power_stats->tot_fpu_acc_execution,
+                                   power_stats->tot_sfu_acc_execution);
+
+      wrapper->set_avg_active_threads((double)((double)power_stats->tot_threads_acc_execution / (double)power_stats->tot_warps_acc_execution));
+
+      // Average active lanes for sp and sfu pipelines
+      float avg_sp_active_lanes =
+          (power_stats->sp_active_lanes_execution) / shdr_config->num_shader() / shdr_config->gpgpu_num_sp_units / stat_sample_freq;
+      float avg_sfu_active_lanes =
+          (power_stats->sfu_active_lanes_execution) / shdr_config->num_shader() / shdr_config->gpgpu_num_sp_units / stat_sample_freq;
+      if(avg_sp_active_lanes >32.0 )
+        avg_sp_active_lanes = 32.0;
+      if(avg_sfu_active_lanes >32.0 )
+        avg_sfu_active_lanes = 32.0;
+      assert(avg_sp_active_lanes <= 32);
+      assert(avg_sfu_active_lanes <= 32);
+      wrapper->set_active_lanes_power(avg_sp_active_lanes, avg_sfu_active_lanes);
+    }
+    else{
+      wrapper->set_int_accesses(power_stats->get_ialu_accessess(1), 
+                                power_stats->get_intmul24_accessess(1), 
+                                power_stats->get_intmul32_accessess(1), 
+                                power_stats->get_intmul_accessess(1), 
+                                power_stats->get_intdiv_accessess(1));
+
+      wrapper->set_dp_accesses(power_stats->get_dp_accessess(1), 
+                                power_stats->get_dpmul_accessess(1), 
+                                power_stats->get_dpdiv_accessess(1));
+
+      wrapper->set_fp_accesses(power_stats->get_fp_accessess(1), 
+                              power_stats->get_fpmul_accessess(1), 
+                              power_stats->get_fpdiv_accessess(1));
+
+      wrapper->set_trans_accesses(power_stats->get_sqrt_accessess(1), 
+                                  power_stats->get_log_accessess(1), 
+                                  power_stats->get_sin_accessess(1), 
+                                  power_stats->get_exp_accessess(1));
+
+      wrapper->set_tensor_accesses(power_stats->get_tensor_accessess(1));
+
+      wrapper->set_tex_accesses(power_stats->get_tex_accessess(1));
+
+      wrapper->set_exec_unit_power(power_stats->get_tot_fpu_accessess(1),
+                                   power_stats->get_ialu_accessess(1),
+                                   power_stats->get_tot_sfu_accessess(1));
+
+      wrapper->set_avg_active_threads(power_stats->get_active_threads(1));
+
+      // Average active lanes for sp and sfu pipelines
+      float avg_sp_active_lanes =
+          (power_stats->get_sp_active_lanes()) / stat_sample_freq;
+      float avg_sfu_active_lanes =
+          (power_stats->get_sfu_active_lanes()) / stat_sample_freq;
+      if(avg_sp_active_lanes >32.0 )
+        avg_sp_active_lanes = 32.0;
+      if(avg_sfu_active_lanes >32.0 )
+        avg_sfu_active_lanes = 32.0;
+      assert(avg_sp_active_lanes <= 32);
+      assert(avg_sfu_active_lanes <= 32);
+      wrapper->set_active_lanes_power(avg_sp_active_lanes, avg_sfu_active_lanes);
+    }
+
+  
+    double n_icnt_simt_to_mem =
+      (double)
+          (power_stats->get_icnt_simt_to_mem(1) - power_stats->noc_tr_kernel);  // # flits from SIMT clusters
+                                                // to memory partitions
+    double n_icnt_mem_to_simt =
+      (double)
+          (power_stats->get_icnt_mem_to_simt(1)- power_stats->noc_rc_kernel);  // # flits from memory
+                                                // partitions to SIMT clusters
+    if((power_simulation_mode == 2) && (accelwattch_hybrid_configuration[HW_NOC]))   
+      wrapper->set_NoC_power(n_icnt_mem_to_simt + n_icnt_simt_to_mem);  // Number of flits traversing the interconnect from Accel-Sim
+    else
+      wrapper->set_NoC_power(std::stod(hw_data[HW_NOC]));  // Number of flits traversing the interconnect from HW
+   
+    wrapper->compute();
+
+    wrapper->update_components_power();
+
+    wrapper->power_metrics_calculations();
+
+    wrapper->dump();
+    power_stats->l1r_hits_kernel = power_stats->get_l1d_read_hits(1);
+    power_stats->l1r_misses_kernel = power_stats->get_l1d_read_misses(1);
+    power_stats->l1w_hits_kernel = power_stats->get_l1d_write_hits(1);
+    power_stats->l1w_misses_kernel = power_stats->get_l1d_write_misses(1);
+    power_stats->shared_accesses_kernel = power_stats->get_const_accessess(1);
+    power_stats->cc_accesses_kernel = power_stats->get_shmem_access(1);
+    power_stats->dram_rd_kernel = power_stats->get_dram_rd(1);
+    power_stats->dram_wr_kernel = power_stats->get_dram_wr(1);
+    power_stats->dram_pre_kernel = power_stats->get_dram_pre(1);
+    power_stats->l1i_hits_kernel = power_stats->get_inst_c_hits(1);
+    power_stats->l1i_misses_kernel = power_stats->get_inst_c_misses(1);
+    power_stats->l2r_hits_kernel = power_stats->get_l2_read_hits(1);
+    power_stats->l2r_misses_kernel = power_stats->get_l2_read_misses(1);
+    power_stats->l2w_hits_kernel =  power_stats->get_l2_write_hits(1); 
+    power_stats->l2w_misses_kernel = power_stats->get_l2_write_misses(1);
+    power_stats->noc_tr_kernel = power_stats->get_icnt_simt_to_mem(1);
+    power_stats->noc_rc_kernel =  power_stats->get_icnt_mem_to_simt(1);
+
+
+    power_stats->clear();
+}
+\ No newline at end of file
diff --git a/src/gpgpu-sim/power_interface.h b/src/gpgpu-sim/power_interface.h
index 2bfd4d5..1c6c510 100644
--- a/src/gpgpu-sim/power_interface.h
+++ b/src/gpgpu-sim/power_interface.h
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -43,7 +45,19 @@ void mcpat_cycle(const gpgpu_sim_config &config,
                  class gpgpu_sim_wrapper *wrapper,
                  class power_stat_t *power_stats, unsigned stat_sample_freq,
                  unsigned tot_cycle, unsigned cycle, unsigned tot_inst,
-                 unsigned inst);
+                 unsigned inst, bool dvfs_enabled);
+
+void calculate_hw_mcpat(const gpgpu_sim_config &config,
+                 const shader_core_config *shdr_config,
+                 class gpgpu_sim_wrapper *wrapper,
+                 class power_stat_t *power_stats, unsigned stat_sample_freq,
+                 unsigned tot_cycle, unsigned cycle, unsigned tot_inst,
+                 unsigned inst, int power_simulation_mode, bool dvfs_enabled, 
+                 char* hwpowerfile, char* benchname, std::string executed_kernelname, 
+                 const bool *accelwattch_hybrid_configuration, bool aggregate_power_stats);
+
+bool parse_hw_file(char* hwpowerfile, bool find_target_kernel, vector<string> &hw_data, char* benchname, std::string executed_kernelname);
+
 void mcpat_reset_perf_count(class gpgpu_sim_wrapper *wrapper);
 
 #endif /* POWER_INTERFACE_H_ */
diff --git a/src/gpgpu-sim/power_stat.cc b/src/gpgpu-sim/power_stat.cc
index 7b60ddf..d0e673c 100644
--- a/src/gpgpu-sim/power_stat.cc
+++ b/src/gpgpu-sim/power_stat.cc
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington
-// The University of British Columbia
+// Copyright (c) 2009-2021,  Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -54,10 +56,64 @@ power_mem_stat_t::power_mem_stat_t(const memory_config *mem_config,
   init();
 }
 
+void power_stat_t::clear(){
+  for(unsigned i=0; i< NUM_STAT_IDX; ++i){
+    pwr_mem_stat->core_cache_stats[i].clear();
+    pwr_mem_stat->l2_cache_stats[i].clear();
+    for(unsigned j=0; j<m_config->num_shader(); ++j){
+      pwr_core_stat->m_pipeline_duty_cycle[i][j]=0;                
+      pwr_core_stat->m_num_decoded_insn[i][j]=0;
+      pwr_core_stat->m_num_FPdecoded_insn[i][j]=0;
+      pwr_core_stat->m_num_INTdecoded_insn[i][j]=0;
+      pwr_core_stat->m_num_storequeued_insn[i][j]=0;
+      pwr_core_stat->m_num_loadqueued_insn[i][j]=0;
+      pwr_core_stat->m_num_tex_inst[i][j]=0;
+      pwr_core_stat->m_num_ialu_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_fp_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_imul_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_imul24_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_imul32_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_fpmul_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_idiv_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_fpdiv_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_dp_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_dpmul_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_dpdiv_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_tensor_core_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_const_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_tex_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_sp_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_sfu_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_sqrt_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_log_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_sin_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_exp_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_mem_acesses[i][j]=0;                   
+      pwr_core_stat->m_num_sp_committed[i][j]=0;
+      pwr_core_stat->m_num_sfu_committed[i][j]=0;
+      pwr_core_stat->m_num_mem_committed[i][j]=0;
+      pwr_core_stat->m_read_regfile_acesses[i][j]=0;
+      pwr_core_stat->m_write_regfile_acesses[i][j]=0;
+      pwr_core_stat->m_non_rf_operands[i][j]=0;
+      pwr_core_stat->m_active_sp_lanes[i][j]=0;
+      pwr_core_stat->m_active_sfu_lanes[i][j]=0;
+      pwr_core_stat->m_active_exu_threads[i][j]=0;                   
+      pwr_core_stat->m_active_exu_warps[i][j]=0;
+    }
+    for (unsigned j = 0; j < m_mem_config->m_n_mem; ++j) {
+      pwr_mem_stat->n_rd[i][j]=0;
+      pwr_mem_stat->n_wr[i][j]=0;
+      pwr_mem_stat->n_pre[i][j]=0;
+    }
+  }
+}
+
+
+
 void power_mem_stat_t::init() {
-  shmem_read_access[CURRENT_STAT_IDX] =
+  shmem_access[CURRENT_STAT_IDX] =
       m_core_stats->gpgpu_n_shmem_bank_access;  // Shared memory access
-  shmem_read_access[PREV_STAT_IDX] =
+  shmem_access[PREV_STAT_IDX] =
       (unsigned *)calloc(m_core_config->num_shader(), sizeof(unsigned));
 
   for (unsigned i = 0; i < NUM_STAT_IDX; ++i) {
@@ -71,6 +127,7 @@ void power_mem_stat_t::init() {
     n_pre[i] = (unsigned *)calloc(m_config->m_n_mem, sizeof(unsigned));
     n_rd[i] = (unsigned *)calloc(m_config->m_n_mem, sizeof(unsigned));
     n_wr[i] = (unsigned *)calloc(m_config->m_n_mem, sizeof(unsigned));
+    n_wr_WB[i] = (unsigned *)calloc(m_config->m_n_mem, sizeof(unsigned));
     n_req[i] = (unsigned *)calloc(m_config->m_n_mem, sizeof(unsigned));
 
     // Interconnect stats
@@ -86,8 +143,8 @@ void power_mem_stat_t::save_stats() {
   l2_cache_stats[PREV_STAT_IDX] = l2_cache_stats[CURRENT_STAT_IDX];
 
   for (unsigned i = 0; i < m_core_config->num_shader(); ++i) {
-    shmem_read_access[PREV_STAT_IDX][i] =
-        shmem_read_access[CURRENT_STAT_IDX][i];  // Shared memory access
+    shmem_access[PREV_STAT_IDX][i] =
+        shmem_access[CURRENT_STAT_IDX][i];  // Shared memory access
   }
 
   for (unsigned i = 0; i < m_config->m_n_mem; ++i) {
@@ -98,6 +155,7 @@ void power_mem_stat_t::save_stats() {
     n_pre[PREV_STAT_IDX][i] = n_pre[CURRENT_STAT_IDX][i];
     n_rd[PREV_STAT_IDX][i] = n_rd[CURRENT_STAT_IDX][i];
     n_wr[PREV_STAT_IDX][i] = n_wr[CURRENT_STAT_IDX][i];
+    n_wr_WB[PREV_STAT_IDX][i] = n_wr_WB[CURRENT_STAT_IDX][i];
     n_req[PREV_STAT_IDX][i] = n_req[CURRENT_STAT_IDX][i];
   }
 
