aboutsummaryrefslogtreecommitdiff
path: root/src/gpgpu-sim
AgeCommit message (Collapse)Author
2014-08-14Removing a couple of warningsAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12564]
2014-08-14Fixing typoAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12383]
2014-08-14A much easier way to attempt to fix the problem targeted by CL12362 is to ↵Andrew M. B. Boktor
just print the stats whenever a kernel is done. This requires decoupling updating the stats from printing them and modifying the printing code to accomodate this change. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12366]
2014-08-14Removing some bottlenecks that limit that peak-IPCAndrew M. B. Boktor
- FUs depended on the result bus to know if they are going to be used on a certain cycle, this is not the case anymore, occupied bitvectors are added - A configurable number of result buses is added (the number of buses is equal to the EX_WB pipe width) - Modified the Fermi config file to add two ports to the operand collector IPC with a theoretical limit of number_of_SMs*64 is achievable using this configuration [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12349]
2014-08-14Integrated in CL12342 from coherence branch; fix for bug #160Inderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12343]
2014-08-14Adding configurable instruction latencies and initiation intervalsAndrew M. B. Boktor
The observed latencies are reduced by 5 to account for other stages in the SM pipeline Eventually this should be calibrated against the microbenchmarks [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12310]
2014-08-14Using only move_out_to to move pipeline registersAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12305]
2014-08-14Integrated in CL12250 from coherence branch - fix for atomic payload bug ↵Inderpreet Singh
(see Bug #133) [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12257]
2014-08-14Changing writeback arbitration among multiple clients ↵Wilson Fung
(shared,tex,const,global/local,L1D) in ldst unit to round-robin. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12248]
2014-08-14Removing a wrong commentAndrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12203]
2014-08-14This changelist adds the following:Andrew M. B. Boktor
1. A configurable number of functional units within each SM 2. A configurable pipeline widths (i.e. Issue width, writeback width ...). Merging //depot/gpgpu_sim_research/fermi_replay/distribution/src/... to //depot/gpgpu_sim_research/fermi/distribution/src/... [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12091]
2014-08-14Changing the configs to be backward compatible by disabling bank groups by ↵Andrew M. B. Boktor
default if its configurations are not present [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12033]
2014-08-14This changelist implements the following:Andrew M. B. Boktor
1. Adds support for using cuobjdump for both ptx and ptxplus execution. This has been tested with CUDA 4.0 . Ptxplus is no longer supported through decuda/decuda_to_ptxplus 2. Adds support for converting the SASS output by cuobjdump to ptxplus. This has been tested with CUDA 4.0 . The old path that extracts ptx from cubin files is still preserved 3. Adds a bank group model. (WARNING: memory config has changed, please adapt yours). To disable the bank groups model, set nbkgrp to 1 and tCCDL and tRTPL to 0 Diff the configuration files to learn about how to use those new options. Merging //depot/gpgpu_sim_research/fermi-test/distribution/... to //depot/gpgpu_sim_research/fermi/distribution/... [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 12023]
2014-08-14Integration change. Fixing bug for #149: A pathological case that caused LD ↵Wilson Fung
instructions to be over counted when the LD instruction is stalled for a long time after sending part of its memory requests. Those memory requests manage to return before the LD is done sending all of its requests. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11888]
2014-08-14-Bug 146 fix (Adding perfect memory interface)Ahmed El-Shafiey
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11877]
2014-08-14Fixing bug 145. Now partition_address() works for non-power-of-two number ↵Wilson Fung
of memory partition as well (before it just leaves the memory address unchanged!). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11755]
2014-08-14Adding a description of what assumptions are made.Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11728]
2014-08-14Fixing a bug introduced by the fix of bug 142Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11725]
2014-08-14Fix for bug 142Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11724]
2014-08-14change copyright noticeTor Aamodt
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11588]
2014-08-14Forgot to remove the commented incorrect code in addrdec.cc.Wilson Fung
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11577]
2014-08-14Changed arch_rech type to store 16 registers, 8 input and 8 output. 8 inputs ↵Inderpreet Singh
because one can have 4 input operands and 4 register operands in a surface store instruction. Fixed arch_regs for memory instructions being ignored in the pre-decode statge. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11576]
2014-08-14Cleaned up the sweep_test() in addrdec.cc to use tr1_hash_map.Wilson Fung
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11575]
2014-08-14Fixed bug 137. Now memory address mapping with non-power-of-two memory ↵Wilson Fung
partitions will not lead to address aliasing. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11574]
2014-08-14Fixed the how the Pending Hits are displayed in simulation logs. See Bug ↵Wilson Fung
136 for details. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11530]