@@ -117,7 +175,7 @@ void power_mem_stat_t::print(FILE *fout) const {
   unsigned total_mem_writes = 0;
   for (unsigned i = 0; i < m_config->m_n_mem; ++i) {
     total_mem_reads += n_rd[CURRENT_STAT_IDX][i];
-    total_mem_writes += n_wr[CURRENT_STAT_IDX][i];
+    total_mem_writes += n_wr[CURRENT_STAT_IDX][i] + n_wr_WB[CURRENT_STAT_IDX][i];
   }
   fprintf(fout, "Total memory controller accesses: %u\n",
           total_mem_reads + total_mem_writes);
@@ -147,198 +205,165 @@ void power_core_stat_t::print(FILE *fout) {
   // per core statistics
   fprintf(fout, "Power Metrics: \n");
   for (unsigned i = 0; i < m_config->num_shader(); i++) {
-    fprintf(fout, "core %u:\n", i);
-    fprintf(fout, "\tpipeline duty cycle =%f\n",
-            m_pipeline_duty_cycle[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal Deocded Instructions=%u\n",
-            m_num_decoded_insn[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal FP Deocded Instructions=%u\n",
-            m_num_FPdecoded_insn[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal INT Deocded Instructions=%u\n",
-            m_num_INTdecoded_insn[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal LOAD Queued Instructions=%u\n",
-            m_num_loadqueued_insn[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal STORE Queued Instructions=%u\n",
-            m_num_storequeued_insn[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal IALU Acesses=%u\n",
-            m_num_ialu_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal FP Acesses=%u\n",
-            m_num_fp_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal IMUL Acesses=%u\n",
-            m_num_imul_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal IMUL24 Acesses=%u\n",
-            m_num_imul24_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal IMUL32 Acesses=%u\n",
-            m_num_imul32_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal IDIV Acesses=%u\n",
-            m_num_idiv_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal FPMUL Acesses=%u\n",
-            m_num_fpmul_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal SFU Acesses=%u\n",
-            m_num_trans_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal FPDIV Acesses=%u\n",
-            m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal SFU Acesses=%u\n",
-            m_num_sfu_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal SP Acesses=%u\n",
-            m_num_sp_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal MEM Acesses=%u\n",
-            m_num_mem_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal SFU Commissions=%u\n",
-            m_num_sfu_committed[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal SP Commissions=%u\n",
-            m_num_sp_committed[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal MEM Commissions=%u\n",
-            m_num_mem_committed[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal REG Reads=%u\n",
-            m_read_regfile_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal REG Writes=%u\n",
-            m_write_regfile_acesses[CURRENT_STAT_IDX][i]);
-    fprintf(fout, "\tTotal NON REG=%u\n",
-            m_non_rf_operands[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"core %u:\n",i);
+        fprintf(fout,"\tpipeline duty cycle =%f\n",m_pipeline_duty_cycle[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal Deocded Instructions=%u\n",m_num_decoded_insn[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal FP Deocded Instructions=%u\n",m_num_FPdecoded_insn[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal INT Deocded Instructions=%u\n",m_num_INTdecoded_insn[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal LOAD Queued Instructions=%u\n",m_num_loadqueued_insn[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal STORE Queued Instructions=%u\n",m_num_storequeued_insn[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal IALU Acesses=%f\n",m_num_ialu_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal FP Acesses=%f\n",m_num_fp_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal DP Acesses=%f\n",m_num_dp_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal IMUL Acesses=%f\n",m_num_imul_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal IMUL24 Acesses=%f\n",m_num_imul24_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal IMUL32 Acesses=%f\n",m_num_imul32_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal IDIV Acesses=%f\n",m_num_idiv_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal FPMUL Acesses=%f\n",m_num_fpmul_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal DPMUL Acesses=%f\n",m_num_dpmul_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal SQRT Acesses=%f\n",m_num_sqrt_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal LOG Acesses=%f\n",m_num_log_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal SIN Acesses=%f\n",m_num_sin_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal EXP Acesses=%f\n",m_num_exp_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal FPDIV Acesses=%f\n",m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal DPDIV Acesses=%f\n",m_num_dpdiv_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal TENSOR Acesses=%f\n",m_num_tensor_core_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal CONST Acesses=%f\n",m_num_const_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal TEX Acesses=%f\n",m_num_tex_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal SFU Acesses=%f\n",m_num_sfu_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal SP Acesses=%f\n",m_num_sp_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal MEM Acesses=%f\n",m_num_mem_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal SFU Commissions=%u\n",m_num_sfu_committed[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal SP Commissions=%u\n",m_num_sp_committed[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal MEM Commissions=%u\n",m_num_mem_committed[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal REG Reads=%u\n",m_read_regfile_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal REG Writes=%u\n",m_write_regfile_acesses[CURRENT_STAT_IDX][i]);
+        fprintf(fout,"\tTotal NON REG=%u\n",m_non_rf_operands[CURRENT_STAT_IDX][i]);
   }
 }
 void power_core_stat_t::init() {
-  m_pipeline_duty_cycle[CURRENT_STAT_IDX] = m_core_stats->m_pipeline_duty_cycle;
-  m_num_decoded_insn[CURRENT_STAT_IDX] = m_core_stats->m_num_decoded_insn;
-  m_num_FPdecoded_insn[CURRENT_STAT_IDX] = m_core_stats->m_num_FPdecoded_insn;
-  m_num_INTdecoded_insn[CURRENT_STAT_IDX] = m_core_stats->m_num_INTdecoded_insn;
-  m_num_storequeued_insn[CURRENT_STAT_IDX] =
-      m_core_stats->m_num_storequeued_insn;
-  m_num_loadqueued_insn[CURRENT_STAT_IDX] = m_core_stats->m_num_loadqueued_insn;
-  m_num_ialu_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_ialu_acesses;
-  m_num_fp_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_fp_acesses;
-  m_num_imul_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_imul_acesses;
-  m_num_imul24_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_imul24_acesses;
-  m_num_imul32_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_imul32_acesses;
-  m_num_fpmul_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_fpmul_acesses;
-  m_num_idiv_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_idiv_acesses;
-  m_num_fpdiv_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_fpdiv_acesses;
-  m_num_sp_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_sp_acesses;
-  m_num_sfu_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_sfu_acesses;
-  m_num_trans_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_trans_acesses;
-  m_num_mem_acesses[CURRENT_STAT_IDX] = m_core_stats->m_num_mem_acesses;
-  m_num_sp_committed[CURRENT_STAT_IDX] = m_core_stats->m_num_sp_committed;
-  m_num_sfu_committed[CURRENT_STAT_IDX] = m_core_stats->m_num_sfu_committed;
-  m_num_mem_committed[CURRENT_STAT_IDX] = m_core_stats->m_num_mem_committed;
-  m_read_regfile_acesses[CURRENT_STAT_IDX] =
-      m_core_stats->m_read_regfile_acesses;
-  m_write_regfile_acesses[CURRENT_STAT_IDX] =
-      m_core_stats->m_write_regfile_acesses;
-  m_non_rf_operands[CURRENT_STAT_IDX] = m_core_stats->m_non_rf_operands;
-  m_active_sp_lanes[CURRENT_STAT_IDX] = m_core_stats->m_active_sp_lanes;
-  m_active_sfu_lanes[CURRENT_STAT_IDX] = m_core_stats->m_active_sfu_lanes;
-  m_num_tex_inst[CURRENT_STAT_IDX] = m_core_stats->m_num_tex_inst;
+    m_pipeline_duty_cycle[CURRENT_STAT_IDX]=m_core_stats->m_pipeline_duty_cycle;
+    m_num_decoded_insn[CURRENT_STAT_IDX]=m_core_stats->m_num_decoded_insn;
+    m_num_FPdecoded_insn[CURRENT_STAT_IDX]=m_core_stats->m_num_FPdecoded_insn;
+    m_num_INTdecoded_insn[CURRENT_STAT_IDX]=m_core_stats->m_num_INTdecoded_insn;
+    m_num_storequeued_insn[CURRENT_STAT_IDX]=m_core_stats->m_num_storequeued_insn;
+    m_num_loadqueued_insn[CURRENT_STAT_IDX]=m_core_stats->m_num_loadqueued_insn;
+    m_num_ialu_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_ialu_acesses;
+    m_num_fp_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_fp_acesses;
+    m_num_imul_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_imul_acesses;
+    m_num_imul24_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_imul24_acesses;
+    m_num_imul32_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_imul32_acesses;
+    m_num_fpmul_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_fpmul_acesses;
+    m_num_idiv_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_idiv_acesses;
+    m_num_fpdiv_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_fpdiv_acesses;
+    m_num_dp_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_dp_acesses;
+    m_num_dpmul_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_dpmul_acesses;
+    m_num_dpdiv_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_dpdiv_acesses;
+    m_num_sp_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_sp_acesses;
+    m_num_sfu_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_sfu_acesses;
+    m_num_sqrt_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_sqrt_acesses;
+    m_num_log_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_log_acesses;
+    m_num_sin_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_sin_acesses;
+    m_num_exp_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_exp_acesses;
+    m_num_tensor_core_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_tensor_core_acesses;
+    m_num_const_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_const_acesses;
+    m_num_tex_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_tex_acesses;
+    m_num_mem_acesses[CURRENT_STAT_IDX]=m_core_stats->m_num_mem_acesses;
+    m_num_sp_committed[CURRENT_STAT_IDX]=m_core_stats->m_num_sp_committed;
+    m_num_sfu_committed[CURRENT_STAT_IDX]=m_core_stats->m_num_sfu_committed;
+    m_num_mem_committed[CURRENT_STAT_IDX]=m_core_stats->m_num_mem_committed;
+    m_read_regfile_acesses[CURRENT_STAT_IDX]=m_core_stats->m_read_regfile_acesses;
+    m_write_regfile_acesses[CURRENT_STAT_IDX]=m_core_stats->m_write_regfile_acesses;
+    m_non_rf_operands[CURRENT_STAT_IDX]=m_core_stats->m_non_rf_operands;
+    m_active_sp_lanes[CURRENT_STAT_IDX]=m_core_stats->m_active_sp_lanes;
+    m_active_sfu_lanes[CURRENT_STAT_IDX]=m_core_stats->m_active_sfu_lanes;
+    m_active_exu_threads[CURRENT_STAT_IDX]=m_core_stats->m_active_exu_threads;
+    m_active_exu_warps[CURRENT_STAT_IDX]=m_core_stats->m_active_exu_warps;
+    m_num_tex_inst[CURRENT_STAT_IDX]=m_core_stats->m_num_tex_inst;
+
+    m_pipeline_duty_cycle[PREV_STAT_IDX]=(float*)calloc(m_config->num_shader(),sizeof(float));
+    m_num_decoded_insn[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_FPdecoded_insn[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_INTdecoded_insn[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_storequeued_insn[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_loadqueued_insn[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_tex_inst[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+
+    m_num_ialu_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_fp_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_imul_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_imul24_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_imul32_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_fpmul_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_idiv_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_fpdiv_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_dp_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_dpmul_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_dpdiv_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_tensor_core_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_const_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_tex_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_sp_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_sfu_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_sqrt_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_log_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_sin_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_exp_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_mem_acesses[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_num_sp_committed[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_sfu_committed[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_num_mem_committed[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_read_regfile_acesses[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_write_regfile_acesses[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_non_rf_operands[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_active_sp_lanes[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_active_sfu_lanes[PREV_STAT_IDX]=(unsigned *)calloc(m_config->num_shader(),sizeof(unsigned));
+    m_active_exu_threads[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+    m_active_exu_warps[PREV_STAT_IDX]=(double *)calloc(m_config->num_shader(),sizeof(double));
+
 
-  m_pipeline_duty_cycle[PREV_STAT_IDX] =
-      (float *)calloc(m_config->num_shader(), sizeof(float));
-  m_num_decoded_insn[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_FPdecoded_insn[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_INTdecoded_insn[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_storequeued_insn[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_loadqueued_insn[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_ialu_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_fp_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_tex_inst[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_imul_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_imul24_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_imul32_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_fpmul_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_idiv_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_fpdiv_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_sp_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_sfu_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_trans_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_mem_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_sp_committed[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_sfu_committed[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_num_mem_committed[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_read_regfile_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_write_regfile_acesses[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_non_rf_operands[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_active_sp_lanes[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
-  m_active_sfu_lanes[PREV_STAT_IDX] =
-      (unsigned *)calloc(m_config->num_shader(), sizeof(unsigned));
 }
 
 void power_core_stat_t::save_stats() {
   for (unsigned i = 0; i < m_config->num_shader(); ++i) {
-    m_pipeline_duty_cycle[PREV_STAT_IDX][i] =
-        m_pipeline_duty_cycle[CURRENT_STAT_IDX][i];
-    m_num_decoded_insn[PREV_STAT_IDX][i] =
-        m_num_decoded_insn[CURRENT_STAT_IDX][i];
-    m_num_FPdecoded_insn[PREV_STAT_IDX][i] =
-        m_num_FPdecoded_insn[CURRENT_STAT_IDX][i];
-    m_num_INTdecoded_insn[PREV_STAT_IDX][i] =
-        m_num_INTdecoded_insn[CURRENT_STAT_IDX][i];
-    m_num_storequeued_insn[PREV_STAT_IDX][i] =
-        m_num_storequeued_insn[CURRENT_STAT_IDX][i];
-    m_num_loadqueued_insn[PREV_STAT_IDX][i] =
-        m_num_loadqueued_insn[CURRENT_STAT_IDX][i];
-    m_num_ialu_acesses[PREV_STAT_IDX][i] =
-        m_num_ialu_acesses[CURRENT_STAT_IDX][i];
-    m_num_fp_acesses[PREV_STAT_IDX][i] = m_num_fp_acesses[CURRENT_STAT_IDX][i];
-    m_num_tex_inst[PREV_STAT_IDX][i] = m_num_tex_inst[CURRENT_STAT_IDX][i];
-    m_num_imul_acesses[PREV_STAT_IDX][i] =
-        m_num_imul_acesses[CURRENT_STAT_IDX][i];
-    m_num_imul24_acesses[PREV_STAT_IDX][i] =
-        m_num_imul24_acesses[CURRENT_STAT_IDX][i];
-    m_num_imul32_acesses[PREV_STAT_IDX][i] =
-        m_num_imul32_acesses[CURRENT_STAT_IDX][i];
-    m_num_fpmul_acesses[PREV_STAT_IDX][i] =
-        m_num_fpmul_acesses[CURRENT_STAT_IDX][i];
-    m_num_idiv_acesses[PREV_STAT_IDX][i] =
-        m_num_idiv_acesses[CURRENT_STAT_IDX][i];
-    m_num_fpdiv_acesses[PREV_STAT_IDX][i] =
-        m_num_fpdiv_acesses[CURRENT_STAT_IDX][i];
-    m_num_sp_acesses[PREV_STAT_IDX][i] = m_num_sp_acesses[CURRENT_STAT_IDX][i];
-    m_num_sfu_acesses[PREV_STAT_IDX][i] =
-        m_num_sfu_acesses[CURRENT_STAT_IDX][i];
-    m_num_trans_acesses[PREV_STAT_IDX][i] =
-        m_num_trans_acesses[CURRENT_STAT_IDX][i];
-    m_num_mem_acesses[PREV_STAT_IDX][i] =
-        m_num_mem_acesses[CURRENT_STAT_IDX][i];
-    m_num_sp_committed[PREV_STAT_IDX][i] =
-        m_num_sp_committed[CURRENT_STAT_IDX][i];
-    m_num_sfu_committed[PREV_STAT_IDX][i] =
-        m_num_sfu_committed[CURRENT_STAT_IDX][i];
-    m_num_mem_committed[PREV_STAT_IDX][i] =
-        m_num_mem_committed[CURRENT_STAT_IDX][i];
-    m_read_regfile_acesses[PREV_STAT_IDX][i] =
-        m_read_regfile_acesses[CURRENT_STAT_IDX][i];
-    m_write_regfile_acesses[PREV_STAT_IDX][i] =
-        m_write_regfile_acesses[CURRENT_STAT_IDX][i];
-    m_non_rf_operands[PREV_STAT_IDX][i] =
-        m_non_rf_operands[CURRENT_STAT_IDX][i];
-    m_active_sp_lanes[PREV_STAT_IDX][i] =
-        m_active_sp_lanes[CURRENT_STAT_IDX][i];
-    m_active_sfu_lanes[PREV_STAT_IDX][i] =
-        m_active_sfu_lanes[CURRENT_STAT_IDX][i];
+    m_pipeline_duty_cycle[PREV_STAT_IDX][i]=m_pipeline_duty_cycle[CURRENT_STAT_IDX][i];
+    m_num_decoded_insn[PREV_STAT_IDX][i]= m_num_decoded_insn[CURRENT_STAT_IDX][i];
+    m_num_FPdecoded_insn[PREV_STAT_IDX][i]=m_num_FPdecoded_insn[CURRENT_STAT_IDX][i];
+    m_num_INTdecoded_insn[PREV_STAT_IDX][i]=m_num_INTdecoded_insn[CURRENT_STAT_IDX][i];
+    m_num_storequeued_insn[PREV_STAT_IDX][i]=m_num_storequeued_insn[CURRENT_STAT_IDX][i];
+    m_num_loadqueued_insn[PREV_STAT_IDX][i]=m_num_loadqueued_insn[CURRENT_STAT_IDX][i];
+    m_num_ialu_acesses[PREV_STAT_IDX][i]=m_num_ialu_acesses[CURRENT_STAT_IDX][i];
+    m_num_fp_acesses[PREV_STAT_IDX][i]=m_num_fp_acesses[CURRENT_STAT_IDX][i];
+    m_num_tex_inst[PREV_STAT_IDX][i]=m_num_tex_inst[CURRENT_STAT_IDX][i];
+    m_num_imul_acesses[PREV_STAT_IDX][i]=m_num_imul_acesses[CURRENT_STAT_IDX][i];
+    m_num_imul24_acesses[PREV_STAT_IDX][i]=m_num_imul24_acesses[CURRENT_STAT_IDX][i];
+    m_num_imul32_acesses[PREV_STAT_IDX][i]=m_num_imul32_acesses[CURRENT_STAT_IDX][i];
+    m_num_fpmul_acesses[PREV_STAT_IDX][i]=m_num_fpmul_acesses[CURRENT_STAT_IDX][i];
+    m_num_idiv_acesses[PREV_STAT_IDX][i]=m_num_idiv_acesses[CURRENT_STAT_IDX][i];
+    m_num_fpdiv_acesses[PREV_STAT_IDX][i]=m_num_fpdiv_acesses[CURRENT_STAT_IDX][i];
+    m_num_sp_acesses[PREV_STAT_IDX][i]=m_num_sp_acesses[CURRENT_STAT_IDX][i];
+    m_num_sfu_acesses[PREV_STAT_IDX][i]=m_num_sfu_acesses[CURRENT_STAT_IDX][i];
+    m_num_sqrt_acesses[PREV_STAT_IDX][i]=m_num_sqrt_acesses[CURRENT_STAT_IDX][i];
+    m_num_log_acesses[PREV_STAT_IDX][i]=m_num_log_acesses[CURRENT_STAT_IDX][i];
+    m_num_sin_acesses[PREV_STAT_IDX][i]=m_num_sin_acesses[CURRENT_STAT_IDX][i];
+    m_num_exp_acesses[PREV_STAT_IDX][i]=m_num_exp_acesses[CURRENT_STAT_IDX][i];
+    m_num_dp_acesses[PREV_STAT_IDX][i]=m_num_dp_acesses[CURRENT_STAT_IDX][i];
+    m_num_dpmul_acesses[PREV_STAT_IDX][i]=m_num_dpmul_acesses[CURRENT_STAT_IDX][i];
+    m_num_dpdiv_acesses[PREV_STAT_IDX][i]=m_num_dpdiv_acesses[CURRENT_STAT_IDX][i];
+    m_num_tensor_core_acesses[PREV_STAT_IDX][i]=m_num_tensor_core_acesses[CURRENT_STAT_IDX][i];
+    m_num_const_acesses[PREV_STAT_IDX][i]=m_num_const_acesses[CURRENT_STAT_IDX][i];
+    m_num_tex_acesses[PREV_STAT_IDX][i]=m_num_tex_acesses[CURRENT_STAT_IDX][i];
+    m_num_mem_acesses[PREV_STAT_IDX][i]=m_num_mem_acesses[CURRENT_STAT_IDX][i];
+    m_num_sp_committed[PREV_STAT_IDX][i]=m_num_sp_committed[CURRENT_STAT_IDX][i];
+    m_num_sfu_committed[PREV_STAT_IDX][i]=m_num_sfu_committed[CURRENT_STAT_IDX][i];
+    m_num_mem_committed[PREV_STAT_IDX][i]=m_num_mem_committed[CURRENT_STAT_IDX][i];
+    m_read_regfile_acesses[PREV_STAT_IDX][i]=m_read_regfile_acesses[CURRENT_STAT_IDX][i];
+    m_write_regfile_acesses[PREV_STAT_IDX][i]=m_write_regfile_acesses[CURRENT_STAT_IDX][i];
+    m_non_rf_operands[PREV_STAT_IDX][i]=m_non_rf_operands[CURRENT_STAT_IDX][i];
+    m_active_sp_lanes[PREV_STAT_IDX][i]=m_active_sp_lanes[CURRENT_STAT_IDX][i];
+    m_active_sfu_lanes[PREV_STAT_IDX][i]=m_active_sfu_lanes[CURRENT_STAT_IDX][i];
+    m_active_exu_threads[PREV_STAT_IDX][i]=m_active_exu_threads[CURRENT_STAT_IDX][i];
+    m_active_exu_warps[PREV_STAT_IDX][i]=m_active_exu_warps[CURRENT_STAT_IDX][i];
   }
 }
 
@@ -356,6 +381,51 @@ power_stat_t::power_stat_t(const shader_core_config *shader_config,
   m_active_sms = active_sms;
   m_config = shader_config;
   m_mem_config = mem_config;
+  l1r_hits_kernel = 0;
+  l1r_misses_kernel = 0;
+  l1w_hits_kernel = 0;
+  l1w_misses_kernel = 0;
+  shared_accesses_kernel = 0;
+  cc_accesses_kernel = 0;
+  dram_rd_kernel = 0;
+  dram_wr_kernel = 0;
+  dram_pre_kernel = 0;
+  l1i_hits_kernel =0;
+  l1i_misses_kernel =0;
+  l2r_hits_kernel =0;
+  l2r_misses_kernel =0;
+  l2w_hits_kernel =0;
+  l2w_misses_kernel =0;
+  noc_tr_kernel = 0;
+  noc_rc_kernel = 0;
+
+  tot_inst_execution = 0;
+  tot_int_inst_execution = 0;
+  tot_fp_inst_execution = 0;
+  commited_inst_execution = 0;
+  ialu_acc_execution = 0;
+  imul24_acc_execution = 0;
+  imul32_acc_execution = 0;
+  imul_acc_execution = 0;
+  idiv_acc_execution = 0;
+  dp_acc_execution = 0;
+  dpmul_acc_execution = 0;
+  dpdiv_acc_execution = 0;
+  fp_acc_execution = 0;
+  fpmul_acc_execution = 0;
+  fpdiv_acc_execution = 0;
+  sqrt_acc_execution = 0;
+  log_acc_execution = 0;
+  sin_acc_execution = 0;
+  exp_acc_execution = 0;
+  tensor_acc_execution = 0;
+  tex_acc_execution = 0;
+  tot_fpu_acc_execution = 0;
+  tot_sfu_acc_execution = 0;
+  tot_threads_acc_execution = 0;
+  tot_warps_acc_execution = 0;
+  sp_active_lanes_execution = 0;
+  sfu_active_lanes_execution = 0;
 }
 
 void power_stat_t::visualizer_print(gzFile visualizer_file) {
diff --git a/src/gpgpu-sim/power_stat.h b/src/gpgpu-sim/power_stat.h
index c469db3..d40f1d9 100644
--- a/src/gpgpu-sim/power_stat.h
+++ b/src/gpgpu-sim/power_stat.h
@@ -1,18 +1,20 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington
-// The University of British Columbia
+// Copyright (c) 2009-2021,  Tor M. Aamodt, Ahmed El-Shafiey, Tayler Hetherington, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -51,29 +53,40 @@ struct shader_core_power_stats_pod {
   unsigned
       *m_num_INTdecoded_insn[NUM_STAT_IDX];  // number of instructions committed
                                              // by this shader core
-  unsigned *m_num_storequeued_insn[NUM_STAT_IDX];
-  unsigned *m_num_loadqueued_insn[NUM_STAT_IDX];
-  unsigned *m_num_ialu_acesses[NUM_STAT_IDX];
-  unsigned *m_num_fp_acesses[NUM_STAT_IDX];
-  unsigned *m_num_tex_inst[NUM_STAT_IDX];
-  unsigned *m_num_imul_acesses[NUM_STAT_IDX];
-  unsigned *m_num_imul32_acesses[NUM_STAT_IDX];
-  unsigned *m_num_imul24_acesses[NUM_STAT_IDX];
-  unsigned *m_num_fpmul_acesses[NUM_STAT_IDX];
-  unsigned *m_num_idiv_acesses[NUM_STAT_IDX];
-  unsigned *m_num_fpdiv_acesses[NUM_STAT_IDX];
-  unsigned *m_num_sp_acesses[NUM_STAT_IDX];
-  unsigned *m_num_sfu_acesses[NUM_STAT_IDX];
-  unsigned *m_num_trans_acesses[NUM_STAT_IDX];
-  unsigned *m_num_mem_acesses[NUM_STAT_IDX];
-  unsigned *m_num_sp_committed[NUM_STAT_IDX];
-  unsigned *m_num_sfu_committed[NUM_STAT_IDX];
-  unsigned *m_num_mem_committed[NUM_STAT_IDX];
-  unsigned *m_active_sp_lanes[NUM_STAT_IDX];
-  unsigned *m_active_sfu_lanes[NUM_STAT_IDX];
-  unsigned *m_read_regfile_acesses[NUM_STAT_IDX];
-  unsigned *m_write_regfile_acesses[NUM_STAT_IDX];
-  unsigned *m_non_rf_operands[NUM_STAT_IDX];
+    unsigned *m_num_storequeued_insn[NUM_STAT_IDX];
+    unsigned *m_num_loadqueued_insn[NUM_STAT_IDX];
+    unsigned *m_num_tex_inst[NUM_STAT_IDX];
+    double *m_num_ialu_acesses[NUM_STAT_IDX];
+    double *m_num_fp_acesses[NUM_STAT_IDX];
+    double *m_num_imul_acesses[NUM_STAT_IDX];
+    double *m_num_imul32_acesses[NUM_STAT_IDX];
+    double *m_num_imul24_acesses[NUM_STAT_IDX];
+    double *m_num_fpmul_acesses[NUM_STAT_IDX];
+    double *m_num_idiv_acesses[NUM_STAT_IDX];
+    double *m_num_fpdiv_acesses[NUM_STAT_IDX];
+    double *m_num_dp_acesses[NUM_STAT_IDX];
+    double *m_num_dpmul_acesses[NUM_STAT_IDX];
+    double *m_num_dpdiv_acesses[NUM_STAT_IDX];
+    double *m_num_sp_acesses[NUM_STAT_IDX];
+    double *m_num_sfu_acesses[NUM_STAT_IDX];
+    double *m_num_sqrt_acesses[NUM_STAT_IDX];
+    double *m_num_log_acesses[NUM_STAT_IDX];
+    double *m_num_sin_acesses[NUM_STAT_IDX];
+    double *m_num_exp_acesses[NUM_STAT_IDX];
+    double *m_num_tensor_core_acesses[NUM_STAT_IDX];
+    double *m_num_const_acesses[NUM_STAT_IDX];
+    double *m_num_tex_acesses[NUM_STAT_IDX];
+    double *m_num_mem_acesses[NUM_STAT_IDX];
+    unsigned *m_num_sp_committed[NUM_STAT_IDX];
+    unsigned *m_num_sfu_committed[NUM_STAT_IDX];
+    unsigned *m_num_mem_committed[NUM_STAT_IDX];
+    unsigned *m_active_sp_lanes[NUM_STAT_IDX];
+    unsigned *m_active_sfu_lanes[NUM_STAT_IDX];
+    double *m_active_exu_threads[NUM_STAT_IDX];
+    double *m_active_exu_warps[NUM_STAT_IDX];    
+    unsigned *m_read_regfile_acesses[NUM_STAT_IDX];
+    unsigned *m_write_regfile_acesses[NUM_STAT_IDX];
+    unsigned *m_non_rf_operands[NUM_STAT_IDX];
 };
 
 class power_core_stat_t : public shader_core_power_stats_pod {
@@ -84,6 +97,7 @@ class power_core_stat_t : public shader_core_power_stats_pod {
   void print(FILE *fout);
   void init();
   void save_stats();
+ 
 
  private:
   shader_core_stats *m_core_stats;
@@ -96,8 +110,7 @@ struct mem_power_stats_pod {
   class cache_stats core_cache_stats[NUM_STAT_IDX];  // Total core stats
   class cache_stats l2_cache_stats[NUM_STAT_IDX];    // Total L2 partition stats
 
-  unsigned *shmem_read_access[NUM_STAT_IDX];  // Shared memory access
-
+  unsigned *shmem_access[NUM_STAT_IDX];  // Shared memory access
   // Low level DRAM stats
   unsigned *n_cmd[NUM_STAT_IDX];
   unsigned *n_activity[NUM_STAT_IDX];
@@ -106,6 +119,7 @@ struct mem_power_stats_pod {
   unsigned *n_pre[NUM_STAT_IDX];
   unsigned *n_rd[NUM_STAT_IDX];
   unsigned *n_wr[NUM_STAT_IDX];
+  unsigned *n_wr_WB[NUM_STAT_IDX];
   unsigned *n_req[NUM_STAT_IDX];
 
   // Interconnect stats
@@ -144,34 +158,88 @@ class power_stat_t {
     *m_average_pipeline_duty_cycle = 0;
     *m_active_sms = 0;
   }
-
-  unsigned get_total_inst() {
-    unsigned total_inst = 0;
+  void clear();
+  unsigned l1i_misses_kernel;
+  unsigned l1i_hits_kernel;
+  unsigned long long l1r_hits_kernel;
+  unsigned long long l1r_misses_kernel;
+  unsigned long long l1w_hits_kernel;
+  unsigned long long l1w_misses_kernel;
+  unsigned long long shared_accesses_kernel;
+  unsigned long long cc_accesses_kernel;
+  unsigned long long dram_rd_kernel;
+  unsigned long long dram_wr_kernel;
+  unsigned long long dram_pre_kernel;
+  unsigned long long l2r_hits_kernel;
+  unsigned long long l2r_misses_kernel;
+  unsigned long long l2w_hits_kernel;
+  unsigned long long l2w_misses_kernel;
+  unsigned long long noc_tr_kernel;
+  unsigned long long noc_rc_kernel;
+  unsigned long long tot_inst_execution;
+  unsigned long long tot_int_inst_execution;
+  unsigned long long tot_fp_inst_execution;
+  unsigned long long commited_inst_execution;
+  unsigned long long ialu_acc_execution;
+  unsigned long long imul24_acc_execution;
+  unsigned long long imul32_acc_execution;
+  unsigned long long imul_acc_execution;
+  unsigned long long idiv_acc_execution;
+  unsigned long long dp_acc_execution;
+  unsigned long long dpmul_acc_execution;
+  unsigned long long dpdiv_acc_execution;
+  unsigned long long fp_acc_execution;
+  unsigned long long fpmul_acc_execution;
+  unsigned long long fpdiv_acc_execution;
+  unsigned long long sqrt_acc_execution;
+  unsigned long long log_acc_execution;
+  unsigned long long sin_acc_execution;
+  unsigned long long exp_acc_execution;
+  unsigned long long tensor_acc_execution;
+  unsigned long long tex_acc_execution;
+  unsigned long long tot_fpu_acc_execution;
+  unsigned long long tot_sfu_acc_execution;
+  unsigned long long tot_threads_acc_execution;
+  unsigned long long tot_warps_acc_execution;
+  unsigned long long sp_active_lanes_execution;
+  unsigned long long sfu_active_lanes_execution;
+  double get_total_inst(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_decoded_insn[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_decoded_insn[CURRENT_STAT_IDX][i]);
+      else
+        total_inst += (pwr_core_stat->m_num_decoded_insn[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_decoded_insn[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_total_int_inst() {
-    unsigned total_inst = 0;
+  double get_total_int_inst(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst +=
+      if(aggregate_stat)
+          total_inst +=
+          (pwr_core_stat->m_num_INTdecoded_insn[CURRENT_STAT_IDX][i]);
+      else 
+        total_inst +=
           (pwr_core_stat->m_num_INTdecoded_insn[CURRENT_STAT_IDX][i]) -
           (pwr_core_stat->m_num_INTdecoded_insn[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_total_fp_inst() {
-    unsigned total_inst = 0;
+  double get_total_fp_inst(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_FPdecoded_insn[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_FPdecoded_insn[CURRENT_STAT_IDX][i]);
+      else 
+        total_inst += (pwr_core_stat->m_num_FPdecoded_insn[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_FPdecoded_insn[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_total_load_inst() {
-    unsigned total_inst = 0;
+  double get_total_load_inst() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst +=
           (pwr_core_stat->m_num_loadqueued_insn[CURRENT_STAT_IDX][i]) -
@@ -179,8 +247,8 @@ class power_stat_t {
     }
     return total_inst;
   }
-  unsigned get_total_store_inst() {
-    unsigned total_inst = 0;
+  double get_total_store_inst() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst +=
           (pwr_core_stat->m_num_storequeued_insn[CURRENT_STAT_IDX][i]) -
@@ -188,34 +256,39 @@ class power_stat_t {
     }
     return total_inst;
   }
-  unsigned get_sp_committed_inst() {
-    unsigned total_inst = 0;
+  double get_sp_committed_inst() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_sp_committed[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_sp_committed[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_sfu_committed_inst() {
-    unsigned total_inst = 0;
+  double get_sfu_committed_inst() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_sfu_committed[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_sfu_committed[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_mem_committed_inst() {
-    unsigned total_inst = 0;
+  double get_mem_committed_inst() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_mem_committed[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_mem_committed[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_committed_inst() {
-    unsigned total_inst = 0;
+  double get_committed_inst(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_mem_committed[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_mem_committed[CURRENT_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_sfu_committed[CURRENT_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_sp_committed[CURRENT_STAT_IDX][i]);
+      else
+        total_inst += (pwr_core_stat->m_num_mem_committed[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_mem_committed[PREV_STAT_IDX][i]) +
                     (pwr_core_stat->m_num_sfu_committed[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_sfu_committed[PREV_STAT_IDX][i]) +
@@ -224,19 +297,27 @@ class power_stat_t {
     }
     return total_inst;
   }
-  unsigned get_regfile_reads() {
-    unsigned total_inst = 0;
+  double get_regfile_reads(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst +=
+      if(aggregate_stat)
+         total_inst +=
+          (pwr_core_stat->m_read_regfile_acesses[CURRENT_STAT_IDX][i]);
+      else
+        total_inst +=
           (pwr_core_stat->m_read_regfile_acesses[CURRENT_STAT_IDX][i]) -
           (pwr_core_stat->m_read_regfile_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_regfile_writes() {
-    unsigned total_inst = 0;
+  double get_regfile_writes(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst +=
+      if(aggregate_stat)
+        total_inst +=
+          (pwr_core_stat->m_write_regfile_acesses[CURRENT_STAT_IDX][i]);
+      else
+        total_inst +=
           (pwr_core_stat->m_write_regfile_acesses[CURRENT_STAT_IDX][i]) -
           (pwr_core_stat->m_write_regfile_acesses[PREV_STAT_IDX][i]);
     }
@@ -253,17 +334,20 @@ class power_stat_t {
     return total_inst;
   }
 
-  unsigned get_non_regfile_operands() {
-    unsigned total_inst = 0;
+  double get_non_regfile_operands(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_non_rf_operands[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+         total_inst += (pwr_core_stat->m_non_rf_operands[CURRENT_STAT_IDX][i]);
+      else
+        total_inst += (pwr_core_stat->m_non_rf_operands[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_non_rf_operands[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_sp_accessess() {
-    unsigned total_inst = 0;
+  double get_sp_accessess() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_sp_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_sp_acesses[PREV_STAT_IDX][i]);
@@ -271,25 +355,58 @@ class power_stat_t {
     return total_inst;
   }
 
-  unsigned get_sfu_accessess() {
-    unsigned total_inst = 0;
+  double get_sfu_accessess() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_sfu_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_sfu_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
-  unsigned get_trans_accessess() {
-    unsigned total_inst = 0;
-    for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_trans_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_trans_acesses[PREV_STAT_IDX][i]);
-    }
-    return total_inst;
+
+  double get_sqrt_accessess(bool aggregate_stat){
+      double total_inst=0;
+      for(unsigned i=0; i<m_config->num_shader();i++){
+          if(aggregate_stat)
+            total_inst+=(pwr_core_stat->m_num_sqrt_acesses[CURRENT_STAT_IDX][i]);
+          else
+            total_inst+=(pwr_core_stat->m_num_sqrt_acesses[CURRENT_STAT_IDX][i]) - (pwr_core_stat->m_num_sqrt_acesses[PREV_STAT_IDX][i]);
+      }
+      return total_inst;
+  }
+  double get_log_accessess(bool aggregate_stat){
+      double total_inst=0;
+      for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)
+          total_inst+=(pwr_core_stat->m_num_log_acesses[CURRENT_STAT_IDX][i]);
+        else 
+          total_inst+=(pwr_core_stat->m_num_log_acesses[CURRENT_STAT_IDX][i]) - (pwr_core_stat->m_num_log_acesses[PREV_STAT_IDX][i]);
+      }
+      return total_inst;
+  }
+  double get_sin_accessess(bool aggregate_stat){
+      double total_inst=0;
+      for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)  
+          total_inst+=(pwr_core_stat->m_num_sin_acesses[CURRENT_STAT_IDX][i]);
+        else 
+          total_inst+=(pwr_core_stat->m_num_sin_acesses[CURRENT_STAT_IDX][i]) - (pwr_core_stat->m_num_sin_acesses[PREV_STAT_IDX][i]);
+      }
+      return total_inst;
+  }
+  double get_exp_accessess(bool aggregate_stat){
+      double total_inst=0;
+      for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)  
+          total_inst+=(pwr_core_stat->m_num_exp_acesses[CURRENT_STAT_IDX][i]);
+        else  
+          total_inst+=(pwr_core_stat->m_num_exp_acesses[CURRENT_STAT_IDX][i]) - (pwr_core_stat->m_num_exp_acesses[PREV_STAT_IDX][i]);
+      }
+      return total_inst;
   }
 
-  unsigned get_mem_accessess() {
-    unsigned total_inst = 0;
+  double get_mem_accessess() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_mem_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_mem_acesses[PREV_STAT_IDX][i]);
@@ -297,66 +414,164 @@ class power_stat_t {
     return total_inst;
   }
 
-  unsigned get_intdiv_accessess() {
-    unsigned total_inst = 0;
+  double get_intdiv_accessess(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_idiv_acesses[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_idiv_acesses[CURRENT_STAT_IDX][i]);
+      else
+        total_inst += (pwr_core_stat->m_num_idiv_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_idiv_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_fpdiv_accessess() {
-    unsigned total_inst = 0;
+  double get_fpdiv_accessess(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_fpdiv_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_intmul32_accessess() {
-    unsigned total_inst = 0;
+  double get_intmul32_accessess(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_imul32_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_intmul24_accessess() {
-    unsigned total_inst = 0;
+  double get_intmul24_accessess(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_imul24_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_intmul_accessess() {
-    unsigned total_inst = 0;
-    for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_imul_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_imul_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_imul24_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_imul32_acesses[PREV_STAT_IDX][i]);
+  double get_intmul_accessess(bool aggregate_stat){
+      double total_inst=0;
+      for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)
+          total_inst+= (pwr_core_stat->m_num_imul_acesses[CURRENT_STAT_IDX][i]); 
+        else  
+          total_inst+= (pwr_core_stat->m_num_imul_acesses[CURRENT_STAT_IDX][i]) - 
+                       (pwr_core_stat->m_num_imul_acesses[PREV_STAT_IDX][i]);
+      }
+      return total_inst;
+  }
+
+  double get_fpmul_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)
+          total_inst += (pwr_core_stat->m_num_fpmul_acesses[CURRENT_STAT_IDX][i]);
+        else
+          total_inst += (pwr_core_stat->m_num_fpmul_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_fpmul_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_fpmul_accessess() {
-    unsigned total_inst = 0;
-    for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_fp_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_fp_acesses[PREV_STAT_IDX][i]);
+  double get_fp_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)
+          total_inst += (pwr_core_stat->m_num_fp_acesses[CURRENT_STAT_IDX][i]);
+        else  
+          total_inst += (pwr_core_stat->m_num_fp_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_fp_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  float get_sp_active_lanes() {
-    unsigned total_inst = 0;
+  double get_dp_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)
+          total_inst += (pwr_core_stat->m_num_dp_acesses[CURRENT_STAT_IDX][i]);
+        else  
+          total_inst += (pwr_core_stat->m_num_dp_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_dp_acesses[PREV_STAT_IDX][i]);
+    }
+    return total_inst;
+  }
+
+  double get_dpmul_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+      if(aggregate_stat)  
+        total_inst += (pwr_core_stat->m_num_dpmul_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_dpmul_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_dpmul_acesses[PREV_STAT_IDX][i]);
+    }
+    return total_inst;
+  }
+
+  double get_dpdiv_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+      if(aggregate_stat)  
+        total_inst += (pwr_core_stat->m_num_dpdiv_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_dpdiv_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_dpdiv_acesses[PREV_STAT_IDX][i]);
+    }
+    return total_inst;
+  }
+
+  double get_tensor_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+      if(aggregate_stat)  
+        total_inst += (pwr_core_stat->m_num_tensor_core_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_tensor_core_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_tensor_core_acesses[PREV_STAT_IDX][i]);
+    }
+    return total_inst;
+  }
+
+  double get_const_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+        if(aggregate_stat)
+          total_inst += pwr_core_stat->m_num_const_acesses[CURRENT_STAT_IDX][i];
+        else
+          total_inst += (pwr_core_stat->m_num_const_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_const_acesses[PREV_STAT_IDX][i]);
+    }
+    return (total_inst);
+  }
+
+  double get_tex_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+      if(aggregate_stat)  
+        total_inst += (pwr_core_stat->m_num_tex_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_tex_acesses[CURRENT_STAT_IDX][i]) - 
+                      (pwr_core_stat->m_num_tex_acesses[PREV_STAT_IDX][i]);
+    }
+    return total_inst;
+  }
+
+  double get_sp_active_lanes() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_active_sp_lanes[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_active_sp_lanes[PREV_STAT_IDX][i]);
@@ -365,7 +580,7 @@ class power_stat_t {
   }
 
   float get_sfu_active_lanes() {
-    unsigned total_inst = 0;
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_active_sfu_lanes[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_active_sfu_lanes[PREV_STAT_IDX][i]);
@@ -375,49 +590,141 @@ class power_stat_t {
            m_config->gpgpu_num_sfu_units;
   }
 