2014-08-14Now atomic operation will change the cache line status to modified at a hit, ↵Wilson Fung
and set the line to modified at fill (when it misses the cache). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11527]
2014-08-14Changing the defaults for ROP and DRAM latency to match Quadro config as ↵Wilson Fung
before (totals to 115 cycles of latency). Changing the Fermi config to specify the different latency parameters. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11523]
2014-08-14Turned ROP and DRAM latency/delays into optionsInderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11522]
2014-08-14Added fixed latency queue for modeling DRAM latencyInderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11521]
2014-08-14Adding a check for copmliance between the runtime simulation config and ↵Wilson Fung
MAX_THREAD_PER_SM. Also decreased LOCAL_MEM_SIZE_MAX to 8kB to make it fit within our allotted memory space (otherwise the simulator may mistaken global memory access as local memory accesses). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11520]
2014-08-14Changes needed for the new fermi configs to work.Andrew M. B. Boktor
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11511]
2014-08-14Adding option 'gpgpu_simt_core_sim_order' which allow the user to specify ↵Wilson Fung
the order in which cores are simulator per cycle. Also adding support for calling function with empty parameter list. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11489]
2014-08-14Fix for bug 129. Created a directed test with a pre-known instruction count, ↵Wilson Fung
and observed the over-count for vector memory instruction. The fix eliminates the over-count. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11481]
2014-08-14Grouped all instruction counting code into a common member function in ↵Wilson Fung
shader_core_ctx. Now m_num_sim_insn counts scalar thread instructions. A new counter is added for warp instructions. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11472]
2014-08-14Fixed the stat collection for gpgpu_n_shmem_insn. See Bug 128 for more ↵Wilson Fung
detail. For verification, I added a directed test with a pre-calculated number of shared memory instructions. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11454]
2014-08-14Fixing bug 126. Now DXTC runs to completion by not giving correct result ↵Wilson Fung
(expected). The key is that the missing function is now in place. Also removed reference to print_shader_cycle_distro() (this is deprecated by AerialVision). [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11346]
2014-08-14A small bug fix, the dupm pipeline was crashing if the L1 data cache is ↵Ahmed El-Shafiey
disabled, it was trying to print its content, even though. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11340]
2014-08-14Revived all of the source code view stats except exposed pipeline latency.Wilson Fung
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11329]
2014-08-14Revived PC-Histogram in AerialVision.Wilson Fung
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11308]
2014-08-14Integrating the pure functional simulationAyub Gubran
Merging //depot/gpgpu_sim_research/fermi_ayoub/distribution/src/gpgpu-sim/gpu-sim.cc //depot/gpgpu_sim_research/fermi_ayoub/distribution/src/gpgpu-sim/gpu-sim.h //depot/gpgpu_sim_research/fermi_ayoub/distribution/src/gpgpu-sim/shader.cc //depot/gpgpu_sim_research/fermi_ayoub/distribution/src/gpgpu-sim/shader.h to //depot/gpgpu_sim_research/fermi/distribution/src/gpgpu-sim/... [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11287]
2014-08-14Fix for Bug 118: Cache line size restrictionsInderpreet Singh
Added an assertion that checks to make sure that incoming mem_fetch size is less than or equal to cache's line size. This requires non-decreasing line sizes going down the cache heirarchy. Changed Quadro's texture L2 cache to have 256B lines (because of above restriction and instruction cache having 256B lines; Henry's paper also observed 256B line size for L2). Increased total L2 size to 256KB from 128KB as per Henry's paper. From ISPASS, SDK, and RODINIA benchmarks, only MUM and MGST are affected with a 30% slowdown. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11253]
2014-08-14Fix for Bug 117 - Cannot disable L2 caches.Inderpreet Singh
Disabling L2 caches bypasses L2 cache. Note that memory partition is still clocked at the L2 frequency. [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11235]
2014-08-14Fix for Bug 124 - ld.local.s8 instructions are not supportedInderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11231]
2014-08-14Fix for Bug 123: Use of constant in shader_core_ctx::func_exec_inst functionInderpreet Singh
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11227]
2014-08-14Integration change. mem_divergence 10699 which uses a tuple file for this ↵Tim Rogers
explicit string/enum dependency. Removes a bug when doing debug priting caused by walking off the end of the named list because someone forgot to update the string array [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11143]
2014-08-14bz 122 - Fixing the rate descpency between ldst_unit::cycle and ↵Tim Rogers
ldst_unit::writeback [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11085]
2014-08-14Printing out the simulation rateTim Rogers
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 11066]
2014-08-14Back out changelist 10951Hadi Jooybar
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 10963]
2014-08-14Should be tested.Hadi Jooybar
Does not support sm_20 [git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 10951]
2014-08-14Making the default L2 something saneTim Rogers
[git-p4: depot-paths = "//depot/gpgpu_sim_research/fermi/distribution/": change = 10899]
generated by cgit v1.3 (git 2.53.0) at 2026-07-13 17:47:10 +0000