-  unsigned get_tot_fpu_accessess() {
-    unsigned total_inst = 0;
+
+  float get_active_threads(bool aggregate_stat) {
+    unsigned total_threads = 0;
+    unsigned total_warps = 0;
+    for (unsigned i = 0; i < m_config->num_shader(); i++) {
+      if(aggregate_stat){
+        total_threads += (pwr_core_stat->m_active_exu_threads[CURRENT_STAT_IDX][i]) ;
+        total_warps += (pwr_core_stat->m_active_exu_warps[CURRENT_STAT_IDX][i]);
+      }
+      else{
+        total_threads += (pwr_core_stat->m_active_exu_threads[CURRENT_STAT_IDX][i]) -
+                    (pwr_core_stat->m_active_exu_threads[PREV_STAT_IDX][i]);
+        total_warps += (pwr_core_stat->m_active_exu_warps[CURRENT_STAT_IDX][i]) -
+                    (pwr_core_stat->m_active_exu_warps[PREV_STAT_IDX][i]);
+        }
+    }
+    if(total_warps != 0)
+      return (float)((float)total_threads / (float)total_warps);
+    else
+      return 0;
+  }
+
+  unsigned long long get_tot_threads_kernel(bool aggregate_stat) {
+    unsigned total_threads = 0;
+    for (unsigned i = 0; i < m_config->num_shader(); i++) {
+      if(aggregate_stat){
+        total_threads += (pwr_core_stat->m_active_exu_threads[CURRENT_STAT_IDX][i]) ;
+      }
+      else{
+        total_threads += (pwr_core_stat->m_active_exu_threads[CURRENT_STAT_IDX][i]) -
+                    (pwr_core_stat->m_active_exu_threads[PREV_STAT_IDX][i]);
+        }
+    }
+
+      return total_threads;
+  }
+  unsigned long long get_tot_warps_kernel(bool aggregate_stat) {
+    unsigned long long total_warps = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_fp_acesses[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat){
+        total_warps += (pwr_core_stat->m_active_exu_warps[CURRENT_STAT_IDX][i]);
+      }
+      else{
+        total_warps += (pwr_core_stat->m_active_exu_warps[CURRENT_STAT_IDX][i]) -
+                    (pwr_core_stat->m_active_exu_warps[PREV_STAT_IDX][i]);
+        }
+    }
+      return total_warps;
+  }
+
+
+  double get_tot_fpu_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_fp_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_dp_acesses[CURRENT_STAT_IDX][i]);
+      else
+        total_inst += (pwr_core_stat->m_num_fp_acesses[CURRENT_STAT_IDX][i]) - 
                     (pwr_core_stat->m_num_fp_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_fpdiv_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_fpmul_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_fpmul_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_imul24_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_imul_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_imul_acesses[PREV_STAT_IDX][i]);
+                    (pwr_core_stat->m_num_dp_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_dp_acesses[PREV_STAT_IDX][i]);
     }
-    total_inst +=
-        get_total_load_inst() + get_total_store_inst() + get_tex_inst();
+    //total_inst += get_total_load_inst()+get_total_store_inst()+get_tex_inst();
     return total_inst;
   }
 
-  unsigned get_tot_sfu_accessess() {
-    unsigned total_inst = 0;
-    for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_idiv_acesses[CURRENT_STAT_IDX][i]) -
+
+
+  double get_tot_sfu_accessess(bool aggregate_stat){
+    double total_inst=0;
+    for(unsigned i=0; i<m_config->num_shader();i++){
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_idiv_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_sqrt_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_log_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_sin_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_exp_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_fpdiv_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_fpmul_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_dpmul_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_dpdiv_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_imul_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_tensor_core_acesses[CURRENT_STAT_IDX][i])+
+                    (pwr_core_stat->m_num_tex_acesses[CURRENT_STAT_IDX][i]);
+        else
+            total_inst += (pwr_core_stat->m_num_idiv_acesses[CURRENT_STAT_IDX][i]) - 
                     (pwr_core_stat->m_num_idiv_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i]) -
+                    (pwr_core_stat->m_num_imul32_acesses[CURRENT_STAT_IDX][i]) - 
                     (pwr_core_stat->m_num_imul32_acesses[PREV_STAT_IDX][i]) +
-                    (pwr_core_stat->m_num_trans_acesses[CURRENT_STAT_IDX][i]) -
-                    (pwr_core_stat->m_num_trans_acesses[PREV_STAT_IDX][i]);
+                    (pwr_core_stat->m_num_sqrt_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_sqrt_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_log_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_log_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_sin_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_sin_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_exp_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_exp_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_fpdiv_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_fpdiv_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_fpmul_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_fpmul_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_dpmul_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_dpmul_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_dpdiv_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_dpdiv_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_imul24_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_imul24_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_imul_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_imul_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_tensor_core_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_tensor_core_acesses[PREV_STAT_IDX][i]) +
+                    (pwr_core_stat->m_num_tex_acesses[CURRENT_STAT_IDX][i]) - 
+                    (pwr_core_stat->m_num_tex_acesses[PREV_STAT_IDX][i]);
+
     }
     return total_inst;
   }
 
-  unsigned get_ialu_accessess() {
-    unsigned total_inst = 0;
+  double get_ialu_accessess(bool aggregate_stat) {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_core_stat->m_num_ialu_acesses[CURRENT_STAT_IDX][i]) -
+      if(aggregate_stat)
+        total_inst += (pwr_core_stat->m_num_ialu_acesses[CURRENT_STAT_IDX][i]);
+      else  
+        total_inst += (pwr_core_stat->m_num_ialu_acesses[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_ialu_acesses[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_tex_inst() {
-    unsigned total_inst = 0;
+  double get_tex_inst() {
+    double total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
       total_inst += (pwr_core_stat->m_num_tex_inst[CURRENT_STAT_IDX][i]) -
                     (pwr_core_stat->m_num_tex_inst[PREV_STAT_IDX][i]);
@@ -425,7 +732,7 @@ class power_stat_t {
     return total_inst;
   }
 
-  unsigned get_constant_c_accesses() {
+  double get_constant_c_accesses() {
     enum mem_access_type access_type[] = {CONST_ACC_R};
     enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
     unsigned num_access_type =
@@ -440,7 +747,7 @@ class power_stat_t {
                access_type, num_access_type, request_status,
                num_request_status));
   }
-  unsigned get_constant_c_misses() {
+  double get_constant_c_misses() {
     enum mem_access_type access_type[] = {CONST_ACC_R};
     enum cache_request_status request_status[] = {MISS};
     unsigned num_access_type =
@@ -455,10 +762,10 @@ class power_stat_t {
                access_type, num_access_type, request_status,
                num_request_status));
   }
-  unsigned get_constant_c_hits() {
+  double get_constant_c_hits() {
     return (get_constant_c_accesses() - get_constant_c_misses());
   }
-  unsigned get_texture_c_accesses() {
+  double get_texture_c_accesses() {
     enum mem_access_type access_type[] = {TEXTURE_ACC_R};
     enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
     unsigned num_access_type =
@@ -473,7 +780,7 @@ class power_stat_t {
                access_type, num_access_type, request_status,
                num_request_status));
   }
-  unsigned get_texture_c_misses() {
+  double get_texture_c_misses() {
     enum mem_access_type access_type[] = {TEXTURE_ACC_R};
     enum cache_request_status request_status[] = {MISS};
     unsigned num_access_type =
@@ -488,205 +795,268 @@ class power_stat_t {
                access_type, num_access_type, request_status,
                num_request_status));
   }
-  unsigned get_texture_c_hits() {
+  double get_texture_c_hits() {
     return (get_texture_c_accesses() - get_texture_c_misses());
   }
-  unsigned get_inst_c_accesses() {
+  double get_inst_c_accesses(bool aggregate_stat) {
     enum mem_access_type access_type[] = {INST_ACC_R};
     enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
-
-    return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat)
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    else
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->core_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
   }
-  unsigned get_inst_c_misses() {
+  double get_inst_c_misses(bool aggregate_stat) {
     enum mem_access_type access_type[] = {INST_ACC_R};
     enum cache_request_status request_status[] = {MISS};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
-
-    return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat)
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    else
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->core_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
   }
-  unsigned get_inst_c_hits() {
-    return (get_inst_c_accesses() - get_inst_c_misses());
+  double get_inst_c_hits(bool aggregate_stat) {
+    return (get_inst_c_accesses(aggregate_stat) - get_inst_c_misses(aggregate_stat));
   }
 
-  unsigned get_l1d_read_accesses() {
+  double get_l1d_read_accesses(bool aggregate_stat) {
     enum mem_access_type access_type[] = {GLOBAL_ACC_R, LOCAL_ACC_R};
-    enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
+    enum cache_request_status request_status[] = {HIT, MISS, SECTOR_MISS}; 
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
 
-    return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->core_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+      }
   }
-  unsigned get_l1d_read_misses() {
+  double get_l1d_read_misses(bool aggregate_stat) {
+    return (get_l1d_read_accesses(aggregate_stat) - get_l1d_read_hits(aggregate_stat));
+  }
+  double get_l1d_read_hits(bool aggregate_stat) {
     enum mem_access_type access_type[] = {GLOBAL_ACC_R, LOCAL_ACC_R};
-    enum cache_request_status request_status[] = {MISS};
+    enum cache_request_status request_status[] = {HIT, MSHR_HIT};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
 
-    return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+       return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->core_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+      }
   }
-  unsigned get_l1d_read_hits() {
-    return (get_l1d_read_accesses() - get_l1d_read_misses());
-  }
-  unsigned get_l1d_write_accesses() {
+  double get_l1d_write_accesses(bool aggregate_stat) {
     enum mem_access_type access_type[] = {GLOBAL_ACC_W, LOCAL_ACC_W};
-    enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
+    enum cache_request_status request_status[] = {HIT, MISS, SECTOR_MISS};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
 
-    return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+       return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->core_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+      }
   }
-  unsigned get_l1d_write_misses() {
+  double get_l1d_write_misses(bool aggregate_stat) {
+    return (get_l1d_write_accesses(aggregate_stat) - get_l1d_write_hits(aggregate_stat));
+  }
+  double get_l1d_write_hits(bool aggregate_stat) {
     enum mem_access_type access_type[] = {GLOBAL_ACC_W, LOCAL_ACC_W};
-    enum cache_request_status request_status[] = {MISS};
+    enum cache_request_status request_status[] = {HIT, MSHR_HIT};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
 
-    return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+       return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->core_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->core_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+      }
   }
-  unsigned get_l1d_write_hits() {
-    return (get_l1d_write_accesses() - get_l1d_write_misses());
-  }
-  unsigned get_cache_misses() {
-    return get_l1d_read_misses() + get_constant_c_misses() +
-           get_l1d_write_misses() + get_texture_c_misses();
+  double get_cache_misses() {
+    return get_l1d_read_misses(0) + get_constant_c_misses() +
+           get_l1d_write_misses(0) + get_texture_c_misses();
   }
 
-  unsigned get_cache_read_misses() {
-    return get_l1d_read_misses() + get_constant_c_misses() +
+  double get_cache_read_misses() {
+    return get_l1d_read_misses(0) + get_constant_c_misses() +
            get_texture_c_misses();
   }
 
-  unsigned get_cache_write_misses() { return get_l1d_write_misses(); }
+  double get_cache_write_misses() { return get_l1d_write_misses(0); }
 
-  unsigned get_shmem_read_access() {
+  double get_shmem_access(bool aggregate_stat) {
     unsigned total_inst = 0;
     for (unsigned i = 0; i < m_config->num_shader(); i++) {
-      total_inst += (pwr_mem_stat->shmem_read_access[CURRENT_STAT_IDX][i]) -
-                    (pwr_mem_stat->shmem_read_access[PREV_STAT_IDX][i]);
+      if(aggregate_stat)
+        total_inst += (pwr_mem_stat->shmem_access[CURRENT_STAT_IDX][i]);
+      else
+        total_inst += (pwr_mem_stat->shmem_access[CURRENT_STAT_IDX][i]) -
+                    (pwr_mem_stat->shmem_access[PREV_STAT_IDX][i]);
     }
     return total_inst;
   }
 
-  unsigned get_l2_read_accesses() {
+  unsigned long long  get_l2_read_accesses(bool aggregate_stat) {
     enum mem_access_type access_type[] = {
         GLOBAL_ACC_R, LOCAL_ACC_R, CONST_ACC_R, TEXTURE_ACC_R, INST_ACC_R};
-    enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
+    enum cache_request_status request_status[] = {HIT, HIT_RESERVED, MISS, SECTOR_MISS}; 
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
-
-    return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+       return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->l2_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+    }
   }
 
-  unsigned get_l2_read_misses() {
-    enum mem_access_type access_type[] = {
+  unsigned long long get_l2_read_misses(bool aggregate_stat) {
+    return (get_l2_read_accesses(aggregate_stat) - get_l2_read_hits(aggregate_stat));
+  }
+
+  unsigned long long get_l2_read_hits(bool aggregate_stat) {
+       enum mem_access_type access_type[] = {
         GLOBAL_ACC_R, LOCAL_ACC_R, CONST_ACC_R, TEXTURE_ACC_R, INST_ACC_R};
-    enum cache_request_status request_status[] = {MISS};
+    enum cache_request_status request_status[] =  {HIT, HIT_RESERVED};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
-
-    return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+       return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->l2_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+    }
   }
 
-  unsigned get_l2_read_hits() {
-    return (get_l2_read_accesses() - get_l2_read_misses());
-  }
-
-  unsigned get_l2_write_accesses() {
+  unsigned long long get_l2_write_accesses(bool aggregate_stat) {
     enum mem_access_type access_type[] = {GLOBAL_ACC_W, LOCAL_ACC_W,
                                           L1_WRBK_ACC};
-    enum cache_request_status request_status[] = {HIT, MISS, HIT_RESERVED};
+    enum cache_request_status request_status[] = {HIT, HIT_RESERVED, MISS, SECTOR_MISS}; 
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
-
-    return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+      return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->l2_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+    }
   }
 
-  unsigned get_l2_write_misses() {
-    enum mem_access_type access_type[] = {GLOBAL_ACC_W, LOCAL_ACC_W,
+  unsigned long long get_l2_write_misses(bool aggregate_stat) {
+    return (get_l2_write_accesses(aggregate_stat) - get_l2_write_hits(aggregate_stat));
+  }
+  unsigned long long get_l2_write_hits(bool aggregate_stat) {
+        enum mem_access_type access_type[] = {GLOBAL_ACC_W, LOCAL_ACC_W,
                                           L1_WRBK_ACC};
-    enum cache_request_status request_status[] = {MISS};
+    enum cache_request_status request_status[] = {HIT, HIT_RESERVED};
     unsigned num_access_type =
         sizeof(access_type) / sizeof(enum mem_access_type);
     unsigned num_request_status =
         sizeof(request_status) / sizeof(enum cache_request_status);
-
-    return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+    if(aggregate_stat){
+      return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
+               access_type, num_access_type, request_status,
+               num_request_status));
+    }
+    else{
+      return (pwr_mem_stat->l2_cache_stats[CURRENT_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status)) -
            (pwr_mem_stat->l2_cache_stats[PREV_STAT_IDX].get_stats(
                access_type, num_access_type, request_status,
                num_request_status));
+    }
   }
-  unsigned get_l2_write_hits() {
-    return (get_l2_write_accesses() - get_l2_write_misses());
-  }
-  unsigned get_dram_cmd() {
+  double get_dram_cmd() {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
       total += (pwr_mem_stat->n_cmd[CURRENT_STAT_IDX][i] -
@@ -694,7 +1064,7 @@ class power_stat_t {
     }
     return total;
   }
-  unsigned get_dram_activity() {
+  double get_dram_activity() {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
       total += (pwr_mem_stat->n_activity[CURRENT_STAT_IDX][i] -
@@ -702,7 +1072,7 @@ class power_stat_t {
     }
     return total;
   }
-  unsigned get_dram_nop() {
+  double get_dram_nop() {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
       total += (pwr_mem_stat->n_nop[CURRENT_STAT_IDX][i] -
@@ -710,7 +1080,7 @@ class power_stat_t {
     }
     return total;
   }
-  unsigned get_dram_act() {
+  double get_dram_act() {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
       total += (pwr_mem_stat->n_act[CURRENT_STAT_IDX][i] -
@@ -718,31 +1088,49 @@ class power_stat_t {
     }
     return total;
   }
-  unsigned get_dram_pre() {
+  double get_dram_pre(bool aggregate_stat) {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
-      total += (pwr_mem_stat->n_pre[CURRENT_STAT_IDX][i] -
+      if(aggregate_stat){
+        total += pwr_mem_stat->n_pre[CURRENT_STAT_IDX][i];
+      }
+      else{
+        total += (pwr_mem_stat->n_pre[CURRENT_STAT_IDX][i] -
                 pwr_mem_stat->n_pre[PREV_STAT_IDX][i]);
+      }
     }
     return total;
   }
-  unsigned get_dram_rd() {
+  double get_dram_rd(bool aggregate_stat) {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
-      total += (pwr_mem_stat->n_rd[CURRENT_STAT_IDX][i] -
+      if(aggregate_stat){
+        total += pwr_mem_stat->n_rd[CURRENT_STAT_IDX][i];
+      }
+      else{
+        total += (pwr_mem_stat->n_rd[CURRENT_STAT_IDX][i] -
                 pwr_mem_stat->n_rd[PREV_STAT_IDX][i]);
+      }
     }
     return total;
   }
-  unsigned get_dram_wr() {
+  double get_dram_wr(bool aggregate_stat) {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
-      total += (pwr_mem_stat->n_wr[CURRENT_STAT_IDX][i] -
-                pwr_mem_stat->n_wr[PREV_STAT_IDX][i]);
+      if(aggregate_stat){
+        total += pwr_mem_stat->n_wr[CURRENT_STAT_IDX][i] + 
+                pwr_mem_stat->n_wr_WB[CURRENT_STAT_IDX][i];
+      }
+      else{
+        total += (pwr_mem_stat->n_wr[CURRENT_STAT_IDX][i] - 
+                pwr_mem_stat->n_wr[PREV_STAT_IDX][i]) +
+                (pwr_mem_stat->n_wr_WB[CURRENT_STAT_IDX][i] - 
+                pwr_mem_stat->n_wr_WB[PREV_STAT_IDX][i]);
+      }
     }
     return total;
   }
-  unsigned get_dram_req() {
+  double get_dram_req() {
     unsigned total = 0;
     for (unsigned i = 0; i < m_mem_config->m_n_mem; ++i) {
       total += (pwr_mem_stat->n_req[CURRENT_STAT_IDX][i] -
@@ -751,20 +1139,31 @@ class power_stat_t {
     return total;
   }
 
-  long get_icnt_simt_to_mem() {
+  unsigned long long get_icnt_simt_to_mem(bool aggregate_stat) {
     long total = 0;
-    for (unsigned i = 0; i < m_config->n_simt_clusters; ++i) {
-      total += (pwr_mem_stat->n_simt_to_mem[CURRENT_STAT_IDX][i] -
+    for (unsigned i = 0; i < m_config->n_simt_clusters; ++i){
+      if(aggregate_stat){
+        total += pwr_mem_stat->n_simt_to_mem[CURRENT_STAT_IDX][i];
+      }
+      else{
+        total += (pwr_mem_stat->n_simt_to_mem[CURRENT_STAT_IDX][i] -
                 pwr_mem_stat->n_simt_to_mem[PREV_STAT_IDX][i]);
+      }
     }
     return total;
   }
 
-  long get_icnt_mem_to_simt() {
+  unsigned long long get_icnt_mem_to_simt(bool aggregate_stat) {
     long total = 0;
     for (unsigned i = 0; i < m_config->n_simt_clusters; ++i) {
-      total += (pwr_mem_stat->n_mem_to_simt[CURRENT_STAT_IDX][i] -
+      if(aggregate_stat){
+        total += pwr_mem_stat->n_mem_to_simt[CURRENT_STAT_IDX][i];
+      }
+      
+      else{
+        total += (pwr_mem_stat->n_mem_to_simt[CURRENT_STAT_IDX][i] -
                 pwr_mem_stat->n_mem_to_simt[PREV_STAT_IDX][i]);
+      }
     }
     return total;
   }
diff --git a/src/gpgpu-sim/shader.cc b/src/gpgpu-sim/shader.cc
index bcfda18..9f8a129 100644
--- a/src/gpgpu-sim/shader.cc
+++ b/src/gpgpu-sim/shader.cc
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Wilson W.L. Fung, Ali Bakhoda,
-// George L. Yuan, Andrew Turner, Inderpreet Singh
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Wilson W.L. Fung, Ali Bakhoda,
+// George L. Yuan, Andrew Turner, Inderpreet Singh, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -485,6 +487,10 @@ shader_core_ctx::shader_core_ctx(class gpgpu_sim *gpu,
   m_sid = shader_id;
   m_tpc = tpc_id;
 
+  if(get_gpu()->get_config().g_power_simulation_enabled){
+    scaling_coeffs =  get_gpu()->get_scaling_coeffs();
+  }
+
   m_last_inst_gpu_sim_cycle = 0;
   m_last_inst_gpu_tot_sim_cycle = 0;
 
@@ -888,7 +894,7 @@ void shader_core_ctx::decode() {
     m_warp[m_inst_fetch_buffer.m_warp_id]->inc_inst_in_pipeline();
     if (pI1) {
       m_stats->m_num_decoded_insn[m_sid]++;
-      if (pI1->oprnd_type == INT_OP) {
+      if ((pI1->oprnd_type == INT_OP) || (pI1->oprnd_type == UN_OP))  { //these counters get added up in mcPat to compute scheduler power
         m_stats->m_num_INTdecoded_insn[m_sid]++;
       } else if (pI1->oprnd_type == FP_OP) {
         m_stats->m_num_FPdecoded_insn[m_sid]++;
@@ -899,7 +905,7 @@ void shader_core_ctx::decode() {
         m_warp[m_inst_fetch_buffer.m_warp_id]->ibuffer_fill(1, pI2);
         m_warp[m_inst_fetch_buffer.m_warp_id]->inc_inst_in_pipeline();
         m_stats->m_num_decoded_insn[m_sid]++;
-        if (pI2->oprnd_type == INT_OP) {
+        if ((pI1->oprnd_type == INT_OP) || (pI1->oprnd_type == UN_OP))  { //these counters get added up in mcPat to compute scheduler power
           m_stats->m_num_INTdecoded_insn[m_sid]++;
         } else if (pI2->oprnd_type == FP_OP) {
           m_stats->m_num_FPdecoded_insn[m_sid]++;
@@ -982,8 +988,10 @@ void shader_core_ctx::fetch() {
               m_gpu->gpu_tot_sim_cycle + m_gpu->gpu_sim_cycle);
           std::list<cache_event> events;
           enum cache_request_status status;
-          if (m_config->perfect_inst_const_cache)
+          if (m_config->perfect_inst_const_cache){
             status = HIT;
+            shader_cache_access_log(m_sid, INSTRUCTION, 0);
+          }
           else
             status = m_L1I->access(
                 (new_addr_type)ppc, mf,
@@ -2275,7 +2283,7 @@ void sp_unit::active_lanes_in_pipeline() {
 void dp_unit::active_lanes_in_pipeline() {
   unsigned active_count = pipelined_simd_unit::get_active_lanes_in_pipeline();
   assert(active_count <= m_core->get_config()->warp_size);
-  m_core->incspactivelanes_stat(active_count);
+  //m_core->incspactivelanes_stat(active_count);
   m_core->incfuactivelanes_stat(active_count);
   m_core->incfumemactivelanes_stat(active_count);
 }
@@ -3079,52 +3087,69 @@ void warp_inst_t::print(FILE *fout) const {
   m_config->gpgpu_ctx->func_sim->ptx_print_insn(pc, fout);
   fprintf(fout, "\n");
 }
-void shader_core_ctx::incexecstat(warp_inst_t *&inst) {
-  if (inst->mem_op == TEX) inctex_stat(inst->active_count(), 1);
-
-  // Latency numbers for next operations are used to scale the power values
-  // for special operations, according observations from microbenchmarking
-  // TODO: put these numbers in the xml configuration
-
-  switch (inst->sp_op) {
+void shader_core_ctx::incexecstat(warp_inst_t *&inst)
+{
+    // Latency numbers for next operations are used to scale the power values
+    // for special operations, according observations from microbenchmarking
+    // TODO: put these numbers in the xml configuration
+  if(get_gpu()->get_config().g_power_simulation_enabled){
+    switch(inst->sp_op){
     case INT__OP:
-      incialu_stat(inst->active_count(), 32);
+      incialu_stat(inst->active_count(), scaling_coeffs->int_coeff);
       break;
     case INT_MUL_OP:
-      incimul_stat(inst->active_count(), 7.2);
+      incimul_stat(inst->active_count(), scaling_coeffs->int_mul_coeff);
       break;
     case INT_MUL24_OP:
-      incimul24_stat(inst->active_count(), 4.2);
+      incimul24_stat(inst->active_count(), scaling_coeffs->int_mul24_coeff);
       break;
     case INT_MUL32_OP:
-      incimul32_stat(inst->active_count(), 4);
+      incimul32_stat(inst->active_count(), scaling_coeffs->int_mul32_coeff);
       break;
     case INT_DIV_OP:
-      incidiv_stat(inst->active_count(), 40);
+      incidiv_stat(inst->active_count(), scaling_coeffs->int_div_coeff);
       break;
     case FP__OP:
-      incfpalu_stat(inst->active_count(), 1);
+      incfpalu_stat(inst->active_count(),scaling_coeffs->fp_coeff);
       break;
     case FP_MUL_OP:
-      incfpmul_stat(inst->active_count(), 1.8);
+      incfpmul_stat(inst->active_count(), scaling_coeffs->fp_mul_coeff);
       break;
     case FP_DIV_OP:
-      incfpdiv_stat(inst->active_count(), 48);
+      incfpdiv_stat(inst->active_count(), scaling_coeffs->fp_div_coeff);
+      break;
+    case DP___OP:
+      incdpalu_stat(inst->active_count(), scaling_coeffs->dp_coeff);
+      break;
+    case DP_MUL_OP:
+      incdpmul_stat(inst->active_count(), scaling_coeffs->dp_mul_coeff);
+      break;
+    case DP_DIV_OP:
+      incdpdiv_stat(inst->active_count(), scaling_coeffs->dp_div_coeff);
       break;
     case FP_SQRT_OP:
-      inctrans_stat(inst->active_count(), 25);
+      incsqrt_stat(inst->active_count(), scaling_coeffs->sqrt_coeff);
       break;
     case FP_LG_OP:
-      inctrans_stat(inst->active_count(), 35);
+      inclog_stat(inst->active_count(), scaling_coeffs->log_coeff);
       break;
     case FP_SIN_OP:
-      inctrans_stat(inst->active_count(), 12);
+      incsin_stat(inst->active_count(), scaling_coeffs->sin_coeff);
       break;
     case FP_EXP_OP:
-      inctrans_stat(inst->active_count(), 35);
+      incexp_stat(inst->active_count(), scaling_coeffs->exp_coeff);
+      break;
+    case TENSOR__OP:
+      inctensor_stat(inst->active_count(), scaling_coeffs->tensor_coeff);
+      break;
+    case TEX__OP:
+      inctex_stat(inst->active_count(), scaling_coeffs->tex_coeff);
       break;
     default:
       break;
+    }
+    if(inst->const_cache_operand) //warp has const address space load as one operand
+      inc_const_accesses(1);
   }
 }
 void shader_core_ctx::print_stage(unsigned int stage, FILE *fout) const {
diff --git a/src/gpgpu-sim/shader.h b/src/gpgpu-sim/shader.h
index f2fac12..d80476f 100644
--- a/src/gpgpu-sim/shader.h
+++ b/src/gpgpu-sim/shader.h
@@ -1,19 +1,21 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Wilson W.L. Fung, Andrew Turner,
-// Ali Bakhoda
-// The University of British Columbia
+// Copyright (c) 2009-2021, Tor M. Aamodt, Wilson W.L. Fung, Andrew Turner,
+// Ali Bakhoda, Vijay Kandiah, Nikos Hardavellas, 
+// Mahmoud Khairy, Junrui Pan, Timothy G. Rogers
+// The University of British Columbia, Northwestern University, Purdue University
 // All rights reserved.
 //
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are met:
 //
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
+// 1. Redistributions of source code must retain the above copyright notice, this
+//    list of conditions and the following disclaimer;
+// 2. Redistributions in binary form must reproduce the above copyright notice,
+//    this list of conditions and the following disclaimer in the documentation
+//    and/or other materials provided with the distribution;
+// 3. Neither the names of The University of British Columbia, Northwestern 
+//    University nor the names of their contributors may be used to
+//    endorse or promote products derived from this software without specific
+//    prior written permission.
 //
 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
@@ -1709,18 +1711,26 @@ struct shader_core_stats_pod {
   unsigned *m_num_INTdecoded_insn;
   unsigned *m_num_storequeued_insn;
   unsigned *m_num_loadqueued_insn;
-  unsigned *m_num_ialu_acesses;
-  unsigned *m_num_fp_acesses;
-  unsigned *m_num_imul_acesses;
   unsigned *m_num_tex_inst;
-  unsigned *m_num_fpmul_acesses;
-  unsigned *m_num_idiv_acesses;
-  unsigned *m_num_fpdiv_acesses;
-  unsigned *m_num_sp_acesses;
-  unsigned *m_num_sfu_acesses;
-  unsigned *m_num_tensor_core_acesses;
-  unsigned *m_num_trans_acesses;
-  unsigned *m_num_mem_acesses;
+  double *m_num_ialu_acesses;
+  double *m_num_fp_acesses;
+  double *m_num_imul_acesses;
+  double *m_num_fpmul_acesses;
+  double *m_num_idiv_acesses;
+  double *m_num_fpdiv_acesses;
+  double *m_num_sp_acesses;
+  double *m_num_sfu_acesses;
+  double *m_num_tensor_core_acesses;
+  double *m_num_tex_acesses;
+  double *m_num_const_acesses;
+  double *m_num_dp_acesses;
+  double *m_num_dpmul_acesses;
+  double *m_num_dpdiv_acesses;
+  double *m_num_sqrt_acesses;
+  double *m_num_log_acesses;
+  double *m_num_sin_acesses;
+  double *m_num_exp_acesses;
+  double *m_num_mem_acesses;
   unsigned *m_num_sp_committed;
   unsigned *m_num_tlb_hits;
   unsigned *m_num_tlb_accesses;
@@ -1730,13 +1740,15 @@ struct shader_core_stats_pod {
   unsigned *m_read_regfile_acesses;
   unsigned *m_write_regfile_acesses;
   unsigned *m_non_rf_operands;
-  unsigned *m_num_imul24_acesses;
-  unsigned *m_num_imul32_acesses;
+  double *m_num_imul24_acesses;
+  double *m_num_imul32_acesses;
   unsigned *m_active_sp_lanes;
   unsigned *m_active_sfu_lanes;
   unsigned *m_active_tensor_core_lanes;
   unsigned *m_active_fu_lanes;
   unsigned *m_active_fu_mem_lanes;
+  double *m_active_exu_threads; //For power model
+  double *m_active_exu_warps; //For power model
   unsigned *m_n_diverge;  // number of divergence occurring in this shader
   unsigned gpgpu_n_load_insn;
   unsigned gpgpu_n_store_insn;
@@ -1807,38 +1819,56 @@ class shader_core_stats : public shader_core_stats_pod {
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_num_loadqueued_insn =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+    m_num_tex_inst = 
+        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_num_INTdecoded_insn =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_num_ialu_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_fp_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
-    m_num_tex_inst = (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_imul_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_imul24_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_imul32_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_fpmul_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_idiv_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_fpdiv_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
+    m_num_dp_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
+    m_num_dpmul_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
+    m_num_dpdiv_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
     m_num_sp_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_sfu_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
-    m_num_tensor_core_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
-    m_num_trans_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
+    m_num_tensor_core_acesses = 
+        (double *)calloc(config->num_shader(), sizeof(double));
+    m_num_const_acesses =
+        (double *)calloc(config->num_shader(), sizeof(double));
+    m_num_tex_acesses =
+        (double *)calloc(config->num_shader(), sizeof(double));
+    m_num_sqrt_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
+    m_num_log_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
+    m_num_sin_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
+    m_num_exp_acesses = 
+        (double*) calloc(config->num_shader(),sizeof(double));
     m_num_mem_acesses =
-        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_num_sp_committed =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
-    m_num_tlb_hits = (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+    m_num_tlb_hits = 
+        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_num_tlb_accesses =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_active_sp_lanes =
@@ -1849,6 +1879,10 @@ class shader_core_stats : public shader_core_stats_pod {
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_active_fu_lanes =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+    m_active_exu_threads =
+        (double *)calloc(config->num_shader(), sizeof(double));
+    m_active_exu_warps =
+        (double *)calloc(config->num_shader(), sizeof(double));
     m_active_fu_mem_lanes =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_num_sfu_committed =
@@ -1863,7 +1897,8 @@ class shader_core_stats : public shader_core_stats_pod {
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     m_non_rf_operands =
         (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
-    m_n_diverge = (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
+    m_n_diverge = 
+        (unsigned *)calloc(config->num_shader(), sizeof(unsigned));
     shader_cycle_distro =
         (unsigned *)calloc(config->warp_size + 3, sizeof(unsigned));
     last_shader_cycle_distro =
@@ -1892,6 +1927,48 @@ class shader_core_stats : public shader_core_stats_pod {
     delete m_incoming_traffic_stats;
     free(m_num_sim_insn);
     free(m_num_sim_winsn);
+    free(m_num_FPdecoded_insn);
+    free(m_num_INTdecoded_insn);
+    free(m_num_storequeued_insn);
+    free(m_num_loadqueued_insn);
+    free(m_num_ialu_acesses);
+    free(m_num_fp_acesses);
+    free(m_num_imul_acesses);
+    free(m_num_tex_inst);
+    free(m_num_fpmul_acesses);
+    free(m_num_idiv_acesses);
+    free(m_num_fpdiv_acesses);
+    free(m_num_sp_acesses);
+    free(m_num_sfu_acesses);
+    free(m_num_tensor_core_acesses);
+    free(m_num_tex_acesses);
+    free(m_num_const_acesses);
+    free(m_num_dp_acesses);
+    free(m_num_dpmul_acesses);
+    free(m_num_dpdiv_acesses);
+    free(m_num_sqrt_acesses);
+    free(m_num_log_acesses);
+    free(m_num_sin_acesses);
+    free(m_num_exp_acesses);
+    free(m_num_mem_acesses);
+    free(m_num_sp_committed);
+    free(m_num_tlb_hits);
+    free(m_num_tlb_accesses);
+    free(m_num_sfu_committed);
+    free(m_num_tensor_core_committed);
+    free(m_num_mem_committed);
+    free(m_read_regfile_acesses);
+    free(m_write_regfile_acesses);
+    free(m_non_rf_operands);
+    free(m_num_imul24_acesses);
+    free(m_num_imul32_acesses);
+    free(m_active_sp_lanes);
+    free(m_active_sfu_lanes);
+    free(m_active_tensor_core_lanes);
+    free(m_active_fu_lanes);
+    free(m_active_exu_threads);
+    free(m_active_exu_warps);
+    free(m_active_fu_mem_lanes);
     free(m_n_diverge);
     free(shader_cycle_distro);
     free(last_shader_cycle_distro);
@@ -1996,7 +2073,7 @@ class shader_core_ctx : public core_t {
     printf("GPGPU-Sim uArch: Shader %d bind to kernel %u \'%s\'\n", m_sid,
            m_kernel->get_uid(), m_kernel->name().c_str());
   }
-
+  PowerscalingCoefficients *scaling_coeffs;
   // accessors
   bool fetch_unit_response_buffer_full() const;
   bool ldst_unit_response_buffer_full() const;
@@ -2054,119 +2131,206 @@ class shader_core_ctx : public core_t {
 
   void incload_stat() { m_stats->m_num_loadqueued_insn[m_sid]++; }
   void incstore_stat() { m_stats->m_num_storequeued_insn[m_sid]++; }
-  void incialu_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_ialu_acesses[m_sid] =
-          m_stats->m_num_ialu_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_nonsfu(active_count, latency);
-    } else {
-      m_stats->m_num_ialu_acesses[m_sid] =
-          m_stats->m_num_ialu_acesses[m_sid] + active_count * latency;
+  void incialu_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_ialu_acesses[m_sid]=m_stats->m_num_ialu_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+      m_stats->m_num_ialu_acesses[m_sid]=m_stats->m_num_ialu_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
   }
-  void inctex_stat(unsigned active_count, double latency) {
-    m_stats->m_num_tex_inst[m_sid] =
-        m_stats->m_num_tex_inst[m_sid] + active_count * latency;
-  }
-  void incimul_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_imul_acesses[m_sid] =
-          m_stats->m_num_imul_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_nonsfu(active_count, latency);
-    } else {
-      m_stats->m_num_imul_acesses[m_sid] =
-          m_stats->m_num_imul_acesses[m_sid] + active_count * latency;
+  void incimul_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_imul_acesses[m_sid]=m_stats->m_num_imul_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+      m_stats->m_num_imul_acesses[m_sid]=m_stats->m_num_imul_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
   }
-  void incimul24_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_imul24_acesses[m_sid] =
-          m_stats->m_num_imul24_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_nonsfu(active_count, latency);
-    } else {
-      m_stats->m_num_imul24_acesses[m_sid] =
-          m_stats->m_num_imul24_acesses[m_sid] + active_count * latency;
+  void incimul24_stat(unsigned active_count,double latency) {
+  if(m_config->gpgpu_clock_gated_lanes==false){
+    m_stats->m_num_imul24_acesses[m_sid]=m_stats->m_num_imul24_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+      m_stats->m_num_imul24_acesses[m_sid]=m_stats->m_num_imul24_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;    
+   }
+   void incimul32_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_imul32_acesses[m_sid]=m_stats->m_num_imul32_acesses[m_sid]+(double)active_count*latency
+         + inactive_lanes_accesses_sfu(active_count, latency);          
+    }else{
+      m_stats->m_num_imul32_acesses[m_sid]=m_stats->m_num_imul32_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
   }
-  void incimul32_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_imul32_acesses[m_sid] =
-          m_stats->m_num_imul32_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_sfu(active_count, latency);
-    } else {
-      m_stats->m_num_imul32_acesses[m_sid] =
-          m_stats->m_num_imul32_acesses[m_sid] + active_count * latency;
+   void incidiv_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_idiv_acesses[m_sid]=m_stats->m_num_idiv_acesses[m_sid]+(double)active_count*latency
+         + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else {
+      m_stats->m_num_idiv_acesses[m_sid]=m_stats->m_num_idiv_acesses[m_sid]+(double)active_count*latency;
     }
-    // printf("Int_Mul -- Active_count: %d\n",active_count);
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;    
   }
-  void incidiv_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_idiv_acesses[m_sid] =
-          m_stats->m_num_idiv_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_sfu(active_count, latency);
-    } else {
-      m_stats->m_num_idiv_acesses[m_sid] =
-          m_stats->m_num_idiv_acesses[m_sid] + active_count * latency;
+   void incfpalu_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_fp_acesses[m_sid]=m_stats->m_num_fp_acesses[m_sid]+(double)active_count*latency
+         + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+    m_stats->m_num_fp_acesses[m_sid]=m_stats->m_num_fp_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;     
   }
-  void incfpalu_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_fp_acesses[m_sid] =
-          m_stats->m_num_fp_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_nonsfu(active_count, latency);
-    } else {
-      m_stats->m_num_fp_acesses[m_sid] =
-          m_stats->m_num_fp_acesses[m_sid] + active_count * latency;
+   void incfpmul_stat(unsigned active_count,double latency) {
+              // printf("FP MUL stat increament\n");
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_fpmul_acesses[m_sid]=m_stats->m_num_fpmul_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+    m_stats->m_num_fpmul_acesses[m_sid]=m_stats->m_num_fpmul_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+   }
+   void incfpdiv_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_fpdiv_acesses[m_sid]=m_stats->m_num_fpdiv_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else {
+      m_stats->m_num_fpdiv_acesses[m_sid]=m_stats->m_num_fpdiv_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+   }
+   void incdpalu_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_dp_acesses[m_sid]=m_stats->m_num_dp_acesses[m_sid]+(double)active_count*latency
+         + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+    m_stats->m_num_dp_acesses[m_sid]=m_stats->m_num_dp_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++; 
+   }
+   void incdpmul_stat(unsigned active_count,double latency) {
+              // printf("FP MUL stat increament\n");
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_dpmul_acesses[m_sid]=m_stats->m_num_dpmul_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_nonsfu(active_count, latency);
+    }else {
+    m_stats->m_num_dpmul_acesses[m_sid]=m_stats->m_num_dpmul_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+   }
+   void incdpdiv_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_dpdiv_acesses[m_sid]=m_stats->m_num_dpdiv_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else {
+      m_stats->m_num_dpdiv_acesses[m_sid]=m_stats->m_num_dpdiv_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+   }
+
+   void incsqrt_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_sqrt_acesses[m_sid]=m_stats->m_num_sqrt_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else{
+      m_stats->m_num_sqrt_acesses[m_sid]=m_stats->m_num_sqrt_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+   }
+
+   void inclog_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_log_acesses[m_sid]=m_stats->m_num_log_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else{
+      m_stats->m_num_log_acesses[m_sid]=m_stats->m_num_log_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+   }
+
+   void incexp_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_exp_acesses[m_sid]=m_stats->m_num_exp_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else{
+      m_stats->m_num_exp_acesses[m_sid]=m_stats->m_num_exp_acesses[m_sid]+(double)active_count*latency;
+    }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
   }
-  void incfpmul_stat(unsigned active_count, double latency) {
-    // printf("FP MUL stat increament\n");
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_fpmul_acesses[m_sid] =
-          m_stats->m_num_fpmul_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_nonsfu(active_count, latency);
-    } else {
-      m_stats->m_num_fpmul_acesses[m_sid] =
-          m_stats->m_num_fpmul_acesses[m_sid] + active_count * latency;
+
+   void incsin_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_sin_acesses[m_sid]=m_stats->m_num_sin_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else{
+      m_stats->m_num_sin_acesses[m_sid]=m_stats->m_num_sin_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
   }
-  void incfpdiv_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_fpdiv_acesses[m_sid] =
-          m_stats->m_num_fpdiv_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_sfu(active_count, latency);
-    } else {
-      m_stats->m_num_fpdiv_acesses[m_sid] =
-          m_stats->m_num_fpdiv_acesses[m_sid] + active_count * latency;
+
+
+   void inctensor_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_tensor_core_acesses[m_sid]=m_stats->m_num_tensor_core_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else{
+      m_stats->m_num_tensor_core_acesses[m_sid]=m_stats->m_num_tensor_core_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
   }
-  void inctrans_stat(unsigned active_count, double latency) {
-    if (m_config->gpgpu_clock_gated_lanes == false) {
-      m_stats->m_num_trans_acesses[m_sid] =
-          m_stats->m_num_trans_acesses[m_sid] + active_count * latency +
-          inactive_lanes_accesses_sfu(active_count, latency);
-    } else {
-      m_stats->m_num_trans_acesses[m_sid] =
-          m_stats->m_num_trans_acesses[m_sid] + active_count * latency;
+
+  void inctex_stat(unsigned active_count,double latency) {
+    if(m_config->gpgpu_clock_gated_lanes==false){
+      m_stats->m_num_tex_acesses[m_sid]=m_stats->m_num_tex_acesses[m_sid]+(double)active_count*latency
+        + inactive_lanes_accesses_sfu(active_count, latency); 
+    }else{
+      m_stats->m_num_tex_acesses[m_sid]=m_stats->m_num_tex_acesses[m_sid]+(double)active_count*latency;
     }
+    m_stats->m_active_exu_threads[m_sid]+=active_count;
+    m_stats->m_active_exu_warps[m_sid]++;
+  }
+
+  void inc_const_accesses(unsigned active_count) {
+    m_stats->m_num_const_acesses[m_sid]=m_stats->m_num_const_acesses[m_sid]+active_count;
   }
 
   void incsfu_stat(unsigned active_count, double latency) {
     m_stats->m_num_sfu_acesses[m_sid] =
-        m_stats->m_num_sfu_acesses[m_sid] + active_count * latency;
+        m_stats->m_num_sfu_acesses[m_sid] + (double)active_count*latency;
   }
   void incsp_stat(unsigned active_count, double latency) {
     m_stats->m_num_sp_acesses[m_sid] =
-        m_stats->m_num_sp_acesses[m_sid] + active_count * latency;
+        m_stats->m_num_sp_acesses[m_sid] + (double)active_count*latency;
   }
   void incmem_stat(unsigned active_count, double latency) {
     if (m_config->gpgpu_clock_gated_lanes == false) {
       m_stats->m_num_mem_acesses[m_sid] =
-          m_stats->m_num_mem_acesses[m_sid] + active_count * latency +
+          m_stats->m_num_mem_acesses[m_sid] + (double)active_count*latency +
           inactive_lanes_accesses_nonsfu(active_count, latency);
     } else {
       m_stats->m_num_mem_acesses[m_sid] =
-          m_stats->m_num_mem_acesses[m_sid] + active_count * latency;
+          m_stats->m_num_mem_acesses[m_sid] + (double)active_count*latency;
     }
   }
   void incexecstat(warp_inst_t *&inst);
diff --git a/src/gpgpu-sim/stat-tool.cc b/src/gpgpu-sim/stat-tool.cc
index 6fafaa6..0513d17 100644
--- a/src/gpgpu-sim/stat-tool.cc
+++ b/src/gpgpu-sim/stat-tool.cc
@@ -369,8 +369,6 @@ void shader_mem_lat_print(FILE *fout) {
 static int s_cache_access_logger_n_types = 0;
 static std::vector<linear_histogram_logger> s_cache_access_logger;
 
-enum cache_access_logger_types { NORMALS, TEXTURE, CONSTANT, INSTRUCTION };
-
 int get_shader_normal_cache_id() { return NORMALS; }
 int get_shader_texture_cache_id() { return TEXTURE; }
 int get_shader_constant_cache_id() { return CONSTANT; }
diff --git a/src/gpgpu-sim/stat-tool.h b/src/gpgpu-sim/stat-tool.h
index 3a291be..fdf8756 100644
--- a/src/gpgpu-sim/stat-tool.h
+++ b/src/gpgpu-sim/stat-tool.h
@@ -268,6 +268,8 @@ class linear_histogram_logger : public snap_shot_trigger,
   static int s_ids;
 };
 
+enum cache_access_logger_types { NORMALS, TEXTURE, CONSTANT, INSTRUCTION };
+
 void try_snap_shot(unsigned long long current_cycle);
 void set_spill_interval(unsigned long long interval);
 void spill_log_to_file(FILE *fout, int final, unsigned long long current_cycle);
diff --git a/src/gpuwattch/gpgpu_sim_wrapper.cc b/src/gpuwattch/gpgpu_sim_wrapper.cc
deleted file mode 100644
index f2989f6..0000000
--- a/src/gpuwattch/gpgpu_sim_wrapper.cc
+++ /dev/null
@@ -1,863 +0,0 @@
-// Copyright (c) 2009-2011, Tor M. Aamodt, Tayler Hetherington, Ahmed ElTantawy,
-// The University of British Columbia
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are met:
-//
-// Redistributions of source code must retain the above copyright notice, this
-// list of conditions and the following disclaimer.
-// Redistributions in binary form must reproduce the above copyright notice,
-// this list of conditions and the following disclaimer in the documentation
-// and/or other materials provided with the distribution. Neither the name of
-// The University of British Columbia nor the names of its contributors may be
-// used to endorse or promote products derived from this software without
-// specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-// POSSIBILITY OF SUCH DAMAGE.
-
-#include "gpgpu_sim_wrapper.h"
-#include <sys/stat.h>
-#define SP_BASE_POWER 0
-#define SFU_BASE_POWER 0
-
-static const char* pwr_cmp_label[] = {
-    "IBP,", "ICP,",  "DCP,",   "TCP,",   "CCP,",        "SHRDP,",
-    "RFP,", "SPP,",  "SFUP,",  "FPUP,",  "SCHEDP,",     "L2CP,",
-    "MCP,", "NOCP,", "DRAMP,", "PIPEP,", "IDLE_COREP,", "CONST_DYNAMICP"};
-
-enum pwr_cmp_t {
-  IBP = 0,
-  ICP,
-  DCP,
-  TCP,
-  CCP,
-  SHRDP,
-  RFP,
-  SPP,
-  SFUP,
-  FPUP,
-  SCHEDP,
-  L2CP,
-  MCP,
-  NOCP,
-  DRAMP,
-  PIPEP,
-  IDLE_COREP,
-  CONST_DYNAMICP,
-  NUM_COMPONENTS_MODELLED
-};
-
-gpgpu_sim_wrapper::gpgpu_sim_wrapper(bool power_simulation_enabled,
-                                     char* xmlfile) {
-  kernel_sample_count = 0;
-  total_sample_count = 0;
-
-  kernel_tot_power = 0;
-
-  num_pwr_cmps = NUM_COMPONENTS_MODELLED;
-  num_perf_counters = NUM_PERFORMANCE_COUNTERS;
-
-  // Initialize per-component counter/power vectors
-  avg_max_min_counters<double> init;
-  kernel_cmp_pwr.resize(NUM_COMPONENTS_MODELLED, init);
-  kernel_cmp_perf_counters.resize(NUM_PERFORMANCE_COUNTERS, init);
-
-  kernel_power = init;   // Per-kernel powers
-  gpu_tot_power = init;  // Global powers
-
-  sample_cmp_pwr.resize(NUM_COMPONENTS_MODELLED, 0);
-
-  sample_perf_counters.resize(NUM_PERFORMANCE_COUNTERS, 0);
-  initpower_coeff.resize(NUM_PERFORMANCE_COUNTERS, 0);
-  effpower_coeff.resize(NUM_PERFORMANCE_COUNTERS, 0);
-
-  const_dynamic_power = 0;
-  proc_power = 0;
-
-  g_power_filename = NULL;
-  g_power_trace_filename = NULL;
-  g_metric_trace_filename = NULL;
-  g_steady_state_tracking_filename = NULL;
-  xml_filename = xmlfile;
-  g_power_simulation_enabled = power_simulation_enabled;
-  g_power_trace_enabled = false;
-  g_steady_power_levels_enabled = false;
-  g_power_trace_zlevel = 0;
-  g_power_per_cycle_dump = false;
-  gpu_steady_power_deviation = 0;
-  gpu_steady_min_period = 0;
-
-  gpu_stat_sample_freq = 0;
-  p = new ParseXML();
-  if (g_power_simulation_enabled) {
-    p->parse(xml_filename);
-  }
-  proc = new Processor(p);
-  power_trace_file = NULL;
-  metric_trace_file = NULL;
-  steady_state_tacking_file = NULL;
-  has_written_avg = false;
-  init_inst_val = false;
-}
-
-gpgpu_sim_wrapper::~gpgpu_sim_wrapper() {}
-
-bool gpgpu_sim_wrapper::sanity_check(double a, double b) {
-  if (b == 0)
-    return (abs(a - b) < 0.00001);
-  else
-    return (abs(a - b) / abs(b) < 0.00001);
-
-  return false;
-}
-void gpgpu_sim_wrapper::init_mcpat(
-    char* xmlfile, char* powerfilename, char* power_trace_filename,
-    char* metric_trace_filename, char* steady_state_filename,
-    bool power_sim_enabled, bool trace_enabled, bool steady_state_enabled,
-    bool power_per_cycle_dump, double steady_power_deviation,
-    double steady_min_period, int zlevel, double init_val,
-    int stat_sample_freq) {
-  // Write File Headers for (-metrics trace, -power trace)
-
-  reset_counters();
-  static bool mcpat_init = true;
-
-  // initialize file name if it is not set
-  time_t curr_time;
-  time(&curr_time);
-  char* date = ctime(&curr_time);
-  char* s = date;
-  while (*s) {
-    if (*s == ' ' || *s == '\t' || *s == ':') *s = '-';
-    if (*s == '\n' || *s == '\r') *s = 0;
-    s++;
-  }
-
-  if (mcpat_init) {
-    g_power_filename = powerfilename;
-    g_power_trace_filename = power_trace_filename;
-    g_metric_trace_filename = metric_trace_filename;
-    g_steady_state_tracking_filename = steady_state_filename;
-    xml_filename = xmlfile;
-    g_power_simulation_enabled = power_sim_enabled;
-    g_power_trace_enabled = trace_enabled;
-    g_steady_power_levels_enabled = steady_state_enabled;
-    g_power_trace_zlevel = zlevel;
-    g_power_per_cycle_dump = power_per_cycle_dump;
-    gpu_steady_power_deviation = steady_power_deviation;
-    gpu_steady_min_period = steady_min_period;
-
-    gpu_stat_sample_freq = stat_sample_freq;
-
-    // p->sys.total_cycles=gpu_stat_sample_freq*4;
-    p->sys.total_cycles = gpu_stat_sample_freq;
-    power_trace_file = NULL;
-    metric_trace_file = NULL;
-    steady_state_tacking_file = NULL;
-
-    if (g_power_trace_enabled) {
-      power_trace_file = gzopen(g_power_trace_filename, "w");
-      metric_trace_file = gzopen(g_metric_trace_filename, "w");
-      if ((power_trace_file == NULL) || (metric_trace_file == NULL)) {
-        printf("error - could not open trace files \n");
-        exit(1);
-      }
-      gzsetparams(power_trace_file, g_power_trace_zlevel, Z_DEFAULT_STRATEGY);
-
-      gzprintf(power_trace_file, "power,");
-      for (unsigned i = 0; i < num_pwr_cmps; i++) {
-        gzprintf(power_trace_file, pwr_cmp_label[i]);
-      }
-      gzprintf(power_trace_file, "\n");
-
-      gzsetparams(metric_trace_file, g_power_trace_zlevel, Z_DEFAULT_STRATEGY);
-      for (unsigned i = 0; i < num_perf_counters; i++) {
-        gzprintf(metric_trace_file, perf_count_label[i]);
-      }
-      gzprintf(metric_trace_file, "\n");
-
-      gzclose(power_trace_file);
-      gzclose(metric_trace_file);
-    }
-    if (g_steady_power_levels_enabled) {
-      steady_state_tacking_file = gzopen(g_steady_state_tracking_filename, "w");
-      if ((steady_state_tacking_file == NULL)) {
-        printf("error - could not open trace files \n");
-        exit(1);
-      }
-      gzsetparams(steady_state_tacking_file, g_power_trace_zlevel,
-                  Z_DEFAULT_STRATEGY);
-      gzprintf(steady_state_tacking_file, "start,end,power,IPC,");
-      for (unsigned i = 0; i < num_perf_counters; i++) {
-        gzprintf(steady_state_tacking_file, perf_count_label[i]);
-      }
-      gzprintf(steady_state_tacking_file, "\n");
-
-      gzclose(steady_state_tacking_file);
-    }
-
-    mcpat_init = false;
-    has_written_avg = false;
-    powerfile.open(g_power_filename);
-    int flg = chmod(g_power_filename, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
-    assert(flg == 0);
-  }
-  sample_val = 0;
-  init_inst_val = init_val;  // gpu_tot_sim_insn+gpu_sim_insn;
-}
-
-void gpgpu_sim_wrapper::reset_counters() {
-  avg_max_min_counters<double> init;
-  for (unsigned i = 0; i < num_perf_counters; ++i) {
-    sample_perf_counters[i] = 0;
-    kernel_cmp_perf_counters[i] = init;
-  }
-  for (unsigned i = 0; i < num_pwr_cmps; ++i) {
-    sample_cmp_pwr[i] = 0;
-    kernel_cmp_pwr[i] = init;
-  }
-
-  // Reset per-kernel counters
-  kernel_sample_count = 0;
-  kernel_tot_power = 0;
-  kernel_power = init;
-
-  return;
-}
-
-void gpgpu_sim_wrapper::set_inst_power(bool clk_gated_lanes, double tot_cycles,
-                                       double busy_cycles, double tot_inst,
-                                       double int_inst, double fp_inst,
-                                       double load_inst, double store_inst,
-                                       double committed_inst) {
-  p->sys.core[0].gpgpu_clock_gated_lanes = clk_gated_lanes;
-  p->sys.core[0].total_cycles = tot_cycles;
-  p->sys.core[0].busy_cycles = busy_cycles;
-  p->sys.core[0].total_instructions =
-      tot_inst * p->sys.scaling_coefficients[TOT_INST];
-  p->sys.core[0].int_instructions =
-      int_inst * p->sys.scaling_coefficients[FP_INT];
-  p->sys.core[0].fp_instructions =
-      fp_inst * p->sys.scaling_coefficients[FP_INT];
-  p->sys.core[0].load_instructions = load_inst;
-  p->sys.core[0].store_instructions = store_inst;
-  p->sys.core[0].committed_instructions = committed_inst;
-  sample_perf_counters[FP_INT] = int_inst + fp_inst;
-  sample_perf_counters[TOT_INST] = tot_inst;
-}
-
-void gpgpu_sim_wrapper::set_regfile_power(double reads, double writes,
-                                          double ops) {
-  p->sys.core[0].int_regfile_reads =
-      reads * p->sys.scaling_coefficients[REG_RD];
-  p->sys.core[0].int_regfile_writes =
-      writes * p->sys.scaling_coefficients[REG_WR];
-  p->sys.core[0].non_rf_operands =
-      ops * p->sys.scaling_coefficients[NON_REG_OPs];
-  sample_perf_counters[REG_RD] = reads;
-  sample_perf_counters[REG_WR] = writes;
-  sample_perf_counters[NON_REG_OPs] = ops;
-}
-
-void gpgpu_sim_wrapper::set_icache_power(double hits, double misses) {
-  p->sys.core[0].icache.read_accesses =
-      hits * p->sys.scaling_coefficients[IC_H] +
-      misses * p->sys.scaling_coefficients[IC_M];
-  p->sys.core[0].icache.read_misses =
-      misses * p->sys.scaling_coefficients[IC_M];
-  sample_perf_counters[IC_H] = hits;
-  sample_perf_counters[IC_M] = misses;
-}
-
-void gpgpu_sim_wrapper::set_ccache_power(double hits, double misses) {
-  p->sys.core[0].ccache.read_accesses =
-      hits * p->sys.scaling_coefficients[CC_H] +
-      misses * p->sys.scaling_coefficients[CC_M];
-  p->sys.core[0].ccache.read_misses =
-      misses * p->sys.scaling_coefficients[CC_M];
-  sample_perf_counters[CC_H] = hits;
-  sample_perf_counters[CC_M] = misses;
-  // TODO: coalescing logic is counted as part of the caches power (this is not
-  // valid for no-caches architectures)
-}
-
-void gpgpu_sim_wrapper::set_tcache_power(double hits, double misses) {
-  p->sys.core[0].tcache.read_accesses =
-      hits * p->sys.scaling_coefficients[TC_H] +
-      misses * p->sys.scaling_coefficients[TC_M];
-  p->sys.core[0].tcache.read_misses =
-      misses * p->sys.scaling_coefficients[TC_M];
-  sample_perf_counters[TC_H] = hits;
-  sample_perf_counters[TC_M] = misses;
-  // TODO: coalescing logic is counted as part of the caches power (this is not
-  // valid for no-caches architectures)
-}
-
-void gpgpu_sim_wrapper::set_shrd_mem_power(double accesses) {
-  p->sys.core[0].sharedmemory.read_accesses =
-      accesses * p->sys.scaling_coefficients[SHRD_ACC];
-  sample_perf_counters[SHRD_ACC] = accesses;
-}
-
-void gpgpu_sim_wrapper::set_l1cache_power(double read_hits, double read_misses,
-                                          double write_hits,
-                                          double write_misses) {
-  p->sys.core[0].dcache.read_accesses =
-      read_hits * p->sys.scaling_coefficients[DC_RH] +
-      read_misses * p->sys.scaling_coefficients[DC_RM];
-  p->sys.core[0].dcache.read_misses =
-      read_misses * p->sys.scaling_coefficients[DC_RM];
-  p->sys.core[0].dcache.write_accesses =
-      write_hits * p->sys.scaling_coefficients[DC_WH] +
-      write_misses * p->sys.scaling_coefficients[DC_WM];
-  p->sys.core[0].dcache.write_misses =
-      write_misses * p->sys.scaling_coefficients[DC_WM];
-  sample_perf_counters[DC_RH] = read_hits;
-  sample_perf_counters[DC_RM] = read_misses;
-  sample_perf_counters[DC_WH] = write_hits;
-  sample_perf_counters[DC_WM] = write_misses;
-  // TODO: coalescing logic is counted as part of the caches power (this is not
-  // valid for no-caches architectures)
-}
-
-void gpgpu_sim_wrapper::set_l2cache_power(double read_hits, double read_misses,
-                                          double write_hits,
-                                          double write_misses) {
-  p->sys.l2.total_accesses = read_hits * p->sys.scaling_coefficients[L2_RH] +
-                             read_misses * p->sys.scaling_coefficients[L2_RM] +
-                             write_hits * p->sys.scaling_coefficients[L2_WH] +
-                             write_misses * p->sys.scaling_coefficients[L2_WM];
-  p->sys.l2.read_accesses = read_hits * p->sys.scaling_coefficients[L2_RH] +
-                            read_misses * p->sys.scaling_coefficients[L2_RM];
-  p->sys.l2.write_accesses = write_hits * p->sys.scaling_coefficients[L2_WH] +
-                             write_misses * p->sys.scaling_coefficients[L2_WM];
-  p->sys.l2.read_hits = read_hits * p->sys.scaling_coefficients[L2_RH];
-  p->sys.l2.read_misses = read_misses * p->sys.scaling_coefficients[L2_RM];
-  p->sys.l2.write_hits = write_hits * p->sys.scaling_coefficients[L2_WH];
-  p->sys.l2.write_misses = write_misses * p->sys.scaling_coefficients[L2_WM];
-  sample_perf_counters[L2_RH] = read_hits;
-  sample_perf_counters[L2_RM] = read_misses;
-  sample_perf_counters[L2_WH] = write_hits;
-  sample_perf_counters[L2_WM] = write_misses;
-}
-
-void gpgpu_sim_wrapper::set_idle_core_power(double num_idle_core) {
-  p->sys.num_idle_cores = num_idle_core;
-  sample_perf_counters[IDLE_CORE_N] = num_idle_core;
-}
-
-void gpgpu_sim_wrapper::set_duty_cycle_power(double duty_cycle) {
-  p->sys.core[0].pipeline_duty_cycle =
-      duty_cycle * p->sys.scaling_coefficients[PIPE_A];
-  sample_perf_counters[PIPE_A] = duty_cycle;
-}
-
-void gpgpu_sim_wrapper::set_mem_ctrl_power(double reads, double writes,
-                                           double dram_precharge) {
-  p->sys.mc.memory_accesses = reads * p->sys.scaling_coefficients[MEM_RD] +
-                              writes * p->sys.scaling_coefficients[MEM_WR];
-  p->sys.mc.memory_reads = reads * p->sys.scaling_coefficients[MEM_RD];
-  p->sys.mc.memory_writes = writes * p->sys.scaling_coefficients[MEM_WR];
-  p->sys.mc.dram_pre = dram_precharge * p->sys.scaling_coefficients[MEM_PRE];
-  sample_perf_counters[MEM_RD] = reads;
-  sample_perf_counters[MEM_WR] = writes;
-  sample_perf_counters[MEM_PRE] = dram_precharge;
-}
-
-void gpgpu_sim_wrapper::set_exec_unit_power(double fpu_accesses,
-                                            double ialu_accesses,
-                                            double sfu_accesses) {
-  p->sys.core[0].fpu_accesses =
-      fpu_accesses * p->sys.scaling_coefficients[FPU_ACC];
-  // Integer ALU (not present in Tesla)
-  p->sys.core[0].ialu_accesses =
-      ialu_accesses * p->sys.scaling_coefficients[SP_ACC];
-  // Sfu accesses
-  p->sys.core[0].mul_accesses =
-      sfu_accesses * p->sys.scaling_coefficients[SFU_ACC];
-
-  sample_perf_counters[SP_ACC] = ialu_accesses;
-  sample_perf_counters[SFU_ACC] = sfu_accesses;
-  sample_perf_counters[FPU_ACC] = fpu_accesses;
-}
-
-void gpgpu_sim_wrapper::set_active_lanes_power(double sp_avg_active_lane,
-                                               double sfu_avg_active_lane) {
-  p->sys.core[0].sp_average_active_lanes = sp_avg_active_lane;
-  p->sys.core[0].sfu_average_active_lanes = sfu_avg_active_lane;
-}
-
-void gpgpu_sim_wrapper::set_NoC_power(double noc_tot_reads,
-                                      double noc_tot_writes) {
-  p->sys.NoC[0].total_accesses =
-      noc_tot_reads * p->sys.scaling_coefficients[NOC_A] +
-      noc_tot_writes * p->sys.scaling_coefficients[NOC_A];
-  sample_perf_counters[NOC_A] = noc_tot_reads + noc_tot_writes;
-}
-
-void gpgpu_sim_wrapper::power_metrics_calculations() {
-  total_sample_count++;
-  kernel_sample_count++;
-
-  // Current sample power
-  double sample_power =
-      proc->rt_power.readOp.dynamic + sample_cmp_pwr[CONST_DYNAMICP];
-
-  // Average power
-  // Previous + new + constant dynamic power (e.g., dynamic clocking power)
-  kernel_tot_power += sample_power;
-  kernel_power.avg = kernel_tot_power / kernel_sample_count;
-  for (unsigned ind = 0; ind < num_pwr_cmps; ++ind) {
-    kernel_cmp_pwr[ind].avg += (double)sample_cmp_pwr[ind];
-  }
-
-  for (unsigned ind = 0; ind < num_perf_counters; ++ind) {
-    kernel_cmp_perf_counters[ind].avg += (double)sample_perf_counters[ind];
-  }
-
-  // Max Power
-  if (sample_power > kernel_power.max) {
-    kernel_power.max = sample_power;
-    for (unsigned ind = 0; ind < num_pwr_cmps; ++ind) {
-      kernel_cmp_pwr[ind].max = (double)sample_cmp_pwr[ind];
-    }
-    for (unsigned ind = 0; ind < num_perf_counters; ++ind) {
-      kernel_cmp_perf_counters[ind].max = sample_perf_counters[ind];
-    }
-  }
-
-  // Min Power
-  if (sample_power < kernel_power.min || (kernel_power.min == 0)) {
-    kernel_power.min = sample_power;
-    for (unsigned ind = 0; ind < num_pwr_cmps; ++ind) {
-      kernel_cmp_pwr[ind].min = (double)sample_cmp_pwr[ind];
-    }
-    for (unsigned ind = 0; ind < num_perf_counters; ++ind) {
-      kernel_cmp_perf_counters[ind].min = sample_perf_counters[ind];
-    }
-  }
-
-  gpu_tot_power.avg = (gpu_tot_power.avg + sample_power);
-  gpu_tot_power.max =
-      (sample_power > gpu_tot_power.max) ? sample_power : gpu_tot_power.max;
-  gpu_tot_power.min =
-      ((sample_power < gpu_tot_power.min) || (gpu_tot_power.min == 0))
-          ? sample_power
-          : gpu_tot_power.min;
-}
-
-void gpgpu_sim_wrapper::print_trace_files() {
-  open_files();
-
-  for (unsigned i = 0; i < num_perf_counters; ++i) {
-    gzprintf(metric_trace_file, "%f,", sample_perf_counters[i]);
-  }
-  gzprintf(metric_trace_file, "\n");
-
-  gzprintf(power_trace_file, "%f,", proc_power);
-  for (unsigned i = 0; i < num_pwr_cmps; ++i) {
-    gzprintf(power_trace_file, "%f,", sample_cmp_pwr[i]);
-  }
-  gzprintf(power_trace_file, "\n");
-
-  close_files();
-}
-
-void gpgpu_sim_wrapper::update_coefficients() {
-  initpower_coeff[FP_INT] = proc->cores[0]->get_coefficient_fpint_insts();
-  effpower_coeff[FP_INT] =
-      initpower_coeff[FP_INT] * p->sys.scaling_coefficients[FP_INT];
-
-  initpower_coeff[TOT_INST] = proc->cores[0]->get_coefficient_tot_insts();
-  effpower_coeff[TOT_INST] =
-      initpower_coeff[TOT_INST] * p->sys.scaling_coefficients[TOT_INST];
-
-  initpower_coeff[REG_RD] =
-      proc->cores[0]->get_coefficient_regreads_accesses() *
-      (proc->cores[0]->exu->rf_fu_clockRate / proc->cores[0]->exu->clockRate);
-  initpower_coeff[REG_WR] =
-      proc->cores[0]->get_coefficient_regwrites_accesses() *
-      (proc->cores[0]->exu->rf_fu_clockRate / proc->cores[0]->exu->clockRate);
-  initpower_coeff[NON_REG_OPs] =
-      proc->cores[0]->get_coefficient_noregfileops_accesses() *
-      (proc->cores[0]->exu->rf_fu_clockRate / proc->cores[0]->exu->clockRate);
-  effpower_coeff[REG_RD] =
-      initpower_coeff[REG_RD] * p->sys.scaling_coefficients[REG_RD];
-  effpower_coeff[REG_WR] =
-      initpower_coeff[REG_WR] * p->sys.scaling_coefficients[REG_WR];
-  effpower_coeff[NON_REG_OPs] =
-      initpower_coeff[NON_REG_OPs] * p->sys.scaling_coefficients[NON_REG_OPs];
-
-  initpower_coeff[IC_H] = proc->cores[0]->get_coefficient_icache_hits();
-  initpower_coeff[IC_M] = proc->cores[0]->get_coefficient_icache_misses();
-  effpower_coeff[IC_H] =
-      initpower_coeff[IC_H] * p->sys.scaling_coefficients[IC_H];
-  effpower_coeff[IC_M] =
-      initpower_coeff[IC_M] * p->sys.scaling_coefficients[IC_M];
-
-  initpower_coeff[CC_H] = (proc->cores[0]->get_coefficient_ccache_readhits() +
-                           proc->get_coefficient_readcoalescing());
-  initpower_coeff[CC_M] = (proc->cores[0]->get_coefficient_ccache_readmisses() +
-                           proc->get_coefficient_readcoalescing());
-  effpower_coeff[CC_H] =
-      initpower_coeff[CC_H] * p->sys.scaling_coefficients[CC_H];
-  effpower_coeff[CC_M] =
-      initpower_coeff[CC_M] * p->sys.scaling_coefficients[CC_M];
-
-  initpower_coeff[TC_H] = (proc->cores[0]->get_coefficient_tcache_readhits() +
-                           proc->get_coefficient_readcoalescing());
-  initpower_coeff[TC_M] = (proc->cores[0]->get_coefficient_tcache_readmisses() +
-                           proc->get_coefficient_readcoalescing());
-  effpower_coeff[TC_H] =
-      initpower_coeff[TC_H] * p->sys.scaling_coefficients[TC_H];
-  effpower_coeff[TC_M] =
-      initpower_coeff[TC_M] * p->sys.scaling_coefficients[TC_M];
-
-  initpower_coeff[SHRD_ACC] =
-      proc->cores[0]->get_coefficient_sharedmemory_readhits();
-  effpower_coeff[SHRD_ACC] =
-      initpower_coeff[SHRD_ACC] * p->sys.scaling_coefficients[SHRD_ACC];
-
-  initpower_coeff[DC_RH] = (proc->cores[0]->get_coefficient_dcache_readhits() +
-                            proc->get_coefficient_readcoalescing());
-  initpower_coeff[DC_RM] =
-      (proc->cores[0]->get_coefficient_dcache_readmisses() +
-       proc->get_coefficient_readcoalescing());
-  initpower_coeff[DC_WH] = (proc->cores[0]->get_coefficient_dcache_writehits() +
-                            proc->get_coefficient_writecoalescing());
-  initpower_coeff[DC_WM] =
-      (proc->cores[0]->get_coefficient_dcache_writemisses() +
-       proc->get_coefficient_writecoalescing());
-  effpower_coeff[DC_RH] =
-      initpower_coeff[DC_RH] * p->sys.scaling_coefficients[DC_RH];
-  effpower_coeff[DC_RM] =
-      initpower_coeff[DC_RM] * p->sys.scaling_coefficients[DC_RM];
-  effpower_coeff[DC_WH] =
-      initpower_coeff[DC_WH] * p->sys.scaling_coefficients[DC_WH];
-  effpower_coeff[DC_WM] =
-      initpower_coeff[DC_WM] * p->sys.scaling_coefficients[DC_WM];
-
-  initpower_coeff[L2_RH] = proc->get_coefficient_l2_read_hits();
-  initpower_coeff[L2_RM] = proc->get_coefficient_l2_read_misses();
-  initpower_coeff[L2_WH] = proc->get_coefficient_l2_write_hits();
-  initpower_coeff[L2_WM] = proc->get_coefficient_l2_write_misses();
-  effpower_coeff[L2_RH] =
-      initpower_coeff[L2_RH] * p->sys.scaling_coefficients[L2_RH];
-  effpower_coeff[L2_RM] =
-      initpower_coeff[L2_RM] * p->sys.scaling_coefficients[L2_RM];
-  effpower_coeff[L2_WH] =
-      initpower_coeff[L2_WH] * p->sys.scaling_coefficients[L2_WH];
-  effpower_coeff[L2_WM] =
-      initpower_coeff[L2_WM] * p->sys.scaling_coefficients[L2_WM];
-
-  initpower_coeff[IDLE_CORE_N] =
-      p->sys.idle_core_power * proc->cores[0]->executionTime;
-  effpower_coeff[IDLE_CORE_N] =
-      initpower_coeff[IDLE_CORE_N] * p->sys.scaling_coefficients[IDLE_CORE_N];
-
-  initpower_coeff[PIPE_A] = proc->cores[0]->get_coefficient_duty_cycle();
-  effpower_coeff[PIPE_A] =
-      initpower_coeff[PIPE_A] * p->sys.scaling_coefficients[PIPE_A];
-
-  initpower_coeff[MEM_RD] = proc->get_coefficient_mem_reads();
-  initpower_coeff[MEM_WR] = proc->get_coefficient_mem_writes();
-  initpower_coeff[MEM_PRE] = proc->get_coefficient_mem_pre();
-  effpower_coeff[MEM_RD] =
-      initpower_coeff[MEM_RD] * p->sys.scaling_coefficients[MEM_RD];
-  effpower_coeff[MEM_WR] =
-      initpower_coeff[MEM_WR] * p->sys.scaling_coefficients[MEM_WR];
-  effpower_coeff[MEM_PRE] =
-      initpower_coeff[MEM_PRE] * p->sys.scaling_coefficients[MEM_PRE];
-
-  initpower_coeff[SP_ACC] =
-      proc->cores[0]->get_coefficient_ialu_accesses() *
-      (proc->cores[0]->exu->rf_fu_clockRate / proc->cores[0]->exu->clockRate);
-  ;
-  initpower_coeff[SFU_ACC] = proc->cores[0]->get_coefficient_sfu_accesses();
-  initpower_coeff[FPU_ACC] = proc->cores[0]->get_coefficient_fpu_accesses();
-
-  effpower_coeff[SP_ACC] =
-      initpower_coeff[SP_ACC] * p->sys.scaling_coefficients[SP_ACC];
-  effpower_coeff[SFU_ACC] =
-      initpower_coeff[SFU_ACC] * p->sys.scaling_coefficients[SFU_ACC];
-  effpower_coeff[FPU_ACC] =
-      initpower_coeff[FPU_ACC] * p->sys.scaling_coefficients[FPU_ACC];
-
-  initpower_coeff[NOC_A] = proc->get_coefficient_noc_accesses();
-  effpower_coeff[NOC_A] =
-      initpower_coeff[NOC_A] * p->sys.scaling_coefficients[NOC_A];
-
-  const_dynamic_power =
-      proc->get_const_dynamic_power() / (proc->cores[0]->executionTime);
-
-  for (unsigned i = 0; i < num_perf_counters; i++) {
-    initpower_coeff[i] /= (proc->cores[0]->executionTime);
-    effpower_coeff[i] /= (proc->cores[0]->executionTime);
-  }
-}
-
-void gpgpu_sim_wrapper::update_components_power() {
-  update_coefficients();
-
-  proc_power = proc->rt_power.readOp.dynamic;
-
-  sample_cmp_pwr[IBP] =
-      (proc->cores[0]->ifu->IB->rt_power.readOp.dynamic +
-       proc->cores[0]->ifu->IB->rt_power.writeOp.dynamic +
-       proc->cores[0]->ifu->ID_misc->rt_power.readOp.dynamic +
-       proc->cores[0]->ifu->ID_operand->rt_power.readOp.dynamic +
-       proc->cores[0]->ifu->ID_inst->rt_power.readOp.dynamic) /
-      (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[ICP] = proc->cores[0]->ifu->icache.rt_power.readOp.dynamic /
-                        (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[DCP] = proc->cores[0]->lsu->dcache.rt_power.readOp.dynamic /
-                        (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[TCP] = proc->cores[0]->lsu->tcache.rt_power.readOp.dynamic /
-                        (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[CCP] = proc->cores[0]->lsu->ccache.rt_power.readOp.dynamic /
-                        (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[SHRDP] =
-      proc->cores[0]->lsu->sharedmemory.rt_power.readOp.dynamic /
-      (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[RFP] =
-      (proc->cores[0]->exu->rfu->rt_power.readOp.dynamic /
-       (proc->cores[0]->executionTime)) *
-      (proc->cores[0]->exu->rf_fu_clockRate / proc->cores[0]->exu->clockRate);
-
-  sample_cmp_pwr[SPP] =
-      (proc->cores[0]->exu->exeu->rt_power.readOp.dynamic /
-       (proc->cores[0]->executionTime)) *
-      (proc->cores[0]->exu->rf_fu_clockRate / proc->cores[0]->exu->clockRate);
-
-  sample_cmp_pwr[SFUP] = (proc->cores[0]->exu->mul->rt_power.readOp.dynamic /
-                          (proc->cores[0]->executionTime));
-
-  sample_cmp_pwr[FPUP] = (proc->cores[0]->exu->fp_u->rt_power.readOp.dynamic /
-                          (proc->cores[0]->executionTime));
-
-  sample_cmp_pwr[SCHEDP] = proc->cores[0]->exu->scheu->rt_power.readOp.dynamic /
-                           (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[L2CP] = (proc->XML->sys.number_of_L2s > 0)
-                             ? proc->l2array[0]->rt_power.readOp.dynamic /
-                                   (proc->cores[0]->executionTime)
-                             : 0;
-
-  sample_cmp_pwr[MCP] = (proc->mc->rt_power.readOp.dynamic -
-                         proc->mc->dram->rt_power.readOp.dynamic) /
-                        (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[NOCP] =
-      proc->nocs[0]->rt_power.readOp.dynamic / (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[DRAMP] =
-      proc->mc->dram->rt_power.readOp.dynamic / (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[PIPEP] =
-      proc->cores[0]->Pipeline_energy / (proc->cores[0]->executionTime);
-
-  sample_cmp_pwr[IDLE_COREP] =
-      proc->cores[0]->IdleCoreEnergy / (proc->cores[0]->executionTime);
-
-  // This constant dynamic power (e.g., clock power) part is estimated via
-  // regression model.
-  sample_cmp_pwr[CONST_DYNAMICP] = 0;
-  double cnst_dyn =
-      proc->get_const_dynamic_power() / (proc->cores[0]->executionTime);
-  // If the regression scaling term is greater than the recorded constant
-  // dynamic power then use the difference (other portion already added to
-  // dynamic power). Else, all the constant dynamic power is accounted for, add
-  // nothing.
-  if (p->sys.scaling_coefficients[CONST_DYNAMICN] > cnst_dyn)
-    sample_cmp_pwr[CONST_DYNAMICP] =
-        (p->sys.scaling_coefficients[CONST_DYNAMICN] - cnst_dyn);
-
-  proc_power += sample_cmp_pwr[CONST_DYNAMICP];
-
-  double sum_pwr_cmp = 0;
-  for (unsigned i = 0; i < num_pwr_cmps; i++) {
-    sum_pwr_cmp += sample_cmp_pwr[i];
-  }
-  bool check = false;
-  check = sanity_check(sum_pwr_cmp, proc_power);
-  assert("Total Power does not equal the sum of the components\n" && (check));
-}
-
-void gpgpu_sim_wrapper::compute() { proc->compute(); }
-void gpgpu_sim_wrapper::print_power_kernel_stats(
-    double gpu_sim_cycle, double gpu_tot_sim_cycle, double init_value,
-    const std::string& kernel_info_string, bool print_trace) {
-  detect_print_steady_state(1, init_value);
-  if (g_power_simulation_enabled) {
-    powerfile << kernel_info_string << std::endl;
-
-    sanity_check((kernel_power.avg * kernel_sample_count), kernel_tot_power);
-    powerfile << "Kernel Average Power Data:" << std::endl;
-    powerfile << "kernel_avg_power = " << kernel_power.avg << std::endl;
-
-    for (unsigned i = 0; i < num_pwr_cmps; ++i) {
-      powerfile << "gpu_avg_" << pwr_cmp_label[i] << " = "
-                << kernel_cmp_pwr[i].avg / kernel_sample_count << std::endl;
-    }
-    for (unsigned i = 0; i < num_perf_counters; ++i) {
-      powerfile << "gpu_avg_" << perf_count_label[i] << " = "
-                << kernel_cmp_perf_counters[i].avg / kernel_sample_count
-                << std::endl;
-    }
-
-    powerfile << std::endl << "Kernel Maximum Power Data:" << std::endl;
-    powerfile << "kernel_max_power = " << kernel_power.max << std::endl;
-    for (unsigned i = 0; i < num_pwr_cmps; ++i) {
-      powerfile << "gpu_max_" << pwr_cmp_label[i] << " = "
-                << kernel_cmp_pwr[i].max << std::endl;
-    }
-    for (unsigned i = 0; i < num_perf_counters; ++i) {
-      powerfile << "gpu_max_" << perf_count_label[i] << " = "
-                << kernel_cmp_perf_counters[i].max << std::endl;
-    }
-
-    powerfile << std::endl << "Kernel Minimum Power Data:" << std::endl;
-    powerfile << "kernel_min_power = " << kernel_power.min << std::endl;
-    for (unsigned i = 0; i < num_pwr_cmps; ++i) {
-      powerfile << "gpu_min_" << pwr_cmp_label[i] << " = "
-                << kernel_cmp_pwr[i].min << std::endl;
-    }
-    for (unsigned i = 0; i < num_perf_counters; ++i) {
-      powerfile << "gpu_min_" << perf_count_label[i] << " = "
-                << kernel_cmp_perf_counters[i].min << std::endl;
-    }
-
-    powerfile << std::endl
-              << "Accumulative Power Statistics Over Previous Kernels:"
-              << std::endl;
-    powerfile << "gpu_tot_avg_power = "
-              << gpu_tot_power.avg / total_sample_count << std::endl;
-    powerfile << "gpu_tot_max_power = " << gpu_tot_power.max << std::endl;
-    powerfile << "gpu_tot_min_power = " << gpu_tot_power.min << std::endl;
-    powerfile << std::endl << std::endl;
-    powerfile.flush();
-
-    if (print_trace) {
-      print_trace_files();
-    }
-  }
-}
-void gpgpu_sim_wrapper::dump() {
-  if (g_power_per_cycle_dump) proc->displayEnergy(2, 5);
-}
-
-void gpgpu_sim_wrapper::print_steady_state(int position, double init_val) {
-  double temp_avg = sample_val / (double)samples.size();
-  double temp_ipc = (init_val - init_inst_val) /
-                    (double)(samples.size() * gpu_stat_sample_freq);
-
-  if ((samples.size() >
-       gpu_steady_min_period)) {  // If steady state occurred for some time,
-                                  // print to file
-    has_written_avg = true;
-    gzprintf(steady_state_tacking_file, "%u,%d,%f,%f,", sample_start,
-             total_sample_count, temp_avg, temp_ipc);
-    for (unsigned i = 0; i < num_perf_counters; ++i) {
-      gzprintf(steady_state_tacking_file, "%f,",
-               samples_counter.at(i) / ((double)samples.size()));
-    }
-    gzprintf(steady_state_tacking_file, "\n");
-  } else {
-    if (!has_written_avg && position)
-      gzprintf(steady_state_tacking_file,
-               "ERROR! Not enough steady state points to generate average\n");
-  }
-
-  sample_start = 0;
-  sample_val = 0;
-  init_inst_val = init_val;
-  samples.clear();
-  samples_counter.clear();
-  pwr_counter.clear();
-  assert(samples.size() == 0);
-}
-
-void gpgpu_sim_wrapper::detect_print_steady_state(int position,
-                                                  double init_val) {
-  // Calculating Average
-  if (g_power_simulation_enabled && g_steady_power_levels_enabled) {
-    steady_state_tacking_file = gzopen(g_steady_state_tracking_filename, "a");
-    if (position == 0) {
-      if (samples.size() == 0) {
-        // First sample
-        sample_start = total_sample_count;
-        sample_val = proc->rt_power.readOp.dynamic;
-        init_inst_val = init_val;
-        samples.push_back(proc->rt_power.readOp.dynamic);
-        assert(samples_counter.size() == 0);
-        assert(pwr_counter.size() == 0);
-
-        for (unsigned i = 0; i < (num_perf_counters); ++i) {
-          samples_counter.push_back(sample_perf_counters[i]);
-        }
-
-        for (unsigned i = 0; i < (num_pwr_cmps); ++i) {
-          pwr_counter.push_back(sample_cmp_pwr[i]);
-        }
-        assert(pwr_counter.size() == (double)num_pwr_cmps);
-        assert(samples_counter.size() == (double)num_perf_counters);
-      } else {
-        // Get current average
-        double temp_avg = sample_val / (double)samples.size();
-
-        if (abs(proc->rt_power.readOp.dynamic - temp_avg) <
-            gpu_steady_power_deviation) {  // Value is within threshold
-          sample_val += proc->rt_power.readOp.dynamic;
-          samples.push_back(proc->rt_power.readOp.dynamic);
-          for (unsigned i = 0; i < (num_perf_counters); ++i) {
-            samples_counter.at(i) += sample_perf_counters[i];
-          }
-
-          for (unsigned i = 0; i < (num_pwr_cmps); ++i) {
-            pwr_counter.at(i) += sample_cmp_pwr[i];
-          }
-
-        } else {  // Value exceeds threshold, not considered steady state
-          print_steady_state(position, init_val);
-        }
-      }
-    } else {
-      print_steady_state(position, init_val);
-    }
-    gzclose(steady_state_tacking_file);
-  }
-}
-
-void gpgpu_sim_wrapper::open_files() {
-  if (g_power_simulation_enabled) {
-    if (g_power_trace_enabled) {
-      power_trace_file = gzopen(g_power_trace_filename, "a");
-      metric_trace_file = gzopen(g_metric_trace_filename, "a");
-    }
-  }
-}
-void gpgpu_sim_wrapper::close_files() {
-  if (g_power_simulation_enabled) {
-    if (g_power_trace_enabled) {
-      gzclose(power_trace_file);
-      gzclose(metric_trace_file);
-    }
-  }
-}
diff --git a/version b/version
index c832e56..09e18b1 100644
--- a/version
+++ b/version
@@ -1 +1 @@
-const char *g_gpgpusim_version_string = "GPGPU-Sim Simulator Version 4.1.0 ";
+const char *g_gpgpusim_version_string = "GPGPU-Sim Simulator Version 4.2.0 ";